projects / openwrt / staging / chunkeey.git / blob
? search:


8971c6af615481466948e69b374731952d09afad
[openwrt/staging/chunkeey.git] /
1 From cda32ee78d8b448bcbfc8e3d55dc04d809657ce2 Mon Sep 17 00:00:00 2001
2 From: Ran Wang <ran.wang_1@nxp.com>
3 Date: Wed, 20 Nov 2019 14:09:23 +0800
4 Subject: [PATCH] LF-387-4 usb: dwc3: Add cache type configuration support
5
6 This feature is telling how to configure cache type on 4 different
7 transfer types: Data Read, Desc Read, Data Write and Desc write. For each
8 treasfer type, controller has a 4-bit register field to enable different
9 cache type. Quoted from DWC3 data book Table 6-5 Cache Type Bit Assignments:
10 ----------------------------------------------------------------
11 MBUS_TYPE| bit[3] |bit[2] |bit[1] |bit[0]
12 ----------------------------------------------------------------
13 AHB |Cacheable |Bufferable |Privilegge |Data
14 AXI3 |Write Allocate|Read Allocate|Cacheable |Bufferable
15 AXI4 |Allocate Other|Allocate |Modifiable |Bufferable
16 AXI4 |Other Allocate|Allocate |Modifiable |Bufferable
17 Native |Same as AXI |Same as AXI |Same as AXI|Same as AXI
18 ----------------------------------------------------------------
19 Note: The AHB, AXI3, AXI4, and PCIe busses use different names for certain
20 signals, which have the same meaning:
21 Bufferable = Posted
22 Cacheable = Modifiable = Snoop (negation of No Snoop)
23
24 In most cases, driver support is not required unless the default values of
25 registers are not correct *and* DWC3 node has enabled dma-coherent. So far we
26 have observed USB device detect failure on some Layerscape platforms if this
27 programming was not applied.
28
29 Related struct:
30 struct dwc3_cache_type {
31 u8 transfer_type_datard;
32 u8 transfer_type_descrd;
33 u8 transfer_type_datawr;
34 u8 transfer_type_descwr;
35 };
36
37 Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
38 Reviewed-by: Jun Li <jun.li@nxp.com>
39 ---
40 drivers/usb/dwc3/core.c | 67 ++++++++++++++++++++++++++++++++++++++++++++-----
41 drivers/usb/dwc3/core.h | 15 +++++++++++
42 2 files changed, 76 insertions(+), 6 deletions(-)
43
44 --- a/drivers/usb/dwc3/core.c
45 +++ b/drivers/usb/dwc3/core.c
46 @@ -913,6 +913,53 @@ static void dwc3_set_power_down_clk_scal
47 dwc3_writel(dwc->regs, DWC3_GCTL, reg);
48 }
49
50 +#ifdef CONFIG_OF
51 +struct dwc3_cache_type {
52 + u8 transfer_type_datard;
53 + u8 transfer_type_descrd;
54 + u8 transfer_type_datawr;
55 + u8 transfer_type_descwr;
56 +};
57 +
58 +static const struct dwc3_cache_type ls1088a_dwc3_cache_type = {
59 + .transfer_type_datard = 2,
60 + .transfer_type_descrd = 2,
61 + .transfer_type_datawr = 2,
62 + .transfer_type_descwr = 2,
63 +};
64 +
65 +/**
66 + * dwc3_set_cache_type - Configure cache type registers
67 + * @dwc: Pointer to our controller context structure
68 + */
69 +static void dwc3_set_cache_type(struct dwc3 *dwc)
70 +{
71 + u32 tmp, reg;
72 + const struct dwc3_cache_type *cache_type =
73 + device_get_match_data(dwc->dev);
74 +
75 + if (cache_type) {
76 + reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0);
77 + tmp = reg;
78 +
79 + reg &= ~DWC3_GSBUSCFG0_DATARD(~0);
80 + reg |= DWC3_GSBUSCFG0_DATARD(cache_type->transfer_type_datard);
81 +
82 + reg &= ~DWC3_GSBUSCFG0_DESCRD(~0);
83 + reg |= DWC3_GSBUSCFG0_DESCRD(cache_type->transfer_type_descrd);
84 +
85 + reg &= ~DWC3_GSBUSCFG0_DATAWR(~0);
86 + reg |= DWC3_GSBUSCFG0_DATAWR(cache_type->transfer_type_datawr);
87 +
88 + reg &= ~DWC3_GSBUSCFG0_DESCWR(~0);
89 + reg |= DWC3_GSBUSCFG0_DESCWR(cache_type->transfer_type_descwr);
90 +
91 + if (tmp != reg)
92 + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg);
93 + }
94 +}
95 +#endif
96 +
97 /**
98 * dwc3_core_init - Low-level initialization of DWC3 Core
99 * @dwc: Pointer to our controller context structure
100 @@ -973,6 +1020,10 @@ static int dwc3_core_init(struct dwc3 *d
101
102 dwc3_set_incr_burst_type(dwc);
103
104 +#ifdef CONFIG_OF
105 + dwc3_set_cache_type(dwc);
106 +#endif
107 +
108 usb_phy_set_suspend(dwc->usb2_phy, 0);
109 usb_phy_set_suspend(dwc->usb3_phy, 0);
110 ret = phy_power_on(dwc->usb2_generic_phy);
111 @@ -1895,12 +1946,16 @@ static const struct dev_pm_ops dwc3_dev_
112
113 #ifdef CONFIG_OF
114 static const struct of_device_id of_dwc3_match[] = {
115 - {
116 - .compatible = "snps,dwc3"
117 - },
118 - {
119 - .compatible = "synopsys,dwc3"
120 - },
121 + { .compatible = "fsl,ls1012a-dwc3", .data = &ls1088a_dwc3_cache_type, },
122 + { .compatible = "fsl,ls1021a-dwc3", .data = &ls1088a_dwc3_cache_type, },
123 + { .compatible = "fsl,ls1028a-dwc3", .data = &ls1088a_dwc3_cache_type, },
124 + { .compatible = "fsl,ls1043a-dwc3", .data = &ls1088a_dwc3_cache_type, },
125 + { .compatible = "fsl,ls1046a-dwc3", .data = &ls1088a_dwc3_cache_type, },
126 + { .compatible = "fsl,ls1088a-dwc3", .data = &ls1088a_dwc3_cache_type, },
127 + { .compatible = "fsl,ls2088a-dwc3", .data = &ls1088a_dwc3_cache_type, },
128 + { .compatible = "fsl,lx2160a-dwc3", .data = &ls1088a_dwc3_cache_type, },
129 + { .compatible = "snps,dwc3" },
130 + { .compatible = "synopsys,dwc3" },
131 { },
132 };
133 MODULE_DEVICE_TABLE(of, of_dwc3_match);
134 --- a/drivers/usb/dwc3/core.h
135 +++ b/drivers/usb/dwc3/core.h
136 @@ -166,6 +166,21 @@
137 /* Bit fields */
138
139 /* Global SoC Bus Configuration INCRx Register 0 */
140 +#ifdef CONFIG_OF
141 +#define DWC3_GSBUSCFG0_DATARD_SHIFT 28
142 +#define DWC3_GSBUSCFG0_DATARD(n) (((n) & 0xf) \
143 + << DWC3_GSBUSCFG0_DATARD_SHIFT)
144 +#define DWC3_GSBUSCFG0_DESCRD_SHIFT 24
145 +#define DWC3_GSBUSCFG0_DESCRD(n) (((n) & 0xf) \
146 + << DWC3_GSBUSCFG0_DESCRD_SHIFT)
147 +#define DWC3_GSBUSCFG0_DATAWR_SHIFT 20
148 +#define DWC3_GSBUSCFG0_DATAWR(n) (((n) & 0xf) \
149 + << DWC3_GSBUSCFG0_DATAWR_SHIFT)
150 +#define DWC3_GSBUSCFG0_DESCWR_SHIFT 16
151 +#define DWC3_GSBUSCFG0_DESCWR(n) (((n) & 0xf) \
152 + << DWC3_GSBUSCFG0_DESCWR_SHIFT)
153 +#endif
154 +
155 #define DWC3_GSBUSCFG0_INCR256BRSTENA (1 << 7) /* INCR256 burst */
156 #define DWC3_GSBUSCFG0_INCR128BRSTENA (1 << 6) /* INCR128 burst */
157 #define DWC3_GSBUSCFG0_INCR64BRSTENA (1 << 5) /* INCR64 burst */
Staging tree of Christian Lamparter