d09c2055a3ef875520defcba70d2f5d094405eff
[openwrt/staging/neocturne.git] /
1 From 9aad43ad3285fc21158fb416830a6156a9a31fa5 Mon Sep 17 00:00:00 2001
2 From: Balsam CHIHI <bchihi@baylibre.com>
3 Date: Tue, 7 Mar 2023 16:45:22 +0100
4 Subject: [PATCH 15/42] thermal/drivers/mediatek/lvts_thermal: Add AP domain
5 for mt8195
6
7 Add MT8195 AP Domain support to LVTS Driver.
8
9 Take the opportunity to update the comments to show calibration data
10 information related to the new domain.
11
12 [dlezcano]: Massaged a bit the changelog
13
14 Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
15 Tested-by: Chen-Yu Tsai <wenst@chromium.org>
16 Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
17 Link: https://lore.kernel.org/r/20230307154524.118541-3-bchihi@baylibre.com
18 ---
19 drivers/thermal/mediatek/lvts_thermal.c | 94 +++++++++++++++++++------
20 1 file changed, 74 insertions(+), 20 deletions(-)
21
22 --- a/drivers/thermal/mediatek/lvts_thermal.c
23 +++ b/drivers/thermal/mediatek/lvts_thermal.c
24 @@ -530,29 +530,33 @@ static int lvts_sensor_init(struct devic
25 * The efuse blob values follows the sensor enumeration per thermal
26 * controller. The decoding of the stream is as follow:
27 *
28 - * <--?-> <----big0 ???---> <-sensor0-> <-0->
29 - * ------------------------------------------
30 - * index in the stream: : | 0x0 | 0x1 | 0x2 | 0x3 | 0x4 | 0x5 | 0x6 |
31 - * ------------------------------------------
32 + * stream index map for MCU Domain :
33 *
34 - * <--sensor1--><-0-> <----big1 ???---> <-sen
35 - * ------------------------------------------
36 - * | 0x7 | 0x8 | 0x9 | 0xA | 0xB | OxC | OxD |
37 - * ------------------------------------------
38 + * <-----mcu-tc#0-----> <-----sensor#0-----> <-----sensor#1----->
39 + * 0x01 | 0x02 | 0x03 | 0x04 | 0x05 | 0x06 | 0x07 | 0x08 | 0x09
40 *
41 - * sor0-> <-0-> <-sensor1-> <-0-> ..........
42 - * ------------------------------------------
43 - * | 0x7 | 0x8 | 0x9 | 0xA | 0xB | OxC | OxD |
44 - * ------------------------------------------
45 + * <-----mcu-tc#1-----> <-----sensor#2-----> <-----sensor#3----->
46 + * 0x0A | 0x0B | 0x0C | 0x0D | 0x0E | 0x0F | 0x10 | 0x11 | 0x12
47 *
48 - * And so on ...
49 + * <-----mcu-tc#2-----> <-----sensor#4-----> <-----sensor#5-----> <-----sensor#6-----> <-----sensor#7----->
50 + * 0x13 | 0x14 | 0x15 | 0x16 | 0x17 | 0x18 | 0x19 | 0x1A | 0x1B | 0x1C | 0x1D | 0x1E | 0x1F | 0x20 | 0x21
51 + *
52 + * stream index map for AP Domain :
53 + *
54 + * <-----ap--tc#0-----> <-----sensor#0-----> <-----sensor#1----->
55 + * 0x22 | 0x23 | 0x24 | 0x25 | 0x26 | 0x27 | 0x28 | 0x29 | 0x2A
56 + *
57 + * <-----ap--tc#1-----> <-----sensor#2-----> <-----sensor#3----->
58 + * 0x2B | 0x2C | 0x2D | 0x2E | 0x2F | 0x30 | 0x31 | 0x32 | 0x33
59 + *
60 + * <-----ap--tc#2-----> <-----sensor#4-----> <-----sensor#5-----> <-----sensor#6----->
61 + * 0x34 | 0x35 | 0x36 | 0x37 | 0x38 | 0x39 | 0x3A | 0x3B | 0x3C | 0x3D | 0x3E | 0x3F
62 + *
63 + * <-----ap--tc#3-----> <-----sensor#7-----> <-----sensor#8----->
64 + * 0x40 | 0x41 | 0x42 | 0x43 | 0x44 | 0x45 | 0x46 | 0x47 | 0x48
65 *
66 * The data description gives the offset of the calibration data in
67 * this bytes stream for each sensor.
68 - *
69 - * Each thermal controller can handle up to 4 sensors max, we don't
70 - * care if there are less as the array of calibration is sized to 4
71 - * anyway. The unused sensor slot will be zeroed.
72 */
73 static int lvts_calibration_init(struct device *dev, struct lvts_ctrl *lvts_ctrl,
74 const struct lvts_ctrl_data *lvts_ctrl_data,
75 @@ -1165,7 +1169,7 @@ static int lvts_remove(struct platform_d
76 return 0;
77 }
78
79 -static const struct lvts_ctrl_data mt8195_lvts_data_ctrl[] = {
80 +static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = {
81 {
82 .cal_offset = { 0x04, 0x07 },
83 .lvts_sensor = {
84 @@ -1200,13 +1204,63 @@ static const struct lvts_ctrl_data mt819
85 }
86 };
87
88 +static const struct lvts_ctrl_data mt8195_lvts_ap_data_ctrl[] = {
89 + {
90 + .cal_offset = { 0x25, 0x28 },
91 + .lvts_sensor = {
92 + { .dt_id = MT8195_AP_VPU0 },
93 + { .dt_id = MT8195_AP_VPU1 }
94 + },
95 + .num_lvts_sensor = 2,
96 + .offset = 0x0,
97 + .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195,
98 + },
99 + {
100 + .cal_offset = { 0x2e, 0x31 },
101 + .lvts_sensor = {
102 + { .dt_id = MT8195_AP_GPU0 },
103 + { .dt_id = MT8195_AP_GPU1 }
104 + },
105 + .num_lvts_sensor = 2,
106 + .offset = 0x100,
107 + .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195,
108 + },
109 + {
110 + .cal_offset = { 0x37, 0x3a, 0x3d },
111 + .lvts_sensor = {
112 + { .dt_id = MT8195_AP_VDEC },
113 + { .dt_id = MT8195_AP_IMG },
114 + { .dt_id = MT8195_AP_INFRA },
115 + },
116 + .num_lvts_sensor = 3,
117 + .offset = 0x200,
118 + .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195,
119 + },
120 + {
121 + .cal_offset = { 0x43, 0x46 },
122 + .lvts_sensor = {
123 + { .dt_id = MT8195_AP_CAM0 },
124 + { .dt_id = MT8195_AP_CAM1 }
125 + },
126 + .num_lvts_sensor = 2,
127 + .offset = 0x300,
128 + .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195,
129 + }
130 +};
131 +
132 static const struct lvts_data mt8195_lvts_mcu_data = {
133 - .lvts_ctrl = mt8195_lvts_data_ctrl,
134 - .num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_data_ctrl),
135 + .lvts_ctrl = mt8195_lvts_mcu_data_ctrl,
136 + .num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl),
137 +};
138 +
139 +static const struct lvts_data mt8195_lvts_ap_data = {
140 + .lvts_ctrl = mt8195_lvts_ap_data_ctrl,
141 + .num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_ap_data_ctrl),
142 };
143
144 static const struct of_device_id lvts_of_match[] = {
145 { .compatible = "mediatek,mt8195-lvts-mcu", .data = &mt8195_lvts_mcu_data },
146 + { .compatible = "mediatek,mt8195-lvts-ap", .data = &mt8195_lvts_ap_data },
147 {},
148 };
149 MODULE_DEVICE_TABLE(of, lvts_of_match);