78d3d51a17ad64bfe0d5e21138e868265f43c8e5
[openwrt/staging/jow.git] /
1 From 387b3bbac5ea6a0a105d685237f033ffe0f184f1 Mon Sep 17 00:00:00 2001
2 From: Tianling Shen <cnsztl@gmail.com>
3 Date: Sat, 25 Mar 2023 15:40:22 +0800
4 Subject: [PATCH] arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS
5
6 The OrangePi R1 Plus LTS is a minor variant of OrangePi R1 Plus with
7 the on-board NIC chip changed from rtl8211e to yt8531c, and otherwise
8 identical to OrangePi R1 Plus.
9
10 Signed-off-by: Tianling Shen <cnsztl@gmail.com>
11 Link: https://lore.kernel.org/r/20230325074022.9818-5-cnsztl@gmail.com
12 Signed-off-by: Heiko Stuebner <heiko@sntech.de>
13 ---
14 arch/arm64/boot/dts/rockchip/Makefile | 1 +
15 .../rockchip/rk3328-orangepi-r1-plus-lts.dts | 40 +++++++++++++++++++
16 2 files changed, 41 insertions(+)
17 create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
18
19 --- a/arch/arm64/boot/dts/rockchip/Makefile
20 +++ b/arch/arm64/boot/dts/rockchip/Makefile
21 @@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-ev
22 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb
23 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
24 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb
25 +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus-lts.dtb
26 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
27 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb
28 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
29 --- /dev/null
30 +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
31 @@ -0,0 +1,40 @@
32 +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
33 +/*
34 + * Copyright (c) 2016 Xunlong Software. Co., Ltd.
35 + * (http://www.orangepi.org)
36 + *
37 + * Copyright (c) 2021-2023 Tianling Shen <cnsztl@gmail.com>
38 + */
39 +
40 +/dts-v1/;
41 +#include "rk3328-orangepi-r1-plus.dts"
42 +
43 +/ {
44 + model = "Xunlong Orange Pi R1 Plus LTS";
45 + compatible = "xunlong,orangepi-r1-plus-lts", "rockchip,rk3328";
46 +};
47 +
48 +&gmac2io {
49 + phy-handle = <&yt8531c>;
50 + tx_delay = <0x19>;
51 + rx_delay = <0x05>;
52 +
53 + mdio {
54 + /delete-node/ ethernet-phy@1;
55 +
56 + yt8531c: ethernet-phy@0 {
57 + compatible = "ethernet-phy-ieee802.3-c22";
58 + reg = <0>;
59 +
60 + motorcomm,clk-out-frequency-hz = <125000000>;
61 + motorcomm,keep-pll-enabled;
62 + motorcomm,auto-sleep-disabled;
63 +
64 + pinctrl-0 = <&eth_phy_reset_pin>;
65 + pinctrl-names = "default";
66 + reset-assert-us = <15000>;
67 + reset-deassert-us = <50000>;
68 + reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
69 + };
70 + };
71 +};