git.openwrt.org Git - openwrt/staging/linusw.git/blob

   1 From 5e67752c725fa06d0e2455dac19fbef93e313eb7 Mon Sep 17 00:00:00 2001
   2 From: Dave Stevenson <dave.stevenson@raspberrypi.com>
   3 Date: Thu, 25 Jun 2020 16:52:14 +0100
   4 Subject: [PATCH] media: dt-bindings: media: i2c: Add mono version to
   5  IMX290 bindings
   6
   7 The IMX290 module is available as either monochrome or colour and
   8 the variant is not detectable at runtime.
   9
  10 Add a new compatible string for the monochrome version.
  11
  12 Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
  13 ---
  14  Documentation/devicetree/bindings/media/i2c/imx290.txt | 7 ++++---
  15  1 file changed, 4 insertions(+), 3 deletions(-)
  16
  17 --- a/Documentation/devicetree/bindings/media/i2c/imx290.txt
  18 +++ b/Documentation/devicetree/bindings/media/i2c/imx290.txt
  19 @@ -1,13 +1,14 @@
  20  * Sony IMX290 1/2.8-Inch CMOS Image Sensor
  21
  22  The Sony IMX290 is a 1/2.8-Inch CMOS Solid-state image sensor with
  23 -Square Pixel for Color Cameras. It is programmable through I2C and 4-wire
  24 -interfaces. The sensor output is available via CMOS logic parallel SDR output,
  25 +Square Pixel for Color or Monochrome Cameras. It is programmable through I2C
  26 +and 4-wire interfaces.
  27 +The sensor output is available via CMOS logic parallel SDR output,
  28  Low voltage LVDS DDR output and CSI-2 serial data output. The CSI-2 bus is the
  29  default. No bindings have been defined for the other busses.
  30
  31  Required Properties:
  32 -- compatible: Should be "sony,imx290"
  33 +- compatible: Should be "sony,imx290", or "sony,imx290-mono"
  34  - reg: I2C bus address of the device
  35  - clocks: Reference to the xclk clock.
  36  - clock-names: Should be "xclk".