luci-proto-ncm: adds missing error messages, removes 'dialnumber' option, changes...

This commit:
Adds missing error messages and harmonizes message texts with comgt-ncm script. [1]
Removes option 'dialnumber' not used in comgt-ncm. [1][2]
Fixes option 'delay' according to comgt-ncm script real behavior. (No default value, if parameter is set, then there's always sleep) [1]

[1] https://github.com/openwrt/openwrt/blob/master/package/network/utils/comgt/files/ncm.sh
[2] https://github.com/openwrt/openwrt/blob/master/package/network/utils/comgt/files/ncm.json

Signed-off-by: Anari Jalakas <anari.jalakas@gmail.com>

diff --git a/protocols/luci-proto-ncm/htdocs/luci-static/resources/protocol/ncm.js b/protocols/luci-proto-ncm/htdocs/luci-static/resources/protocol/ncm.js
index 8ff4a1550694b95874c3b0032bfa505da3eeec65..28d65fceb1505f069b52d48cb5296f383b35499a 100644 (file)
--- a/protocols/luci-proto-ncm/htdocs/luci-static/resources/protocol/ncm.js
+++ b/protocols/luci-proto-ncm/htdocs/luci-static/resources/protocol/ncm.js
@@ -18,12 +18,16 @@ var callFileList = rpc.declare({
 });
 
 network.registerPatternVirtual(/^ncm-.+$/);
-network.registerErrorCode('CONFIGURE_FAILED',  _('Configuration failed'));
-network.registerErrorCode('DISCONNECT_FAILED', _('Disconnection attempt failed'));
-network.registerErrorCode('FINALIZE_FAILED',   _('Finalizing failed'));
-network.registerErrorCode('GETINFO_FAILED',    _('Modem information query failed'));
-network.registerErrorCode('INITIALIZE_FAILED', _('Initialization failure'));
-network.registerErrorCode('SETMODE_FAILED',    _('Setting operation mode failed'));
+network.registerErrorCode('CONFIGURE_FAILED', _('Failed to configure modem'));
+network.registerErrorCode('CONNECT_FAILED',  _('Failed to connect'));
+network.registerErrorCode('DISCONNECT_FAILED', _('Failed to disconnect'));
+network.registerErrorCode('FINALIZE_FAILED',  _('Finalizing failed'));
+network.registerErrorCode('GETINFO_FAILED',  _('Failed to get modem information'));
+network.registerErrorCode('INITIALIZE_FAILED', _('Failed to initialize modem'));
+network.registerErrorCode('NO_DEVICE',     _('No control device specified'));
+network.registerErrorCode('NO_IFACE',     _('The interface could not be found'));
+network.registerErrorCode('PIN_FAILED',    _('Unable to verify PIN'));
+network.registerErrorCode('SETMODE_FAILED',  _('Failed to set operating mode'));
 network.registerErrorCode('UNSUPPORTED_MODEM', _('Unsupported modem'));
 
 return network.registerProtocol('ncm', {
@@ -103,9 +107,6 @@ return network.registerProtocol('ncm', {
                o = s.taboption('general', form.Value, 'password', _('PAP/CHAP password'));
                o.password = true;
 
-               o = s.taboption('general', form.Value, 'dialnumber', _('Dial number'));
-               o.placeholder = '*99***1#';
-
                if (L.hasSystemFeature('ipv6')) {
                        o = s.taboption('advanced', form.ListValue, 'ppp_ipv6', _('Obtain IPv6 address'));
                        o.ucioption = 'ipv6';
@@ -115,8 +116,8 @@ return network.registerProtocol('ncm', {
                        o.default = 'auto';
                }
 
-               o = s.taboption('advanced', form.Value, 'delay', _('Modem init timeout'), _('Maximum amount of seconds to wait for the modem to become ready'));
-               o.placeholder = '10';
-               o.datatype    = 'min(1)';
+               o = s.taboption('advanced', form.Value, 'delay', _('Modem init timeout'), _('Amount of seconds to wait for the modem to become ready'));
+               o.placeholder = '0';
+               o.datatype  = 'min(0)';
        }
 });