git.openwrt.org Git - openwrt/staging/thess.git/blob

   1 From c92df3d93ad09f219e0728b39d40dc0a69d0760f Mon Sep 17 00:00:00 2001
   2 From: Vijayakumar Durai <vijayakumar.durai1@vivint.com>
   3 Date: Tue Feb 26 19:29:30 2019 +0530
   4 Subject: [PATCH] rt2x00: do not increment sequence number while
   5  re-transmitting
   6
   7 Currently STA+AP re-transmitting the management frames with
   8 incremented sequence number if hardware is assigning the sequence.
   9
  10 Fix is to assign the sequence number for Beacon by hardware
  11 and for other Management frames software will assign the
  12 sequence number
  13
  14 Signed-off-by: Vijayakumar Durai <vijayakumar.durai1@vivint.com>
  15 ---
  16  .../net/wireless/ralink/rt2x00/rt2x00queue.c  | 26 +++++++++----------
  17  1 file changed, 12 insertions(+), 14 deletions(-)
  18
  19 --- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
  20 +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
  21 @@ -207,22 +207,20 @@ static void rt2x00queue_create_tx_descri
  22                  */
  23                 if (test_bit(CONFIG_QOS_DISABLED, &rt2x00dev->flags))
  24                         __clear_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
  25 -               else
  26 -                       /* H/W will generate sequence number */
  27 -                       return;
  28 +               else {
  29 +                       /*
  30 +                        * rt2800 has a beacon problem(beacon is sent with same sequence
  31 +                        * number more than once)with software generated sequence number.
  32 +                        * So for beacons,hardware will generate sequence number and for
  33 +                        * other Management frames software will generate sequence number.
  34 +                        */
  35 +                       if (ieee80211_is_beacon(hdr->frame_control))
  36 +                               return;
  37 +                       else
  38 +                               __clear_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
  39 +               }
  40         }
  41
  42 -       /*
  43 -        * The hardware is not able to insert a sequence number. Assign a
  44 -        * software generated one here.
  45 -        *
  46 -        * This is wrong because beacons are not getting sequence
  47 -        * numbers assigned properly.
  48 -        *
  49 -        * A secondary problem exists for drivers that cannot toggle
  50 -        * sequence counting per-frame, since those will override the
  51 -        * sequence counter given by mac80211.
  52 -        */
  53         if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags))
  54                 seqno = atomic_add_return(0x10, &intf->seqno);
  55         else