git.openwrt.org Git - openwrt/staging/stintel.git/blob

   1 From 9ec092d2feb69045dd289845024301fb91c064ee Mon Sep 17 00:00:00 2001
   2 From: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
   3 Date: Tue, 14 Jun 2022 13:22:27 +0200
   4 Subject: [PATCH 1/2] net: ethernet: stmmac: add missing sgmii configure for
   5  ipq806x
   6
   7 The different gmacid require different configuration based on the soc
   8 and on the gmac id. Add these missing configuration taken from the
   9 original driver.
  10
  11 Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
  12 Link: https://lore.kernel.org/r/20220614112228.1998-1-ansuelsmth@gmail.com
  13 Signed-off-by: Paolo Abeni <pabeni@redhat.com>
  14 ---
  15  drivers/net/ethernet/stmicro/stmmac/Kconfig   |  1 +
  16  .../ethernet/stmicro/stmmac/dwmac-ipq806x.c   | 93 +++++++++++++++----
  17  2 files changed, 78 insertions(+), 16 deletions(-)
  18
  19 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
  20 +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
  21 @@ -83,6 +83,7 @@ config DWMAC_IPQ806X
  22         default ARCH_QCOM
  23         depends on OF && (ARCH_QCOM || COMPILE_TEST)
  24         select MFD_SYSCON
  25 +       select QCOM_SOCINFO
  26         help
  27           Support for QCA IPQ806X DWMAC Ethernet.
  28
  29 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
  30 +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
  31 @@ -27,6 +27,8 @@
  32  #include <linux/stmmac.h>
  33  #include <linux/of_mdio.h>
  34  #include <linux/module.h>
  35 +#include <linux/sys_soc.h>
  36 +#include <linux/bitfield.h>
  37
  38  #include "stmmac_platform.h"
  39
  40 @@ -75,11 +77,20 @@
  41  #define QSGMII_PHY_RX_SIGNAL_DETECT_EN         BIT(2)
  42  #define QSGMII_PHY_TX_DRIVER_EN                        BIT(3)
  43  #define QSGMII_PHY_QSGMII_EN                   BIT(7)
  44 -#define QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET      12
  45 -#define QSGMII_PHY_RX_DC_BIAS_OFFSET           18
  46 -#define QSGMII_PHY_RX_INPUT_EQU_OFFSET         20
  47 -#define QSGMII_PHY_CDR_PI_SLEW_OFFSET          22
  48 -#define QSGMII_PHY_TX_DRV_AMP_OFFSET           28
  49 +#define QSGMII_PHY_DEEMPHASIS_LVL_MASK         GENMASK(11, 10)
  50 +#define QSGMII_PHY_DEEMPHASIS_LVL(x)           FIELD_PREP(QSGMII_PHY_DEEMPHASIS_LVL_MASK, (x))
  51 +#define QSGMII_PHY_PHASE_LOOP_GAIN_MASK                GENMASK(14, 12)
  52 +#define QSGMII_PHY_PHASE_LOOP_GAIN(x)          FIELD_PREP(QSGMII_PHY_PHASE_LOOP_GAIN_MASK, (x))
  53 +#define QSGMII_PHY_RX_DC_BIAS_MASK             GENMASK(19, 18)
  54 +#define QSGMII_PHY_RX_DC_BIAS(x)               FIELD_PREP(QSGMII_PHY_RX_DC_BIAS_MASK, (x))
  55 +#define QSGMII_PHY_RX_INPUT_EQU_MASK           GENMASK(21, 20)
  56 +#define QSGMII_PHY_RX_INPUT_EQU(x)             FIELD_PREP(QSGMII_PHY_RX_INPUT_EQU_MASK, (x))
  57 +#define QSGMII_PHY_CDR_PI_SLEW_MASK            GENMASK(23, 22)
  58 +#define QSGMII_PHY_CDR_PI_SLEW(x)              FIELD_PREP(QSGMII_PHY_CDR_PI_SLEW_MASK, (x))
  59 +#define QSGMII_PHY_TX_SLEW_MASK                        GENMASK(27, 26)
  60 +#define QSGMII_PHY_TX_SLEW(x)                  FIELD_PREP(QSGMII_PHY_TX_SLEW_MASK, (x))
  61 +#define QSGMII_PHY_TX_DRV_AMP_MASK             GENMASK(31, 28)
  62 +#define QSGMII_PHY_TX_DRV_AMP(x)               FIELD_PREP(QSGMII_PHY_TX_DRV_AMP_MASK, (x))
  63
  64  struct ipq806x_gmac {
  65         struct platform_device *pdev;
  66 @@ -242,6 +253,64 @@ static void ipq806x_gmac_fix_mac_speed(v
  67         ipq806x_gmac_set_speed(gmac, speed);
  68  }
  69
  70 +static const struct soc_device_attribute ipq806x_gmac_soc_v1[] = {
  71 +       {
  72 +               .revision = "1.*",
  73 +       },
  74 +       {
  75 +               /* sentinel */
  76 +       }
  77 +};
  78 +
  79 +static int
  80 +ipq806x_gmac_configure_qsgmii_params(struct ipq806x_gmac *gmac)
  81 +{
  82 +       struct platform_device *pdev = gmac->pdev;
  83 +       const struct soc_device_attribute *soc;
  84 +       struct device *dev = &pdev->dev;
  85 +       u32 qsgmii_param;
  86 +
  87 +       switch (gmac->id) {
  88 +       case 1:
  89 +               soc = soc_device_match(ipq806x_gmac_soc_v1);
  90 +
  91 +               if (soc)
  92 +                       qsgmii_param = QSGMII_PHY_TX_DRV_AMP(0xc) |
  93 +                                      QSGMII_PHY_TX_SLEW(0x2) |
  94 +                                      QSGMII_PHY_DEEMPHASIS_LVL(0x2);
  95 +               else
  96 +                       qsgmii_param = QSGMII_PHY_TX_DRV_AMP(0xd) |
  97 +                                      QSGMII_PHY_TX_SLEW(0x0) |
  98 +                                      QSGMII_PHY_DEEMPHASIS_LVL(0x0);
  99 +
 100 +               qsgmii_param |= QSGMII_PHY_RX_DC_BIAS(0x2);
 101 +               break;
 102 +       case 2:
 103 +       case 3:
 104 +               qsgmii_param = QSGMII_PHY_RX_DC_BIAS(0x3) |
 105 +                              QSGMII_PHY_TX_DRV_AMP(0xc);
 106 +               break;
 107 +       default: /* gmac 0 can't be set in SGMII mode */
 108 +               dev_err(dev, "gmac id %d can't be in SGMII mode", gmac->id);
 109 +               return -EINVAL;
 110 +       }
 111 +
 112 +       /* Common params across all gmac id */
 113 +       qsgmii_param |= QSGMII_PHY_CDR_EN |
 114 +                       QSGMII_PHY_RX_FRONT_EN |
 115 +                       QSGMII_PHY_RX_SIGNAL_DETECT_EN |
 116 +                       QSGMII_PHY_TX_DRIVER_EN |
 117 +                       QSGMII_PHY_QSGMII_EN |
 118 +                       QSGMII_PHY_PHASE_LOOP_GAIN(0x4) |
 119 +                       QSGMII_PHY_RX_INPUT_EQU(0x1) |
 120 +                       QSGMII_PHY_CDR_PI_SLEW(0x2);
 121 +
 122 +       regmap_write(gmac->qsgmii_csr, QSGMII_PHY_SGMII_CTL(gmac->id),
 123 +                    qsgmii_param);
 124 +
 125 +       return 0;
 126 +}
 127 +
 128  static int ipq806x_gmac_probe(struct platform_device *pdev)
 129  {
 130         struct plat_stmmacenet_data *plat_dat;
 131 @@ -328,17 +397,9 @@ static int ipq806x_gmac_probe(struct pla
 132         regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
 133
 134         if (gmac->phy_mode == PHY_INTERFACE_MODE_SGMII) {
 135 -               regmap_write(gmac->qsgmii_csr, QSGMII_PHY_SGMII_CTL(gmac->id),
 136 -                            QSGMII_PHY_CDR_EN |
 137 -                            QSGMII_PHY_RX_FRONT_EN |
 138 -                            QSGMII_PHY_RX_SIGNAL_DETECT_EN |
 139 -                            QSGMII_PHY_TX_DRIVER_EN |
 140 -                            QSGMII_PHY_QSGMII_EN |
 141 -                            0x4ul << QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET |
 142 -                            0x3ul << QSGMII_PHY_RX_DC_BIAS_OFFSET |
 143 -                            0x1ul << QSGMII_PHY_RX_INPUT_EQU_OFFSET |
 144 -                            0x2ul << QSGMII_PHY_CDR_PI_SLEW_OFFSET |
 145 -                            0xCul << QSGMII_PHY_TX_DRV_AMP_OFFSET);
 146 +               err = ipq806x_gmac_configure_qsgmii_params(gmac);
 147 +               if (err)
 148 +                       goto err_remove_config_dt;
 149         }
 150
 151         plat_dat->has_gmac = true;