git.openwrt.org Git - openwrt/staging/pepe2k.git/blob

   1 From 33b514cb16dbf13395a0becf7442d19676ae4224 Mon Sep 17 00:00:00 2001
   2 From: Jonathan Bell <jonathan@raspberrypi.com>
   3 Date: Fri, 15 Sep 2023 17:33:03 +0100
   4 Subject: [PATCH] drivers: rtc-rpi: add battery charge circuit control and
   5  readback
   6
   7 Parse devicetree for a charger voltage and apply it. If nonzero and a
   8 valid voltage, the firmware will enable charging, otherwise the charger
   9 circuit is disabled.
  10
  11 Add sysfs attributes to read back the supported charge voltage range,
  12 the measured battery voltage, and the charger setpoint.
  13
  14 Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
  15 ---
  16  drivers/rtc/rtc-rpi.c | 106 ++++++++++++++++++++++++++++++++++++++++--
  17  1 file changed, 103 insertions(+), 3 deletions(-)
  18
  19 --- a/drivers/rtc/rtc-rpi.c
  20 +++ b/drivers/rtc/rtc-rpi.c
  21 @@ -19,11 +19,22 @@
  22  struct rpi_rtc_data {
  23         struct rtc_device *rtc;
  24         struct rpi_firmware *fw;
  25 +       u32 bbat_vchg_microvolts;
  26  };
  27
  28  #define RPI_FIRMWARE_GET_RTC_REG 0x00030087
  29  #define RPI_FIRMWARE_SET_RTC_REG 0x00038087
  30 -enum {RTC_TIME, RTC_ALARM, RTC_ALARM_PENDING, RTC_ALARM_ENABLE};
  31 +
  32 +enum {
  33 +       RTC_TIME,
  34 +       RTC_ALARM,
  35 +       RTC_ALARM_PENDING,
  36 +       RTC_ALARM_ENABLE,
  37 +       RTC_BBAT_CHG_VOLTS,
  38 +       RTC_BBAT_CHG_VOLTS_MIN,
  39 +       RTC_BBAT_CHG_VOLTS_MAX,
  40 +       RTC_BBAT_VOLTS
  41 +};
  42
  43  static int rpi_rtc_read_time(struct device *dev, struct rtc_time *tm)
  44  {
  45 @@ -114,6 +125,83 @@ static const struct rtc_class_ops rpi_rt
  46         .alarm_irq_enable = rpi_rtc_alarm_irq_enable,
  47  };
  48
  49 +static int rpi_rtc_set_charge_voltage(struct device *dev)
  50 +{
  51 +       struct rpi_rtc_data *vrtc = dev_get_drvdata(dev);
  52 +       u32 data[2] = {RTC_BBAT_CHG_VOLTS, vrtc->bbat_vchg_microvolts};
  53 +       int err;
  54 +
  55 +       err = rpi_firmware_property(vrtc->fw, RPI_FIRMWARE_SET_RTC_REG,
  56 +                                   &data, sizeof(data));
  57 +
  58 +       if (err)
  59 +               dev_err(dev, "failed to set trickle charge voltage to %uuV: %d\n",
  60 +                       vrtc->bbat_vchg_microvolts, err);
  61 +       else if (vrtc->bbat_vchg_microvolts)
  62 +               dev_info(dev, "trickle charging enabled at %uuV\n",
  63 +                        vrtc->bbat_vchg_microvolts);
  64 +
  65 +       return err;
  66 +}
  67 +
  68 +static ssize_t rpi_rtc_print_uint_reg(struct device *dev, char *buf, u32 reg)
  69 +{
  70 +       struct rpi_rtc_data *vrtc = dev_get_drvdata(dev->parent);
  71 +       u32 data[2] = {reg, 0};
  72 +       int ret = 0;
  73 +
  74 +       ret = rpi_firmware_property(vrtc->fw, RPI_FIRMWARE_GET_RTC_REG,
  75 +                                   &data, sizeof(data));
  76 +       if (ret < 0)
  77 +               return ret;
  78 +
  79 +       return sprintf(buf, "%u\n", data[1]);
  80 +}
  81 +
  82 +static ssize_t charging_voltage_show(struct device *dev,
  83 +                                    struct device_attribute *attr,
  84 +                                    char *buf)
  85 +{
  86 +       return rpi_rtc_print_uint_reg(dev, buf, RTC_BBAT_CHG_VOLTS);
  87 +}
  88 +static DEVICE_ATTR_RO(charging_voltage);
  89 +
  90 +static ssize_t charging_voltage_min_show(struct device *dev,
  91 +                                        struct device_attribute *attr,
  92 +                                        char *buf)
  93 +{
  94 +       return rpi_rtc_print_uint_reg(dev, buf, RTC_BBAT_CHG_VOLTS_MIN);
  95 +}
  96 +static DEVICE_ATTR_RO(charging_voltage_min);
  97 +
  98 +static ssize_t charging_voltage_max_show(struct device *dev,
  99 +                                        struct device_attribute *attr,
 100 +                                        char *buf)
 101 +{
 102 +       return rpi_rtc_print_uint_reg(dev, buf, RTC_BBAT_CHG_VOLTS_MAX);
 103 +}
 104 +static DEVICE_ATTR_RO(charging_voltage_max);
 105 +
 106 +static ssize_t battery_voltage_show(struct device *dev,
 107 +                                   struct device_attribute *attr,
 108 +                                   char *buf)
 109 +{
 110 +       return rpi_rtc_print_uint_reg(dev, buf, RTC_BBAT_VOLTS);
 111 +}
 112 +static DEVICE_ATTR_RO(battery_voltage);
 113 +
 114 +static struct attribute *rpi_rtc_attrs[] = {
 115 +       &dev_attr_charging_voltage.attr,
 116 +       &dev_attr_charging_voltage_min.attr,
 117 +       &dev_attr_charging_voltage_max.attr,
 118 +       &dev_attr_battery_voltage.attr,
 119 +       NULL
 120 +};
 121 +
 122 +static const struct attribute_group rpi_rtc_sysfs_files = {
 123 +       .attrs = rpi_rtc_attrs,
 124 +};
 125 +
 126  static int rpi_rtc_probe(struct platform_device *pdev)
 127  {
 128         struct rpi_rtc_data *vrtc;
 129 @@ -151,10 +239,22 @@ static int rpi_rtc_probe(struct platform
 130         clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, vrtc->rtc->features);
 131
 132         vrtc->rtc->ops = &rpi_rtc_ops;
 133 -       ret = devm_rtc_register_device(vrtc->rtc);
 134 +       ret = rtc_add_group(vrtc->rtc, &rpi_rtc_sysfs_files);
 135 +       if (ret)
 136 +               return ret;
 137
 138         rpi_rtc_alarm_clear_pending(dev);
 139 -       return ret;
 140 +
 141 +       /*
 142 +        * Optionally enable trickle charging - if the property isn't
 143 +        * present (or set to zero), trickle charging is disabled.
 144 +        */
 145 +       of_property_read_u32(np, "trickle-charge-microvolt",
 146 +                            &vrtc->bbat_vchg_microvolts);
 147 +
 148 +       rpi_rtc_set_charge_voltage(dev);
 149 +
 150 +       return devm_rtc_register_device(vrtc->rtc);
 151  }
 152
 153  static const struct of_device_id rpi_rtc_dt_match[] = {