git.openwrt.org Git - openwrt/staging/thess.git/blob

   1 From 1ca8311949aec5c9447645731ef1c6bc5bd71350 Mon Sep 17 00:00:00 2001
   2 From: Ansuel Smith <ansuelsmth@gmail.com>
   3 Date: Sun, 10 Oct 2021 00:46:16 +0200
   4 Subject: net: phy: at803x: add DAC amplitude fix for 8327 phy
   5
   6 QCA8327 internal phy require DAC amplitude adjustement set to +6% with
   7 100m speed. Also add additional define to report a change of the same
   8 reg in QCA8337. (different scope it does set 1000m voltage)
   9 Add link_change_notify function to set the proper amplitude adjustement
  10 on PHY_RUNNING state and disable on any other state.
  11
  12 Fixes: b4df02b562f4 ("net: phy: at803x: add support for qca 8327 A variant internal phy")
  13 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
  14 Signed-off-by: David S. Miller <davem@davemloft.net>
  15 ---
  16  drivers/net/phy/at803x.c | 33 +++++++++++++++++++++++++++++++++
  17  1 file changed, 33 insertions(+)
  18
  19 --- a/drivers/net/phy/at803x.c
  20 +++ b/drivers/net/phy/at803x.c
  21 @@ -87,6 +87,8 @@
  22  #define AT803X_PSSR_MR_AN_COMPLETE             0x0200
  23
  24  #define AT803X_DEBUG_REG_0                     0x00
  25 +#define QCA8327_DEBUG_MANU_CTRL_EN             BIT(2)
  26 +#define QCA8337_DEBUG_MANU_CTRL_EN             GENMASK(3, 2)
  27  #define AT803X_DEBUG_RX_CLK_DLY_EN             BIT(15)
  28
  29  #define AT803X_DEBUG_REG_5                     0x05
  30 @@ -1306,9 +1308,37 @@ static int qca83xx_config_init(struct ph
  31                 break;
  32         }
  33
  34 +       /* QCA8327 require DAC amplitude adjustment for 100m set to +6%.
  35 +        * Disable on init and enable only with 100m speed following
  36 +        * qca original source code.
  37 +        */
  38 +       if (phydev->drv->phy_id == QCA8327_A_PHY_ID ||
  39 +           phydev->drv->phy_id == QCA8327_B_PHY_ID)
  40 +               at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
  41 +                                     QCA8327_DEBUG_MANU_CTRL_EN, 0);
  42 +
  43         return 0;
  44  }
  45
  46 +static void qca83xx_link_change_notify(struct phy_device *phydev)
  47 +{
  48 +       /* QCA8337 doesn't require DAC Amplitude adjustement */
  49 +       if (phydev->drv->phy_id == QCA8337_PHY_ID)
  50 +               return;
  51 +
  52 +       /* Set DAC Amplitude adjustment to +6% for 100m on link running */
  53 +       if (phydev->state == PHY_RUNNING) {
  54 +               if (phydev->speed == SPEED_100)
  55 +                       at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
  56 +                                             QCA8327_DEBUG_MANU_CTRL_EN,
  57 +                                             QCA8327_DEBUG_MANU_CTRL_EN);
  58 +       } else {
  59 +               /* Reset DAC Amplitude adjustment */
  60 +               at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
  61 +                                     QCA8327_DEBUG_MANU_CTRL_EN, 0);
  62 +       }
  63 +}
  64 +
  65  static int qca83xx_resume(struct phy_device *phydev)
  66  {
  67         int ret, val;
  68 @@ -1461,6 +1491,7 @@ static struct phy_driver at803x_driver[]
  69         .phy_id_mask            = QCA8K_PHY_ID_MASK,
  70         .name                   = "Qualcomm Atheros 8337 internal PHY",
  71         /* PHY_GBIT_FEATURES */
  72 +       .link_change_notify     = qca83xx_link_change_notify,
  73         .probe                  = at803x_probe,
  74         .flags                  = PHY_IS_INTERNAL,
  75         .config_init            = qca83xx_config_init,
  76 @@ -1476,6 +1507,7 @@ static struct phy_driver at803x_driver[]
  77         .phy_id_mask            = QCA8K_PHY_ID_MASK,
  78         .name                   = "Qualcomm Atheros 8327-A internal PHY",
  79         /* PHY_GBIT_FEATURES */
  80 +       .link_change_notify     = qca83xx_link_change_notify,
  81         .probe                  = at803x_probe,
  82         .flags                  = PHY_IS_INTERNAL,
  83         .config_init            = qca83xx_config_init,
  84 @@ -1491,6 +1523,7 @@ static struct phy_driver at803x_driver[]
  85         .phy_id_mask            = QCA8K_PHY_ID_MASK,
  86         .name                   = "Qualcomm Atheros 8327-B internal PHY",
  87         /* PHY_GBIT_FEATURES */
  88 +       .link_change_notify     = qca83xx_link_change_notify,
  89         .probe                  = at803x_probe,
  90         .flags                  = PHY_IS_INTERNAL,
  91         .config_init            = qca83xx_config_init,