[openwrt/staging/linusw.git] /

From a658f8a9151c5852d590c998c2b806581509afbb Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Tue, 23 Jun 2020 15:14:05 +0100
Subject: [PATCH] media: bcm2835-unicam: Fixup review comments from
 Hans.

Updates the driver based on the upstream review comments from
Hans Verkuil at https://patchwork.linuxtv.org/patch/63531/

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 drivers/media/platform/bcm2835/Kconfig        | 12 ++--
 .../media/platform/bcm2835/bcm2835-unicam.c   | 70 ++++++++-----------
 2 files changed, 39 insertions(+), 43 deletions(-)

--- a/drivers/media/platform/bcm2835/Kconfig
+++ b/drivers/media/platform/bcm2835/Kconfig
@@ -1,7 +1,7 @@
 # Broadcom VideoCore4 V4L2 camera support
 
 config VIDEO_BCM2835_UNICAM
-       tristate "Broadcom BCM2835 Unicam video capture driver"
+       tristate "Broadcom BCM283x/BCM271x Unicam video capture driver"
        depends on VIDEO_V4L2
        depends on ARCH_BCM2835 || COMPILE_TEST
        select VIDEO_V4L2_SUBDEV_API
@@ -9,9 +9,13 @@ config VIDEO_BCM2835_UNICAM
        select VIDEOBUF2_DMA_CONTIG
        select V4L2_FWNODE
        help
-         Say Y here to enable support for the BCM2835 CSI-2 receiver. This is a
-         V4L2 driver that controls the CSI-2 receiver directly, independently
-         from the VC4 firmware.
+         Say Y here to enable support for the BCM283x/BCM271x CSI-2 receiver.
+         This is a V4L2 driver that controls the CSI-2 receiver directly,
+         independently from the VC4 firmware.
+         This driver is mutually exclusive with the use of bcm2835-camera. The
+         firmware will disable all access to the peripheral from within the
+         firmware if it finds a DT node using it, and bcm2835-camera will
+         therefore fail to probe.
 
          To compile this driver as a module, choose M here. The module will be
          called bcm2835-unicam.
--- a/drivers/media/platform/bcm2835/bcm2835-unicam.c
+++ b/drivers/media/platform/bcm2835/bcm2835-unicam.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * BCM2835 Unicam Capture Driver
+ * BCM283x / BCM271x Unicam Capture Driver
  *
  * Copyright (C) 2017-2020 - Raspberry Pi (Trading) Ltd.
  *
@@ -571,9 +571,8 @@ static const struct unicam_fmt *find_for
        return NULL;
 }
 
-static inline unsigned int bytes_per_line(u32 width,
-                                         const struct unicam_fmt *fmt,
-                                         u32 v4l2_fourcc)
+static unsigned int bytes_per_line(u32 width, const struct unicam_fmt *fmt,
+                                  u32 v4l2_fourcc)
 {
        if (v4l2_fourcc == fmt->repacked_fourcc)
                /* Repacking always goes to 16bpp */
@@ -718,7 +717,7 @@ static void unicam_wr_dma_addr(struct un
        }
 }
 
-static inline unsigned int unicam_get_lines_done(struct unicam_device *dev)
+static unsigned int unicam_get_lines_done(struct unicam_device *dev)
 {
        dma_addr_t start_addr, cur_addr;
        unsigned int stride = dev->node[IMAGE_PAD].v_fmt.fmt.pix.bytesperline;
@@ -732,7 +731,7 @@ static inline unsigned int unicam_get_li
        return (unsigned int)(cur_addr - start_addr) / stride;
 }
 
-static inline void unicam_schedule_next_buffer(struct unicam_node *node)
+static void unicam_schedule_next_buffer(struct unicam_node *node)
 {
        struct unicam_device *dev = node->dev;
        struct unicam_buffer *buf;
@@ -751,7 +750,7 @@ static inline void unicam_schedule_next_
        unicam_wr_dma_addr(dev, addr, size, node->pad_id);
 }
 
-static inline void unicam_schedule_dummy_buffer(struct unicam_node *node)
+static void unicam_schedule_dummy_buffer(struct unicam_node *node)
 {
        struct unicam_device *dev = node->dev;
 
@@ -763,8 +762,8 @@ static inline void unicam_schedule_dummy
        node->next_frm = NULL;
 }
 
-static inline void unicam_process_buffer_complete(struct unicam_node *node,
-                                                 unsigned int sequence)
+static void unicam_process_buffer_complete(struct unicam_node *node,
+                                          unsigned int sequence)
 {
        node->cur_frm->vb.field = node->m_fmt.field;
        node->cur_frm->vb.sequence = sequence;
@@ -772,16 +771,6 @@ static inline void unicam_process_buffer
        vb2_buffer_done(&node->cur_frm->vb.vb2_buf, VB2_BUF_STATE_DONE);
 }
 
-static bool unicam_all_nodes_streaming(struct unicam_device *dev)
-{
-       bool ret;
-
-       ret = dev->node[IMAGE_PAD].open && dev->node[IMAGE_PAD].streaming;
-       ret &= !dev->node[METADATA_PAD].open ||
-              dev->node[METADATA_PAD].streaming;
-       return ret;
-}
-
 static void unicam_queue_event_sof(struct unicam_device *unicam)
 {
        struct v4l2_event event = {
@@ -904,8 +893,8 @@ static int unicam_querycap(struct file *
        struct unicam_node *node = video_drvdata(file);
        struct unicam_device *dev = node->dev;
 
-       strlcpy(cap->driver, UNICAM_MODULE_NAME, sizeof(cap->driver));
-       strlcpy(cap->card, UNICAM_MODULE_NAME, sizeof(cap->card));
+       strscpy(cap->driver, UNICAM_MODULE_NAME, sizeof(cap->driver));
+       strscpy(cap->card, UNICAM_MODULE_NAME, sizeof(cap->card));
 
        snprintf(cap->bus_info, sizeof(cap->bus_info),
                 "platform:%s", dev_name(&dev->pdev->dev));
@@ -998,8 +987,8 @@ static int unicam_g_fmt_vid_cap(struct f
        return 0;
 }
 
-static
-const struct unicam_fmt *get_first_supported_format(struct unicam_device *dev)
+static const struct unicam_fmt *
+get_first_supported_format(struct unicam_device *dev)
 {
        struct v4l2_subdev_mbus_code_enum mbus_code;
        const struct unicam_fmt *fmt = NULL;
@@ -1589,7 +1578,8 @@ static void unicam_disable(struct unicam
        clk_write(dev, 0);
 }
 
-static void unicam_return_buffers(struct unicam_node *node)
+static void unicam_return_buffers(struct unicam_node *node,
+                                 enum vb2_buffer_state state)
 {
        struct unicam_buffer *buf, *tmp;
        unsigned long flags;
@@ -1597,15 +1587,15 @@ static void unicam_return_buffers(struct
        spin_lock_irqsave(&node->dma_queue_lock, flags);
        list_for_each_entry_safe(buf, tmp, &node->dma_queue, list) {
                list_del(&buf->list);
-               vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+               vb2_buffer_done(&buf->vb.vb2_buf, state);
        }
 
        if (node->cur_frm)
                vb2_buffer_done(&node->cur_frm->vb.vb2_buf,
-                               VB2_BUF_STATE_ERROR);
+                               state);
        if (node->next_frm && node->cur_frm != node->next_frm)
                vb2_buffer_done(&node->next_frm->vb.vb2_buf,
-                               VB2_BUF_STATE_ERROR);
+                               state);
 
        node->cur_frm = NULL;
        node->next_frm = NULL;
@@ -1622,7 +1612,13 @@ static int unicam_start_streaming(struct
        int ret;
 
        node->streaming = true;
-       if (!unicam_all_nodes_streaming(dev)) {
+       if (!(dev->node[IMAGE_PAD].open && dev->node[IMAGE_PAD].streaming &&
+             (!dev->node[METADATA_PAD].open ||
+              dev->node[METADATA_PAD].streaming))) {
+               /*
+                * Metadata pad must be enabled before image pad if it is
+                * wanted.
+                */
                unicam_dbg(3, dev, "Not all nodes are streaming yet.");
                return 0;
        }
@@ -1726,7 +1722,7 @@ err_vpu_clock:
 err_pm_put:
        unicam_runtime_put(dev);
 err_streaming:
-       unicam_return_buffers(node);
+       unicam_return_buffers(node, VB2_BUF_STATE_QUEUED);
        node->streaming = false;
 
        return ret;
@@ -1771,7 +1767,7 @@ static void unicam_stop_streaming(struct
        }
 
        /* Clear all queued buffers for the node */
-       unicam_return_buffers(node);
+       unicam_return_buffers(node, VB2_BUF_STATE_ERROR);
 }
 
 static int unicam_enum_input(struct file *file, void *priv,
@@ -1789,14 +1785,13 @@ static int unicam_enum_input(struct file
                inp->std = 0;
        } else if (v4l2_subdev_has_op(dev->sensor, video, s_std)) {
                inp->capabilities = V4L2_IN_CAP_STD;
-               if (v4l2_subdev_call(dev->sensor, video, g_tvnorms, &inp->std)
-                                       < 0)
+               if (v4l2_subdev_call(dev->sensor, video, g_tvnorms, &inp->std) < 0)
                        inp->std = V4L2_STD_ALL;
        } else {
                inp->capabilities = 0;
                inp->std = 0;
        }
-       sprintf(inp->name, "Camera 0");
+       snprintf(inp->name, sizeof(inp->name), "Camera 0");
        return 0;
 }
 
@@ -2025,6 +2020,9 @@ static int unicam_s_dv_timings(struct fi
        ret = v4l2_subdev_call(dev->sensor, video, g_dv_timings,
                               &current_timings);
 
+       if (ret < 0)
+               return ret;
+
        if (v4l2_match_dv_timings(timings, &current_timings, 0, false))
                return 0;
 
@@ -2455,12 +2453,6 @@ static int register_node(struct unicam_d
                unicam_err(unicam, "Unable to allocate dummy buffer.\n");
                return -ENOMEM;
        }
-
-       if (pad_id == METADATA_PAD) {
-               v4l2_disable_ioctl(vdev, VIDIOC_DQEVENT);
-               v4l2_disable_ioctl(vdev, VIDIOC_SUBSCRIBE_EVENT);
-               v4l2_disable_ioctl(vdev, VIDIOC_UNSUBSCRIBE_EVENT);
-       }
        if (pad_id == METADATA_PAD ||
            !v4l2_subdev_has_op(unicam->sensor, video, s_std)) {
                v4l2_disable_ioctl(&node->video_dev, VIDIOC_S_STD);