ARM: BCM53573: Specify ports for USB LED for Tenda AC9

This uses trigger-sources documented in commit 80dc6e1cd85fc ("dt-bindings:
leds: document new trigger-sources property") to specify USB ports. Such an
information can be used by operating system to setup LEDs behavior.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
index 34417dac1cd0937292469da3b86b54f2e8cfff1c..19e61b5b066c574d8ee464a6fe91d564c1436e86 100644 (file)
--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
@@ -26,6 +26,8 @@
                usb {
                        label = "bcm53xx:blue:usb";
                        gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+                       trigger-sources = <&ohci_port1>, <&ehci_port1>;
+                       linux,default-trigger = "usbport";
                };
 
                wps {

diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi
index eae623f7640138abb794f52cfc2604321947308e..c698a565b8ae9e2134c36fc796e983159b686a67 100644 (file)
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -138,10 +138,12 @@
 
                                ehci_port1: port@1 {
                                        reg = <1>;
+                                       #trigger-source-cells = <0>;
                                };
 
                                ehci_port2: port@2 {
                                        reg = <2>;
+                                       #trigger-source-cells = <0>;
                                };
                        };
 
@@ -158,10 +160,12 @@
 
                                ohci_port1: port@1 {
                                        reg = <1>;
+                                       #trigger-source-cells = <0>;
                                };
 
                                ohci_port2: port@2 {
                                        reg = <2>;
+                                       #trigger-source-cells = <0>;
                                };
                        };
                };