git.openwrt.org Git - openwrt/staging/chunkeey.git/blob

   1 From bc447c21304c1297f340d3daaf69915ebbc1f882 Mon Sep 17 00:00:00 2001
   2 From: Vladimir Oltean <vladimir.oltean@nxp.com>
   3 Date: Mon, 30 Sep 2019 19:20:26 +0300
   4 Subject: [PATCH] mii: Add helpers for parsing SGMII auto-negotiation
   5
   6 Typically a MAC PCS auto-configures itself after it receives the
   7 negotiated link settings from the PHY, but some MAC devices are more
   8 special and need manual manipulation of the SGMII AN result.
   9
  10 Therefore, add the bit definitions for the SGMII registers 4 and 5
  11 (local device ability, link partner ability), as well as a link_mode
  12 conversion helper that can be used to feed the AN results into
  13 phy_resolve_aneg_linkmode.
  14
  15 Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
  16 ---
  17  include/linux/mii.h      | 50 ++++++++++++++++++++++++++++++++++++++++++++++++
  18  include/uapi/linux/mii.h | 10 ++++++++++
  19  2 files changed, 60 insertions(+)
  20
  21 --- a/include/linux/mii.h
  22 +++ b/include/linux/mii.h
  23 @@ -373,6 +373,56 @@ static inline u32 mii_lpa_to_ethtool_lpa
  24  }
  25
  26  /**
  27 + * mii_lpa_mod_linkmode_adv_sgmii
  28 + * @lp_advertising: pointer to destination link mode.
  29 + * @lpa: value of the MII_LPA register
  30 + *
  31 + * A small helper function that translates MII_LPA bits to
  32 + * linkmode advertisement settings for SGMII.
  33 + * Leaves other bits unchanged.
  34 + */
  35 +static inline void
  36 +mii_lpa_mod_linkmode_lpa_sgmii(unsigned long *lp_advertising, u32 lpa)
  37 +{
  38 +       u32 speed_duplex = lpa & LPA_SGMII_DPX_SPD_MASK;
  39 +
  40 +       linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, lp_advertising,
  41 +                        speed_duplex == LPA_SGMII_1000HALF);
  42 +
  43 +       linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, lp_advertising,
  44 +                        speed_duplex == LPA_SGMII_1000FULL);
  45 +
  46 +       linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, lp_advertising,
  47 +                        speed_duplex == LPA_SGMII_100HALF);
  48 +
  49 +       linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, lp_advertising,
  50 +                        speed_duplex == LPA_SGMII_100FULL);
  51 +
  52 +       linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, lp_advertising,
  53 +                        speed_duplex == LPA_SGMII_10HALF);
  54 +
  55 +       linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, lp_advertising,
  56 +                        speed_duplex == LPA_SGMII_10FULL);
  57 +}
  58 +
  59 +/**
  60 + * mii_lpa_to_linkmode_adv_sgmii
  61 + * @advertising: pointer to destination link mode.
  62 + * @lpa: value of the MII_LPA register
  63 + *
  64 + * A small helper function that translates MII_ADVERTISE bits
  65 + * to linkmode advertisement settings when in SGMII mode.
  66 + * Clears the old value of advertising.
  67 + */
  68 +static inline void mii_lpa_to_linkmode_lpa_sgmii(unsigned long *lp_advertising,
  69 +                                                u32 lpa)
  70 +{
  71 +       linkmode_zero(lp_advertising);
  72 +
  73 +       mii_lpa_mod_linkmode_lpa_sgmii(lp_advertising, lpa);
  74 +}
  75 +
  76 +/**
  77   * mii_adv_mod_linkmode_adv_t
  78   * @advertising:pointer to destination link mode.
  79   * @adv: value of the MII_ADVERTISE register
  80 --- a/include/uapi/linux/mii.h
  81 +++ b/include/uapi/linux/mii.h
  82 @@ -71,6 +71,7 @@
  83  /* Advertisement control register. */
  84  #define ADVERTISE_SLCT         0x001f  /* Selector bits               */
  85  #define ADVERTISE_CSMA         0x0001  /* Only selector supported     */
  86 +#define ADVERTISE_SGMII                0x0001  /* Can do SGMII                */
  87  #define ADVERTISE_10HALF       0x0020  /* Try for 10mbps half-duplex  */
  88  #define ADVERTISE_1000XFULL    0x0020  /* Try for 1000BASE-X full-duplex */
  89  #define ADVERTISE_10FULL       0x0040  /* Try for 10mbps full-duplex  */
  90 @@ -94,6 +95,7 @@
  91
  92  /* Link partner ability register. */
  93  #define LPA_SLCT               0x001f  /* Same as advertise selector  */
  94 +#define LPA_SGMII              0x0001  /* Can do SGMII                */
  95  #define LPA_10HALF             0x0020  /* Can do 10mbps half-duplex   */
  96  #define LPA_1000XFULL          0x0020  /* Can do 1000BASE-X full-duplex */
  97  #define LPA_10FULL             0x0040  /* Can do 10mbps full-duplex   */
  98 @@ -104,11 +106,19 @@
  99  #define LPA_1000XPAUSE_ASYM    0x0100  /* Can do 1000BASE-X pause asym*/
 100  #define LPA_100BASE4           0x0200  /* Can do 100mbps 4k packets   */
 101  #define LPA_PAUSE_CAP          0x0400  /* Can pause                   */
 102 +#define LPA_SGMII_DPX_SPD_MASK 0x1C00  /* SGMII duplex and speed bits */
 103 +#define LPA_SGMII_10HALF       0x0000  /* Can do SGMII 10mbps half-duplex */
 104 +#define LPA_SGMII_10FULL       0x1000  /* Can do SGMII 10mbps full-duplex */
 105 +#define LPA_SGMII_100HALF      0x0400  /* Can do SGMII 100mbps half-duplex */
 106 +#define LPA_SGMII_100FULL      0x1400  /* Can do SGMII 100mbps full-duplex */
 107  #define LPA_PAUSE_ASYM         0x0800  /* Can pause asymetrically     */
 108 +#define LPA_SGMII_1000HALF     0x0800  /* Can do SGMII 1000mbps half-duplex */
 109 +#define LPA_SGMII_1000FULL     0x1800  /* Can do SGMII 1000mbps full-duplex */
 110  #define LPA_RESV               0x1000  /* Unused...                   */
 111  #define LPA_RFAULT             0x2000  /* Link partner faulted        */
 112  #define LPA_LPACK              0x4000  /* Link partner acked us       */
 113  #define LPA_NPAGE              0x8000  /* Next page bit               */
 114 +#define LPA_SGMII_LINK         0x8000  /* Link partner has link       */
 115
 116  #define LPA_DUPLEX             (LPA_10FULL | LPA_100FULL)
 117  #define LPA_100                        (LPA_100FULL | LPA_100HALF | LPA_100BASE4)