git.openwrt.org Git - openwrt/staging/linusw.git/blob

   1 From d884dfd722a8207749f5c6c08b69287f0c75a553 Mon Sep 17 00:00:00 2001
   2 From: Stefan Wahren <wahrenst@gmx.net>
   3 Date: Fri, 27 Dec 2019 16:06:13 +0100
   4 Subject: [PATCH] ARM: dts: bcm283x: Move pixelvalve to
   5  bcm2835-common.dtsi
   6
   7 According to Eric Anholt the pixelvalves doesn't exists on BCM2711.
   8 So move it to bcm2835-common.dtsi.
   9
  10 Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
  11 ---
  12  arch/arm/boot/dts/bcm2835-common.dtsi | 18 ++++++++++++++++++
  13  arch/arm/boot/dts/bcm2838.dtsi        | 12 ------------
  14  arch/arm/boot/dts/bcm283x.dtsi        | 18 ------------------
  15  3 files changed, 18 insertions(+), 30 deletions(-)
  16
  17 --- a/arch/arm/boot/dts/bcm2835-common.dtsi
  18 +++ b/arch/arm/boot/dts/bcm2835-common.dtsi
  19 @@ -13,6 +13,18 @@
  20                         #interrupt-cells = <2>;
  21                 };
  22
  23 +               pixelvalve@7e206000 {
  24 +                       compatible = "brcm,bcm2835-pixelvalve0";
  25 +                       reg = <0x7e206000 0x100>;
  26 +                       interrupts = <2 13>; /* pwa0 */
  27 +               };
  28 +
  29 +               pixelvalve@7e207000 {
  30 +                       compatible = "brcm,bcm2835-pixelvalve1";
  31 +                       reg = <0x7e207000 0x100>;
  32 +                       interrupts = <2 14>; /* pwa1 */
  33 +               };
  34 +
  35                 thermal: thermal@7e212000 {
  36                         compatible = "brcm,bcm2835-thermal";
  37                         reg = <0x7e212000 0x8>;
  38 @@ -21,6 +33,12 @@
  39                         status = "disabled";
  40                 };
  41
  42 +               pixelvalve@7e807000 {
  43 +                       compatible = "brcm,bcm2835-pixelvalve2";
  44 +                       reg = <0x7e807000 0x100>;
  45 +                       interrupts = <2 10>; /* pixelvalve */
  46 +               };
  47 +
  48                 v3d: v3d@7ec00000 {
  49                         compatible = "brcm,bcm2835-v3d";
  50                         reg = <0x7ec00000 0x1000>;
  51 --- a/arch/arm/boot/dts/bcm2838.dtsi
  52 +++ b/arch/arm/boot/dts/bcm2838.dtsi
  53 @@ -188,14 +188,6 @@
  54                         status = "disabled";
  55                 };
  56
  57 -               pixelvalve@7e206000 {
  58 -                       interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
  59 -               };
  60 -
  61 -               pixelvalve@7e207000 {
  62 -                       interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
  63 -               };
  64 -
  65                 pwm1: pwm@7e20c800 {
  66                         compatible = "brcm,bcm2835-pwm";
  67                         reg = <0x7e20c800 0x28>;
  68 @@ -217,10 +209,6 @@
  69                 hvs@7e400000 {
  70                         interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
  71                 };
  72 -
  73 -               pixelvalve@7e807000 {
  74 -                       interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
  75 -               };
  76         };
  77
  78         arm-pmu {
  79 --- a/arch/arm/boot/dts/bcm283x.dtsi
  80 +++ b/arch/arm/boot/dts/bcm283x.dtsi
  81 @@ -432,18 +432,6 @@
  82                         status = "disabled";
  83                 };
  84
  85 -               pixelvalve@7e206000 {
  86 -                       compatible = "brcm,bcm2835-pixelvalve0";
  87 -                       reg = <0x7e206000 0x100>;
  88 -                       interrupts = <2 13>; /* pwa0 */
  89 -               };
  90 -
  91 -               pixelvalve@7e207000 {
  92 -                       compatible = "brcm,bcm2835-pixelvalve1";
  93 -                       reg = <0x7e207000 0x100>;
  94 -                       interrupts = <2 14>; /* pwa1 */
  95 -               };
  96 -
  97                 dpi: dpi@7e208000 {
  98                         compatible = "brcm,bcm2835-dpi";
  99                         reg = <0x7e208000 0x8c>;
 100 @@ -608,12 +596,6 @@
 101                         status = "disabled";
 102                 };
 103
 104 -               pixelvalve@7e807000 {
 105 -                       compatible = "brcm,bcm2835-pixelvalve2";
 106 -                       reg = <0x7e807000 0x100>;
 107 -                       interrupts = <2 10>; /* pixelvalve */
 108 -               };
 109 -
 110                 hdmi: hdmi@7e902000 {
 111                         compatible = "brcm,bcm2835-hdmi";
 112                         reg = <0x7e902000 0x600>,