8bad76edcaaf8da5707c4f0d89978992434ef434
[openwrt/staging/mans0n.git] /
1 From be7e1e5b0f67c58ec4be0a54db23b6a4fa6e2116 Mon Sep 17 00:00:00 2001
2 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
3 Date: Fri, 7 Jul 2023 13:40:01 +0200
4 Subject: [PATCH] ARM: dts: BCM53573: Drop nonexistent "default-off" LED
5 trigger
6 MIME-Version: 1.0
7 Content-Type: text/plain; charset=UTF-8
8 Content-Transfer-Encoding: 8bit
9
10 There is no such trigger documented or implemented in Linux. It was a
11 copy & paste mistake.
12
13 This fixes:
14 arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: leds: led-wlan:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
15 'default-off' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'disk-read', 'disk-write', 'timer', 'pattern', 'audio-micmute', 'audio-mute', 'bluetooth-power', 'flash', 'kbd-capslock', 'mtd', 'nand-disk', 'none', 'torch', 'usb-gadget', 'usb-host', 'usbport']
16 'default-off' does not match '^cpu[0-9]*$'
17 'default-off' does not match '^hci[0-9]+-power$'
18 'default-off' does not match '^mmc[0-9]+$'
19 'default-off' does not match '^phy[0-9]+tx$'
20 From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml
21
22 Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
23 Link: https://lore.kernel.org/r/20230707114004.2740-1-zajec5@gmail.com
24 Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
25 ---
26 arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts | 1 -
27 arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts | 2 --
28 2 files changed, 3 deletions(-)
29
30 --- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
31 +++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
32 @@ -26,7 +26,6 @@
33 led-wlan {
34 label = "bcm53xx:blue:wlan";
35 gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
36 - linux,default-trigger = "default-off";
37 };
38
39 led-system {
40 --- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
41 +++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
42 @@ -26,7 +26,6 @@
43 led-5ghz {
44 label = "bcm53xx:blue:5ghz";
45 gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
46 - linux,default-trigger = "default-off";
47 };
48
49 led-system {
50 @@ -42,7 +41,6 @@
51 led-2ghz {
52 label = "bcm53xx:blue:2ghz";
53 gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
54 - linux,default-trigger = "default-off";
55 };
56 };
57