e24dca819b10d3ca3a86a1a6ee5e04d4962178be
[openwrt/staging/neocturne.git] /
1 From 1414d30660d201f515a9d877571ceea9ca190b6a Mon Sep 17 00:00:00 2001
2 From: =?UTF-8?q?Alexis=20Lothor=C3=A9?= <alexis.lothore@bootlin.com>
3 Date: Mon, 29 May 2023 10:02:43 +0200
4 Subject: [PATCH 3/6] net: dsa: mv88e6xxx: add field to specify internal phys
5 layout
6 MIME-Version: 1.0
7 Content-Type: text/plain; charset=UTF-8
8 Content-Transfer-Encoding: 8bit
9
10 mv88e6xxx currently assumes that switch equipped with internal phys have
11 those phys mapped contiguously starting from port 0 (see
12 mv88e6xxx_phy_is_internal). However, some switches have internal PHYs but
13 NOT starting from port 0. For example 88e6393X, 88E6193X and 88E6191X have
14 integrated PHYs available on ports 1 to 8
15 To properly support this offset, add a new field to allow specifying an
16 internal PHYs layout. If field is not set, default layout is assumed (start
17 at port 0)
18
19 Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
20 Reviewed-by: Andrew Lunn <andrew@lunn.ch>
21 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
22 ---
23 drivers/net/dsa/mv88e6xxx/chip.c | 4 +++-
24 drivers/net/dsa/mv88e6xxx/chip.h | 5 +++++
25 drivers/net/dsa/mv88e6xxx/global2.c | 5 ++++-
26 3 files changed, 12 insertions(+), 2 deletions(-)
27
28 --- a/drivers/net/dsa/mv88e6xxx/chip.c
29 +++ b/drivers/net/dsa/mv88e6xxx/chip.c
30 @@ -472,7 +472,9 @@ restore_link:
31
32 static int mv88e6xxx_phy_is_internal(struct mv88e6xxx_chip *chip, int port)
33 {
34 - return port < chip->info->num_internal_phys;
35 + return port >= chip->info->internal_phys_offset &&
36 + port < chip->info->num_internal_phys +
37 + chip->info->internal_phys_offset;
38 }
39
40 static int mv88e6xxx_port_ppu_updates(struct mv88e6xxx_chip *chip, int port)
41 --- a/drivers/net/dsa/mv88e6xxx/chip.h
42 +++ b/drivers/net/dsa/mv88e6xxx/chip.h
43 @@ -167,6 +167,11 @@ struct mv88e6xxx_info {
44
45 /* Supports PTP */
46 bool ptp_support;
47 +
48 + /* Internal PHY start index. 0 means that internal PHYs range starts at
49 + * port 0, 1 means internal PHYs range starts at port 1, etc
50 + */
51 + unsigned int internal_phys_offset;
52 };
53
54 struct mv88e6xxx_atu_entry {
55 --- a/drivers/net/dsa/mv88e6xxx/global2.c
56 +++ b/drivers/net/dsa/mv88e6xxx/global2.c
57 @@ -1185,8 +1185,11 @@ int mv88e6xxx_g2_irq_mdio_setup(struct m
58 struct mii_bus *bus)
59 {
60 int phy, irq, err, err_phy;
61 + int phy_start = chip->info->internal_phys_offset;
62 + int phy_end = chip->info->internal_phys_offset +
63 + chip->info->num_internal_phys;
64
65 - for (phy = 0; phy < chip->info->num_internal_phys; phy++) {
66 + for (phy = phy_start; phy < phy_end; phy++) {
67 irq = irq_find_mapping(chip->g2_irq.domain, phy);
68 if (irq < 0) {
69 err = irq;