#include <asm/hardware/vic.h>
#include <mach/hardware.h>
-#include <mach/spear.h>
.macro disable_fiq
.endm
#define __MACH_HARDWARE_H
#include <plat/hardware.h>
+#include <mach/spear.h>
/* Vitual to physical translation of statically mapped space */
#define IO_ADDRESS(x) (x | 0xF0000000)
#ifndef __MACH_MISC_REGS_H
#define __MACH_MISC_REGS_H
-#include <mach/spear.h>
+#include <mach/hardware.h>
#define MISC_BASE IOMEM(VA_SPEAR3XX_ICM3_MISC_REG_BASE)
#ifndef __MACH_SPEAR3XX_H
#define __MACH_SPEAR3XX_H
-#include <mach/hardware.h>
#include <mach/spear300.h>
#include <mach/spear310.h>
#include <mach/spear320.h>
#include <asm/irq.h>
#include <plat/shirq.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
/* pad multiplexing support */
/* muxing registers */
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
/* padmux devices to enable */
static struct pmx_dev *pmx_devs[] = {
#include <asm/irq.h>
#include <plat/shirq.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
/* pad multiplexing support */
/* muxing registers */
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
/* padmux devices to enable */
static struct pmx_dev *pmx_devs[] = {
#include <asm/irq.h>
#include <plat/shirq.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
/* pad multiplexing support */
/* muxing registers */
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
/* padmux devices to enable */
static struct pmx_dev *pmx_devs[] = {
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
/* Add spear3xx machines common devices here */
/* gpio device registration */
#include <asm/hardware/vic.h>
#include <mach/hardware.h>
-#include <mach/spear.h>
.macro disable_fiq
.endm
#define __MACH_HARDWARE_H
#include <plat/hardware.h>
+#include <mach/spear.h>
/* Vitual to physical translation of statically mapped space */
#define IO_ADDRESS(x) (x | 0xF0000000)
#ifndef __MACH_MISC_REGS_H
#define __MACH_MISC_REGS_H
-#include <mach/spear.h>
+#include <mach/hardware.h>
#define MISC_BASE IOMEM(VA_SPEAR6XX_ICM3_MISC_REG_BASE)
#ifndef __MACH_SPEAR6XX_H
#define __MACH_SPEAR6XX_H
-#include <mach/hardware.h>
#include <mach/spear600.h>
#define SPEAR6XX_ML_SDRAM_BASE 0x00000000
#include <linux/ptrace.h>
#include <asm/irq.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
/* Add spear600 specific devices here */
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
static struct amba_device *amba_devs[] __initdata = {
&gpio_device[0],
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <mach/generic.h>
+#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/spear.h>
/* Add spear6xx machines common devices here */
/* uart device registration */
*/
#include <linux/amba/serial.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
.macro addruart, rp, rv
mov \rp, #SPEAR_DBG_UART_BASE @ Physical base
#include <linux/io.h>
#include <asm/hardware/sp810.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
static inline void arch_idle(void)
{
#include <linux/io.h>
#include <linux/amba/serial.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
#ifndef __PLAT_UNCOMPRESS_H
#define __PLAT_UNCOMPRESS_H
#include <mach/generic.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/spear.h>
/*
* We would use TIMER0 and TIMER1 as clockevent and clocksource.