crypto: s5p-sss - Fix spinlock recursion on LRW(AES)
Running TCRYPT with LRW compiled causes spinlock recursion:
testing speed of async lrw(aes) (lrw(ecb-aes-s5p)) encryption
tcrypt: test 0 (256 bit key, 16 byte blocks): 19007 operations in 1 seconds (304112 bytes)
tcrypt: test 1 (256 bit key, 64 byte blocks): 15753 operations in 1 seconds (
1008192 bytes)
tcrypt: test 2 (256 bit key, 256 byte blocks): 14293 operations in 1 seconds (
3659008 bytes)
tcrypt: test 3 (256 bit key, 1024 byte blocks): 11906 operations in 1 seconds (
12191744 bytes)
tcrypt: test 4 (256 bit key, 8192 byte blocks):
BUG: spinlock recursion on CPU#1, irq/84-
10830000/89
lock: 0xeea99a68, .magic:
dead4ead, .owner: irq/84-
10830000/89, .owner_cpu: 1
CPU: 1 PID: 89 Comm: irq/84-
10830000 Not tainted
4.11.0-rc1-00001-g897ca6d0800d #559
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<
c010e1ec>] (unwind_backtrace) from [<
c010ae1c>] (show_stack+0x10/0x14)
[<
c010ae1c>] (show_stack) from [<
c03449c0>] (dump_stack+0x78/0x8c)
[<
c03449c0>] (dump_stack) from [<
c015de68>] (do_raw_spin_lock+0x11c/0x120)
[<
c015de68>] (do_raw_spin_lock) from [<
c0720110>] (_raw_spin_lock_irqsave+0x20/0x28)
[<
c0720110>] (_raw_spin_lock_irqsave) from [<
c0572ca0>] (s5p_aes_crypt+0x2c/0xb4)
[<
c0572ca0>] (s5p_aes_crypt) from [<
bf1d8aa4>] (do_encrypt+0x78/0xb0 [lrw])
[<
bf1d8aa4>] (do_encrypt [lrw]) from [<
bf1d8b00>] (encrypt_done+0x24/0x54 [lrw])
[<
bf1d8b00>] (encrypt_done [lrw]) from [<
c05732a0>] (s5p_aes_complete+0x60/0xcc)
[<
c05732a0>] (s5p_aes_complete) from [<
c0573440>] (s5p_aes_interrupt+0x134/0x1a0)
[<
c0573440>] (s5p_aes_interrupt) from [<
c01667c4>] (irq_thread_fn+0x1c/0x54)
[<
c01667c4>] (irq_thread_fn) from [<
c0166a98>] (irq_thread+0x12c/0x1e0)
[<
c0166a98>] (irq_thread) from [<
c0136a28>] (kthread+0x108/0x138)
[<
c0136a28>] (kthread) from [<
c0107778>] (ret_from_fork+0x14/0x3c)
Interrupt handling routine was calling req->base.complete() under
spinlock. In most cases this wasn't fatal but when combined with some
of the cipher modes (like LRW) this caused recursion - starting the new
encryption (s5p_aes_crypt()) while still holding the spinlock from
previous round (s5p_aes_complete()).
Beside that, the s5p_aes_interrupt() error handling path could execute
two completions in case of error for RX and TX blocks.
Rewrite the interrupt handling routine and the completion by:
1. Splitting the operations on scatterlist copies from
s5p_aes_complete() into separate s5p_sg_done(). This still should be
done under lock.
The s5p_aes_complete() now only calls req->base.complete() and it has
to be called outside of lock.
2. Moving the s5p_aes_complete() out of spinlock critical sections.
In interrupt service routine s5p_aes_interrupts(), it appeared in few
places, including error paths inside other functions called from ISR.
This code was not so obvious to read so simplify it by putting the
s5p_aes_complete() only within ISR level.
Reported-by: Nathan Royce <nroycea+kernel@gmail.com>
Cc: <stable@vger.kernel.org> # v4.10.x: 07de4bc88c crypto: s5p-sss - Fix completing
Cc: <stable@vger.kernel.org> # v4.10.x
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>