git.openwrt.org Git - openwrt/staging/hauke.git/blob

   1 From 8c8e60fb86a90a30721bbd797f58f96b3980dcc1 Mon Sep 17 00:00:00 2001
   2 From: Jean-Philippe Brucker <jean-philippe@linaro.org>
   3 Date: Thu, 26 Dec 2019 10:20:33 +0100
   4 Subject: [PATCH] brcmfmac: sdio: Fix OOB interrupt initialization on brcm43362
   5
   6 Commit 262f2b53f679 ("brcmfmac: call brcmf_attach() just before calling
   7 brcmf_bus_started()") changed the initialization order of the brcmfmac
   8 SDIO driver. Unfortunately since brcmf_sdiod_intr_register() is now
   9 called before the sdiodev->bus_if initialization, it reads the wrong
  10 chip ID and fails to initialize the GPIO on brcm43362. Thus the chip
  11 cannot send interrupts and fails to probe:
  12
  13 [   12.517023] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
  14 [   12.531214] ieee80211 phy0: brcmf_bus_started: failed: -110
  15 [   12.536976] ieee80211 phy0: brcmf_attach: dongle is not responding: err=-110
  16 [   12.566467] brcmfmac: brcmf_sdio_firmware_callback: brcmf_attach failed
  17
  18 Initialize the bus interface earlier to ensure that
  19 brcmf_sdiod_intr_register() properly sets up the OOB interrupt.
  20
  21 BugLink: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=908438
  22 Fixes: 262f2b53f679 ("brcmfmac: call brcmf_attach() just before calling brcmf_bus_started()")
  23 Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
  24 Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
  25 Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
  26 ---
  27  .../net/wireless/broadcom/brcm80211/brcmfmac/sdio.c  | 12 ++++++------
  28  1 file changed, 6 insertions(+), 6 deletions(-)
  29
  30 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
  31 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
  32 @@ -4247,6 +4247,12 @@ static void brcmf_sdio_firmware_callback
  33         }
  34
  35         if (err == 0) {
  36 +               /* Assign bus interface call back */
  37 +               sdiod->bus_if->dev = sdiod->dev;
  38 +               sdiod->bus_if->ops = &brcmf_sdio_bus_ops;
  39 +               sdiod->bus_if->chip = bus->ci->chip;
  40 +               sdiod->bus_if->chiprev = bus->ci->chiprev;
  41 +
  42                 /* Allow full data communication using DPC from now on. */
  43                 brcmf_sdiod_change_state(bus->sdiodev, BRCMF_SDIOD_DATA);
  44
  45 @@ -4263,12 +4269,6 @@ static void brcmf_sdio_firmware_callback
  46
  47         sdio_release_host(sdiod->func1);
  48
  49 -       /* Assign bus interface call back */
  50 -       sdiod->bus_if->dev = sdiod->dev;
  51 -       sdiod->bus_if->ops = &brcmf_sdio_bus_ops;
  52 -       sdiod->bus_if->chip = bus->ci->chip;
  53 -       sdiod->bus_if->chiprev = bus->ci->chiprev;
  54 -
  55         err = brcmf_alloc(sdiod->dev, sdiod->settings);
  56         if (err) {
  57                 brcmf_err("brcmf_alloc failed\n");