sata_promise: simplify port setup

Each place in pdc_ata_init_one() that initialises a SATA
port first calls pdc_ata_setup_port(), and then manually
assigns the port's ->scr_addr. Simplify the code by extending
pdc_ata_setup_port() to also handle scr_addr initialisation;
for PATA ports we pass NULL as scr_addr.

The initialisation of the PATA-only 20619 redundantly set
up scr_addr for the ports. Remove this.

Tested on 20619, 20575, and 20775 chips.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 5940bf403751ff9ef1c247c862434cac27fc9cb7..44e0fc7471f251e04ffd4263341099e416dcd0a9 100644 (file)
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -777,7 +777,8 @@ static int pdc_old_check_atapi_dma(struct ata_queued_cmd *qc)
        return pdc_check_atapi_dma(qc);
 }
 
-static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base)
+static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base,
+                              void __iomem *scr_addr)
 {
        port->cmd_addr          = base;
        port->data_addr         = base;
@@ -792,6 +793,7 @@ static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base)
        port->status_addr       = base + 0x1c;
        port->altstatus_addr    =
        port->ctl_addr          = base + 0x38;
+       port->scr_addr          = scr_addr;
 }
 
 
@@ -904,11 +906,8 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 
        base = probe_ent->iomap[PDC_MMIO_BAR];
 
-       pdc_ata_setup_port(&probe_ent->port[0], base + 0x200);
-       pdc_ata_setup_port(&probe_ent->port[1], base + 0x280);
-
-       probe_ent->port[0].scr_addr = base + 0x400;
-       probe_ent->port[1].scr_addr = base + 0x500;
+       pdc_ata_setup_port(&probe_ent->port[0], base + 0x200, base + 0x400);
+       pdc_ata_setup_port(&probe_ent->port[1], base + 0x280, base + 0x500);
 
        /* notice 4-port boards */
        switch (board_idx) {
@@ -917,12 +916,8 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
                /* Fall through */
        case board_20319:
                        probe_ent->n_ports = 4;
-
-               pdc_ata_setup_port(&probe_ent->port[2], base + 0x300);
-               pdc_ata_setup_port(&probe_ent->port[3], base + 0x380);
-
-               probe_ent->port[2].scr_addr = base + 0x600;
-               probe_ent->port[3].scr_addr = base + 0x700;
+               pdc_ata_setup_port(&probe_ent->port[2], base + 0x300, base + 0x600);
+               pdc_ata_setup_port(&probe_ent->port[3], base + 0x380, base + 0x700);
                break;
        case board_2057x:
                hp->flags |= PDC_FLAG_GEN_II;
@@ -932,7 +927,7 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
                tmp = readb(base + PDC_FLASH_CTL+1);
                if (!(tmp & 0x80)) {
                        probe_ent->n_ports = 3;
-                       pdc_ata_setup_port(&probe_ent->port[2], base + 0x300);
+                       pdc_ata_setup_port(&probe_ent->port[2], base + 0x300, NULL);
                        hp->port_flags[2] = ATA_FLAG_SLAVE_POSS;
                        printk(KERN_INFO DRV_NAME " PATA port found\n");
                } else
@@ -942,12 +937,8 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
                break;
        case board_20619:
                probe_ent->n_ports = 4;
-
-               pdc_ata_setup_port(&probe_ent->port[2], base + 0x300);
-               pdc_ata_setup_port(&probe_ent->port[3], base + 0x380);
-
-               probe_ent->port[2].scr_addr = base + 0x600;
-               probe_ent->port[3].scr_addr = base + 0x700;
+               pdc_ata_setup_port(&probe_ent->port[2], base + 0x300, NULL);
+               pdc_ata_setup_port(&probe_ent->port[3], base + 0x380, NULL);
                break;
        default:
                BUG();