[openwrt/staging/blocktrron.git] /

From 487f3643b6031dd98ef176841e1c15889e3f3d2f Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Mon, 22 Jul 2019 22:13:30 +0800
Subject: [PATCH 744/782] staging: bcm2835-codec: implement
 V4L2_CID_MIN_BUFFERS_FOR_CAPTURE

The stateful decoder specification shows an optional step for retrieving
the miminum number of capture buffers required for the decoder to
proceed. While not a required parameter, having it makes some
applications happy.

bcm2835-codec is a little different from other decoder implementations
in that there is an intermediate format conversion between the hardware
and V4L2 buffers. The number of capture buffers required is therefore
independent of the stream and DPB etc.

There are plans to remove the conversion, but it requires a fair amount
of rework within the firmware. Until that is done, simply return a value
of 1.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 .../vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c
+++ b/drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c
@@ -2357,6 +2357,18 @@ static int bcm2835_codec_open(struct fil
                }
                ctx->fh.ctrl_handler = hdl;
                v4l2_ctrl_handler_setup(hdl);
+       } else if (dev->role == DECODE) {
+               v4l2_ctrl_handler_init(hdl, 1);
+
+               v4l2_ctrl_new_std(hdl, &bcm2835_codec_ctrl_ops,
+                                 V4L2_CID_MIN_BUFFERS_FOR_CAPTURE,
+                                 1, 1, 1, 1);
+               if (hdl->error) {
+                       rc = hdl->error;
+                       goto free_ctrl_handler;
+               }
+               ctx->fh.ctrl_handler = hdl;
+               v4l2_ctrl_handler_setup(hdl);
        }
 
        ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev, ctx, &queue_init);