[openwrt/staging/jow.git] /

From ba24f07c814a4d0527fa5821834cded70ac705be Mon Sep 17 00:00:00 2001
From: Stefan Wahren <wahrenst@gmx.net>
Date: Sun, 19 May 2019 12:26:21 +0200
Subject: [PATCH 638/703] ARM: dts: bcm283x: Move BCM2835/6/7 specific to
 bcm2835-common.dtsi

We want all common BCM2835/6/7/8 functions in bcm283x.dtsi and all
BCM2835/6/7 specific in the new bcm2835-common.dtsi.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
---
 arch/arm/boot/dts/bcm2835-common.dtsi | 53 +++++++++++++++++++++++++++
 arch/arm/boot/dts/bcm2835.dtsi        |  1 +
 arch/arm/boot/dts/bcm2836.dtsi        |  1 +
 arch/arm/boot/dts/bcm2837.dtsi        |  1 +
 arch/arm/boot/dts/bcm283x.dtsi        | 43 +---------------------
 5 files changed, 57 insertions(+), 42 deletions(-)
 create mode 100644 arch/arm/boot/dts/bcm2835-common.dtsi

--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-common.dtsi
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* This include file covers the common peripherals and configuration between
+ * bcm2835, bcm2836 and bcm2837 implementations.
+ */
+
+/ {
+       soc {
+               timer@7e003000 {
+                       compatible = "brcm,bcm2835-system-timer";
+                       reg = <0x7e003000 0x1000>;
+                       interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
+                       /* This could be a reference to BCM2835_CLOCK_TIMER,
+                        * but we don't have the driver using the common clock
+                        * support yet.
+                        */
+                       clock-frequency = <1000000>;
+               };
+
+               intc: interrupt-controller@7e00b200 {
+                       compatible = "brcm,bcm2835-armctrl-ic";
+                       reg = <0x7e00b200 0x200>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               thermal: thermal@7e212000 {
+                       compatible = "brcm,bcm2835-thermal";
+                       reg = <0x7e212000 0x8>;
+                       clocks = <&clocks BCM2835_CLOCK_TSENS>;
+                       #thermal-sensor-cells = <0>;
+                       status = "disabled";
+               };
+
+               v3d: v3d@7ec00000 {
+                       compatible = "brcm,bcm2835-v3d";
+                       reg = <0x7ec00000 0x1000>;
+                       interrupts = <1 10>;
+               };
+       };
+};
+
+&gpio {
+       i2c_slave_gpio18: i2c_slave_gpio18 {
+               brcm,pins = <18 19 20 21>;
+               brcm,function = <BCM2835_FSEL_ALT3>;
+       };
+
+       jtag_gpio4: jtag_gpio4 {
+               brcm,pins = <4 5 6 12 13>;
+               brcm,function = <BCM2835_FSEL_ALT5>;
+       };
+};
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm283x.dtsi"
+#include "bcm2835-common.dtsi"
 
 / {
        compatible = "brcm,bcm2835";
--- a/arch/arm/boot/dts/bcm2836.dtsi
+++ b/arch/arm/boot/dts/bcm2836.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm283x.dtsi"
+#include "bcm2835-common.dtsi"
 
 / {
        compatible = "brcm,bcm2836";
--- a/arch/arm/boot/dts/bcm2837.dtsi
+++ b/arch/arm/boot/dts/bcm2837.dtsi
@@ -1,4 +1,5 @@
 #include "bcm283x.dtsi"
+#include "bcm2835-common.dtsi"
 
 / {
        compatible = "brcm,bcm2837";
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -55,17 +55,6 @@
                #address-cells = <1>;
                #size-cells = <1>;
 
-               timer@7e003000 {
-                       compatible = "brcm,bcm2835-system-timer";
-                       reg = <0x7e003000 0x1000>;
-                       interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
-                       /* This could be a reference to BCM2835_CLOCK_TIMER,
-                        * but we don't have the driver using the common clock
-                        * support yet.
-                        */
-                       clock-frequency = <1000000>;
-               };
-
                txp@7e004000 {
                        compatible = "brcm,bcm2835-txp";
                        reg = <0x7e004000 0x20>;
@@ -113,13 +102,6 @@
                        brcm,dma-channel-mask = <0x7f35>;
                };
 
-               intc: interrupt-controller@7e00b200 {
-                       compatible = "brcm,bcm2835-armctrl-ic";
-                       reg = <0x7e00b200 0x200>;
-                       interrupt-controller;
-                       #interrupt-cells = <2>;
-               };
-
                watchdog@7e100000 {
                        compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
                        #power-domain-cells = <1>;
@@ -183,8 +165,7 @@
                        interrupt-controller;
                        #interrupt-cells = <2>;
 
-                       /* Defines pin muxing groups according to
-                        * BCM2835-ARM-Peripherals.pdf page 102.
+                       /* Defines common pin muxing groups
                         *
                         * While each pin can have its mux selected
                         * for various functions individually, some
@@ -262,15 +243,7 @@
                                brcm,pins = <44 45>;
                                brcm,function = <BCM2835_FSEL_ALT2>;
                        };
-                       i2c_slave_gpio18: i2c_slave_gpio18 {
-                               brcm,pins = <18 19 20 21>;
-                               brcm,function = <BCM2835_FSEL_ALT3>;
-                       };
 
-                       jtag_gpio4: jtag_gpio4 {
-                               brcm,pins = <4 5 6 12 13>;
-                               brcm,function = <BCM2835_FSEL_ALT5>;
-                       };
                        jtag_gpio22: jtag_gpio22 {
                                brcm,pins = <22 23 24 25 26 27>;
                                brcm,function = <BCM2835_FSEL_ALT4>;
@@ -487,14 +460,6 @@
 
                };
 
-               thermal: thermal@7e212000 {
-                       compatible = "brcm,bcm2835-thermal";
-                       reg = <0x7e212000 0x8>;
-                       clocks = <&clocks BCM2835_CLOCK_TSENS>;
-                       #thermal-sensor-cells = <0>;
-                       status = "disabled";
-               };
-
                aux: aux@7e215000 {
                        compatible = "brcm,bcm2835-aux";
                        #clock-cells = <1>;
@@ -660,12 +625,6 @@
                        phy-names = "usb2-phy";
                };
 
-               v3d: v3d@7ec00000 {
-                       compatible = "brcm,bcm2835-v3d";
-                       reg = <0x7ec00000 0x1000>;
-                       interrupts = <1 10>;
-               };
-
                vc4: gpu {
                        compatible = "brcm,bcm2835-vc4";
                };