spin_lock_init(&dev_priv->uncore.lock);
mutex_init(&dev_priv->sb_lock);
- mutex_init(&dev_priv->modeset_restore_lock);
mutex_init(&dev_priv->av_mutex);
mutex_init(&dev_priv->wm.wm_mutex);
mutex_init(&dev_priv->pps_mutex);
struct pci_dev *pdev = dev_priv->drm.pdev;
pci_power_t opregion_target_state;
- /* ignore lid events during suspend */
- mutex_lock(&dev_priv->modeset_restore_lock);
- dev_priv->modeset_restore = MODESET_SUSPENDED;
- mutex_unlock(&dev_priv->modeset_restore_lock);
-
disable_rpm_wakeref_asserts(dev_priv);
/* We do a lot of poking in a lot of registers, make sure they work
intel_fbdev_set_suspend(dev, FBINFO_STATE_RUNNING, false);
- mutex_lock(&dev_priv->modeset_restore_lock);
- dev_priv->modeset_restore = MODESET_DONE;
- mutex_unlock(&dev_priv->modeset_restore_lock);
-
intel_opregion_notify_adapter(dev_priv, PCI_D0);
enable_rpm_wakeref_asserts(dev_priv);
/* Private structure for the integrated LVDS support */
struct intel_lvds_connector {
struct intel_connector base;
-
- struct notifier_block lid_notifier;
};
struct intel_lvds_pps {
return true;
}
-/*
- * Detect the LVDS connection.
- *
- * Since LVDS doesn't have hotlug, we use the lid as a proxy. Open means
- * connected and closed means disconnected. We also send hotplug events as
- * needed, using lid status notification from the input layer.
- */
static enum drm_connector_status
intel_lvds_detect(struct drm_connector *connector, bool force)
{
- struct drm_i915_private *dev_priv = to_i915(connector->dev);
- enum drm_connector_status status;
-
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
- connector->base.id, connector->name);
-
- status = intel_panel_detect(dev_priv);
- if (status != connector_status_unknown)
- return status;
-
return connector_status_connected;
}
return 1;
}
-static int intel_no_modeset_on_lid_dmi_callback(const struct dmi_system_id *id)
-{
- DRM_INFO("Skipping forced modeset for %s\n", id->ident);
- return 1;
-}
-
-/* The GPU hangs up on these systems if modeset is performed on LID open */
-static const struct dmi_system_id intel_no_modeset_on_lid[] = {
- {
- .callback = intel_no_modeset_on_lid_dmi_callback,
- .ident = "Toshiba Tecra A11",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
- DMI_MATCH(DMI_PRODUCT_NAME, "TECRA A11"),
- },
- },
-
- { } /* terminating entry */
-};
-
-/*
- * Lid events. Note the use of 'modeset':
- * - we set it to MODESET_ON_LID_OPEN on lid close,
- * and set it to MODESET_DONE on open
- * - we use it as a "only once" bit (ie we ignore
- * duplicate events where it was already properly set)
- * - the suspend/resume paths will set it to
- * MODESET_SUSPENDED and ignore the lid open event,
- * because they restore the mode ("lid open").
- */
-static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
- void *unused)
-{
- struct intel_lvds_connector *lvds_connector =
- container_of(nb, struct intel_lvds_connector, lid_notifier);
- struct drm_connector *connector = &lvds_connector->base.base;
- struct drm_device *dev = connector->dev;
- struct drm_i915_private *dev_priv = to_i915(dev);
-
- if (dev->switch_power_state != DRM_SWITCH_POWER_ON)
- return NOTIFY_OK;
-
- mutex_lock(&dev_priv->modeset_restore_lock);
- if (dev_priv->modeset_restore == MODESET_SUSPENDED)
- goto exit;
- /*
- * check and update the status of LVDS connector after receiving
- * the LID nofication event.
- */
- connector->status = connector->funcs->detect(connector, false);
-
- /* Don't force modeset on machines where it causes a GPU lockup */
- if (dmi_check_system(intel_no_modeset_on_lid))
- goto exit;
- if (!acpi_lid_open()) {
- /* do modeset on next lid open event */
- dev_priv->modeset_restore = MODESET_ON_LID_OPEN;
- goto exit;
- }
-
- if (dev_priv->modeset_restore == MODESET_DONE)
- goto exit;
-
- /*
- * Some old platform's BIOS love to wreak havoc while the lid is closed.
- * We try to detect this here and undo any damage. The split for PCH
- * platforms is rather conservative and a bit arbitrary expect that on
- * those platforms VGA disabling requires actual legacy VGA I/O access,
- * and as part of the cleanup in the hw state restore we also redisable
- * the vga plane.
- */
- if (!HAS_PCH_SPLIT(dev_priv))
- intel_display_resume(dev);
-
- dev_priv->modeset_restore = MODESET_DONE;
-
-exit:
- mutex_unlock(&dev_priv->modeset_restore_lock);
- return NOTIFY_OK;
-}
-
-static int
-intel_lvds_connector_register(struct drm_connector *connector)
-{
- struct intel_lvds_connector *lvds = to_lvds_connector(connector);
- int ret;
-
- ret = intel_connector_register(connector);
- if (ret)
- return ret;
-
- lvds->lid_notifier.notifier_call = intel_lid_notify;
- if (acpi_lid_notifier_register(&lvds->lid_notifier)) {
- DRM_DEBUG_KMS("lid notifier registration failed\n");
- lvds->lid_notifier.notifier_call = NULL;
- }
-
- return 0;
-}
-
-static void
-intel_lvds_connector_unregister(struct drm_connector *connector)
-{
- struct intel_lvds_connector *lvds = to_lvds_connector(connector);
-
- if (lvds->lid_notifier.notifier_call)
- acpi_lid_notifier_unregister(&lvds->lid_notifier);
-
- intel_connector_unregister(connector);
-}
-
/**
* intel_lvds_destroy - unregister and free LVDS structures
* @connector: connector to free
.fill_modes = drm_helper_probe_single_connector_modes,
.atomic_get_property = intel_digital_connector_atomic_get_property,
.atomic_set_property = intel_digital_connector_atomic_set_property,
- .late_register = intel_lvds_connector_register,
- .early_unregister = intel_lvds_connector_unregister,
+ .late_register = intel_connector_register,
+ .early_unregister = intel_connector_unregister,
.destroy = intel_lvds_destroy,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
.atomic_duplicate_state = intel_digital_connector_duplicate_state,
* 2) check for VBT data
* 3) check to see if LVDS is already on
* if none of the above, no panel
- * 4) make sure lid is open
- * if closed, act like it's not there for now
*/
/*
projects / openwrt / staging / blogic.git / commitdiff