git.openwrt.org Git - openwrt/staging/blocktrron.git/blob

   1 From c05ace7510ead96e72b97ce47b33f7b5865d6d36 Mon Sep 17 00:00:00 2001
   2 From: Peter Oh <peter.oh@bowerswilkins.com>
   3 Date: Mon, 27 Aug 2018 14:28:38 -0700
   4 Subject: [PATCH 1/7] mesh: use setup completion callback to complete mesh join
   5
   6 mesh join function is the last function to be called during
   7 mesh join process, but it's been called a bit earlier than
   8 it's supposed to be, so that some mesh parameter values
   9 such as VHT capabilities not applied correct when mesh join
  10 is in process.
  11 Moreover current design of mesh join that is called directly
  12 after mesh initialization isn't suitable for DFS channels to use,
  13 since mesh join process should be paused until DFS CAC is
  14 done and resumed after it's done.
  15 The callback will be called by hostapd_setup_interface_complete_sync.
  16 There is possiblity that completing mesh init fails, so add error
  17 handle codes.
  18
  19 Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
  20 Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
  21 ---
  22  src/ap/hostapd.c      | 11 ++++++++++-
  23  wpa_supplicant/mesh.c | 13 +++++++------
  24  2 files changed, 17 insertions(+), 7 deletions(-)
  25
  26 --- a/src/ap/hostapd.c
  27 +++ b/src/ap/hostapd.c
  28 @@ -434,6 +434,8 @@ static void hostapd_free_hapd_data(struc
  29  #ifdef CONFIG_MESH
  30         wpabuf_free(hapd->mesh_pending_auth);
  31         hapd->mesh_pending_auth = NULL;
  32 +       /* handling setup failure is already done */
  33 +       hapd->setup_complete_cb = NULL;
  34  #endif /* CONFIG_MESH */
  35
  36         hostapd_clean_rrm(hapd);
  37 @@ -2156,6 +2158,13 @@ dfs_offload:
  38         if (hapd->setup_complete_cb)
  39                 hapd->setup_complete_cb(hapd->setup_complete_cb_ctx);
  40
  41 +#ifdef CONFIG_MESH
  42 +       if (delay_apply_cfg && !iface->mconf) {
  43 +               wpa_printf(MSG_ERROR, "Error while completing mesh init");
  44 +               goto fail;
  45 +       }
  46 +#endif /* CONFIG_MESH */
  47 +
  48         wpa_printf(MSG_DEBUG, "%s: Setup of interface done.",
  49                    iface->bss[0]->conf->iface);
  50         if (iface->interfaces && iface->interfaces->terminate_on_error > 0)
  51 @@ -2299,7 +2308,7 @@ int hostapd_setup_interface(struct hosta
  52         ret = setup_interface(iface);
  53         if (ret) {
  54                 wpa_printf(MSG_ERROR, "%s: Unable to setup interface.",
  55 -                          iface->bss[0]->conf->iface);
  56 +                          iface->conf ? iface->conf->bss[0]->iface : "N/A");
  57                 return -1;
  58         }
  59
  60 --- a/wpa_supplicant/mesh.c
  61 +++ b/wpa_supplicant/mesh.c
  62 @@ -194,8 +194,9 @@ static int wpas_mesh_init_rsn(struct wpa
  63  }
  64
  65
  66 -static int wpas_mesh_complete(struct wpa_supplicant *wpa_s)
  67 +static void wpas_mesh_complete_cb(void *ctx)
  68  {
  69 +       struct wpa_supplicant *wpa_s = ctx;
  70         struct hostapd_iface *ifmsh = wpa_s->ifmsh;
  71         struct wpa_driver_mesh_join_params *params = wpa_s->mesh_params;
  72         struct wpa_ssid *ssid = wpa_s->current_ssid;
  73 @@ -204,7 +205,7 @@ static int wpas_mesh_complete(struct wpa
  74         if (!params || !ssid || !ifmsh) {
  75                 wpa_printf(MSG_ERROR, "mesh: %s called without active mesh",
  76                            __func__);
  77 -               return -1;
  78 +               return;
  79         }
  80
  81         if (ifmsh->mconf->security != MESH_CONF_SEC_NONE &&
  82 @@ -213,7 +214,7 @@ static int wpas_mesh_complete(struct wpa
  83                            "mesh: RSN initialization failed - deinit mesh");
  84                 wpa_supplicant_mesh_deinit(wpa_s);
  85                 wpa_drv_leave_mesh(wpa_s);
  86 -               return -1;
  87 +               return;
  88         }
  89
  90         if (ssid->key_mgmt & WPA_KEY_MGMT_SAE) {
  91 @@ -239,8 +240,6 @@ static int wpas_mesh_complete(struct wpa
  92
  93         if (!ret)
  94                 wpa_supplicant_set_state(wpa_s, WPA_COMPLETED);
  95 -
  96 -       return ret;
  97  }
  98
  99
 100 @@ -267,6 +266,7 @@ static int wpa_supplicant_mesh_init(stru
 101         if (!ifmsh)
 102                 return -ENOMEM;
 103
 104 +       ifmsh->owner = wpa_s;
 105         ifmsh->drv_flags = wpa_s->drv_flags;
 106         ifmsh->drv_flags2 = wpa_s->drv_flags2;
 107         ifmsh->num_bss = 1;
 108 @@ -285,6 +285,8 @@ static int wpa_supplicant_mesh_init(stru
 109         bss->drv_priv = wpa_s->drv_priv;
 110         bss->iface = ifmsh;
 111         bss->mesh_sta_free_cb = mesh_mpm_free_sta;
 112 +       bss->setup_complete_cb = wpas_mesh_complete_cb;
 113 +       bss->setup_complete_cb_ctx = wpa_s;
 114         frequency = ssid->frequency;
 115         if (frequency != freq->freq &&
 116             frequency == freq->freq + freq->sec_channel_offset * 20) {
 117 @@ -526,7 +528,6 @@ int wpa_supplicant_join_mesh(struct wpa_
 118                 goto out;
 119         }
 120
 121 -       ret = wpas_mesh_complete(wpa_s);
 122  out:
 123         return ret;
 124  }