git.openwrt.org Git - openwrt/staging/neocturne.git/blob

   1 From 43bac4133f405b67857e4c985aecc44a57233bfe Mon Sep 17 00:00:00 2001
   2 From: Martin Sperl <kernel@martin.sperl.org>
   3 Date: Wed, 2 Nov 2016 10:18:23 +0000
   4 Subject: [PATCH] ARM: bcm2835: dts: add thermal node to device-tree of bcm283x
   5
   6 Add the node for the thermal sensor of the bcm2835-soc
   7 to the device tree.
   8
   9 Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
  10 Reviewed-by: Eric Anholt <eric@anholt.net>
  11 Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
  12
  13 Changelog:
  14 V1 -> V5: generic settings is shared in bcm283x.dtsi, but disabled
  15           moved the compatible string to the SOC specific dtsi
  16             for arm and arm64
  17 V5 -> V6: fix remove 0x prefix from thermal@0x7e212000
  18
  19 Note: there is no arm/boot/dts/bcm2837.dtsi as of now,
  20       so the 32-bit rpi3 dt is not modified.
  21 Signed-off-by: Eric Anholt <eric@anholt.net>
  22 ---
  23  arch/arm/boot/dts/bcm2835.dtsi | 6 ++++++
  24  arch/arm/boot/dts/bcm2836.dtsi | 6 ++++++
  25  arch/arm/boot/dts/bcm283x.dtsi | 7 +++++++
  26  3 files changed, 19 insertions(+)
  27
  28 --- a/arch/arm/boot/dts/bcm2835.dtsi
  29 +++ b/arch/arm/boot/dts/bcm2835.dtsi
  30 @@ -23,3 +23,9 @@
  31                 };
  32         };
  33  };
  34 +
  35 +/* enable thermal sensor with the correct compatible property set */
  36 +&thermal {
  37 +       compatible = "brcm,bcm2835-thermal";
  38 +       status = "okay";
  39 +};
  40 --- a/arch/arm/boot/dts/bcm2836.dtsi
  41 +++ b/arch/arm/boot/dts/bcm2836.dtsi
  42 @@ -76,3 +76,9 @@
  43         interrupt-parent = <&local_intc>;
  44         interrupts = <8>;
  45  };
  46 +
  47 +/* enable thermal sensor with the correct compatible property set */
  48 +&thermal {
  49 +       compatible = "brcm,bcm2836-thermal";
  50 +       status = "okay";
  51 +};
  52 --- a/arch/arm/boot/dts/bcm283x.dtsi
  53 +++ b/arch/arm/boot/dts/bcm283x.dtsi
  54 @@ -390,6 +390,13 @@
  55                         interrupts = <2 14>; /* pwa1 */
  56                 };
  57
  58 +               thermal: thermal@7e212000 {
  59 +                       compatible = "brcm,bcm2835-thermal";
  60 +                       reg = <0x7e212000 0x8>;
  61 +                       clocks = <&clocks BCM2835_CLOCK_TSENS>;
  62 +                       status = "disabled";
  63 +               };
  64 +
  65                 aux: aux@0x7e215000 {
  66                         compatible = "brcm,bcm2835-aux";
  67                         #clock-cells = <1>;