git.openwrt.org Git - openwrt/staging/dangole.git/blob

   1 From a3ceeebaaa66e6786490e850b5019808da3785c0 Mon Sep 17 00:00:00 2001
   2 From: Andrey Konovalov <andrey.konovalov@linaro.org>
   3 Date: Mon, 20 Jan 2020 05:15:57 -0300
   4 Subject: [PATCH] media: dt-bindings: media: i2c: Add IMX219 CMOS
   5  sensor binding
   6
   7 Commit 9d730f2cf4c0391785855dd231577d2de2594df9 upstream.
   8 (Currently on linux-media/master, queued for 5.7)
   9
  10 Add YAML device tree binding for IMX219 CMOS image sensor, and
  11 the relevant MAINTAINERS entries.
  12
  13 Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
  14 Reviewed-by: Rob Herring <robh@kernel.org>
  15 Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
  16 Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
  17 ---
  18  .../devicetree/bindings/media/i2c/imx219.yaml | 114 ++++++++++++++++++
  19  MAINTAINERS                                   |   8 ++
  20  2 files changed, 122 insertions(+)
  21  create mode 100644 Documentation/devicetree/bindings/media/i2c/imx219.yaml
  22
  23 --- /dev/null
  24 +++ b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
  25 @@ -0,0 +1,114 @@
  26 +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
  27 +%YAML 1.2
  28 +---
  29 +$id: http://devicetree.org/schemas/media/i2c/imx219.yaml#
  30 +$schema: http://devicetree.org/meta-schemas/core.yaml#
  31 +
  32 +title: Sony 1/4.0-Inch 8Mpixel CMOS Digital Image Sensor
  33 +
  34 +maintainers:
  35 +  - Dave Stevenson <dave.stevenson@raspberrypi.com>
  36 +
  37 +description: |-
  38 +  The Sony imx219 is a 1/4.0-inch CMOS active pixel digital image sensor
  39 +  with an active array size of 3280H x 2464V. It is programmable through
  40 +  I2C interface. The I2C address is fixed to 0x10 as per sensor data sheet.
  41 +  Image data is sent through MIPI CSI-2, which is configured as either 2 or
  42 +  4 data lanes.
  43 +
  44 +properties:
  45 +  compatible:
  46 +    const: sony,imx219
  47 +
  48 +  reg:
  49 +    description: I2C device address
  50 +    maxItems: 1
  51 +
  52 +  clocks:
  53 +    maxItems: 1
  54 +
  55 +  VDIG-supply:
  56 +    description:
  57 +      Digital I/O voltage supply, 1.8 volts
  58 +
  59 +  VANA-supply:
  60 +    description:
  61 +      Analog voltage supply, 2.8 volts
  62 +
  63 +  VDDL-supply:
  64 +    description:
  65 +      Digital core voltage supply, 1.2 volts
  66 +
  67 +  reset-gpios:
  68 +    description: |-
  69 +      Reference to the GPIO connected to the xclr pin, if any.
  70 +      Must be released (set high) after all supplies are applied.
  71 +
  72 +  # See ../video-interfaces.txt for more details
  73 +  port:
  74 +    type: object
  75 +    properties:
  76 +      endpoint:
  77 +        type: object
  78 +        properties:
  79 +          data-lanes:
  80 +            description: |-
  81 +              The sensor supports either two-lane, or four-lane operation.
  82 +              If this property is omitted four-lane operation is assumed.
  83 +              For two-lane operation the property must be set to <1 2>.
  84 +            items:
  85 +              - const: 1
  86 +              - const: 2
  87 +
  88 +          clock-noncontinuous:
  89 +            type: boolean
  90 +            description: |-
  91 +              MIPI CSI-2 clock is non-continuous if this property is present,
  92 +              otherwise it's continuous.
  93 +
  94 +          link-frequencies:
  95 +            allOf:
  96 +              - $ref: /schemas/types.yaml#/definitions/uint64-array
  97 +            description:
  98 +              Allowed data bus frequencies.
  99 +
 100 +        required:
 101 +          - link-frequencies
 102 +
 103 +required:
 104 +  - compatible
 105 +  - reg
 106 +  - clocks
 107 +  - VANA-supply
 108 +  - VDIG-supply
 109 +  - VDDL-supply
 110 +  - port
 111 +
 112 +additionalProperties: false
 113 +
 114 +examples:
 115 +  - |
 116 +    i2c0 {
 117 +        #address-cells = <1>;
 118 +        #size-cells = <0>;
 119 +
 120 +        imx219: sensor@10 {
 121 +            compatible = "sony,imx219";
 122 +            reg = <0x10>;
 123 +            clocks = <&imx219_clk>;
 124 +            VANA-supply = <&imx219_vana>;   /* 2.8v */
 125 +            VDIG-supply = <&imx219_vdig>;   /* 1.8v */
 126 +            VDDL-supply = <&imx219_vddl>;   /* 1.2v */
 127 +
 128 +            port {
 129 +                imx219_0: endpoint {
 130 +                    remote-endpoint = <&csi1_ep>;
 131 +                    data-lanes = <1 2>;
 132 +                    clock-noncontinuous;
 133 +                    link-frequencies = /bits/ 64 <456000000>;
 134 +                };
 135 +            };
 136 +        };
 137 +    };
 138 +
 139 +...
 140 --- a/MAINTAINERS
 141 +++ b/MAINTAINERS
 142 @@ -15143,6 +15143,14 @@ S:     Maintained
 143  F:     drivers/media/i2c/imx214.c
 144  F:     Documentation/devicetree/bindings/media/i2c/sony,imx214.txt
 145
 146 +SONY IMX219 SENSOR DRIVER
 147 +M:     Dave Stevenson <dave.stevenson@raspberrypi.com>
 148 +L:     linux-media@vger.kernel.org
 149 +T:     git git://linuxtv.org/media_tree.git
 150 +S:     Maintained
 151 +F:     drivers/media/i2c/imx219.c
 152 +F:     Documentation/devicetree/bindings/media/i2c/imx219.yaml
 153 +
 154  SONY IMX258 SENSOR DRIVER
 155  M:     Sakari Ailus <sakari.ailus@linux.intel.com>
 156  L:     linux-media@vger.kernel.org