.portb = CX23885_MPEG_DVB,
.portc = CX23885_MPEG_DVB,
},
+ [CX23885_BOARD_LEADTEK_WINFAST_PXTV1200] = {
+ .name = "LEADTEK WinFast PxTV1200",
+ .porta = CX23885_ANALOG_VIDEO,
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0x61,
+ .input = {{
+ .type = CX23885_VMUX_TELEVISION,
+ .vmux = CX25840_VIN2_CH1 |
+ CX25840_VIN5_CH2 |
+ CX25840_NONE0_CH3,
+ }, {
+ .type = CX23885_VMUX_COMPOSITE1,
+ .vmux = CX25840_COMPOSITE1,
+ }, {
+ .type = CX23885_VMUX_SVIDEO,
+ .vmux = CX25840_SVIDEO_LUMA3 |
+ CX25840_SVIDEO_CHROMA4,
+ }, {
+ .type = CX23885_VMUX_COMPONENT,
+ .vmux = CX25840_VIN7_CH1 |
+ CX25840_VIN6_CH2 |
+ CX25840_VIN8_CH3 |
+ CX25840_COMPONENT_ON,
+ } },
+ },
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
.subvendor = 0x14f1,
.subdevice = 0x8578,
.card = CX23885_BOARD_MYGICA_X8558PRO,
+ }, {
+ .subvendor = 0x107d,
+ .subdevice = 0x6f22,
+ .card = CX23885_BOARD_LEADTEK_WINFAST_PXTV1200,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
+ case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
/* Tuner Reset Command */
bitmask = 0x04;
break;
case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
+ case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
/* GPIO-2 xc3028 tuner reset */
/* The following GPIO's are on the internal AVCore (cx25840) */
case CX23885_BOARD_MYGICA_X8506:
case CX23885_BOARD_MAGICPRO_PROHDTVE2:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
+ case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[2].i2c_adap,
"cx25840", "cx25840", 0x88 >> 1, NULL);
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
#include "cx23885-ioctl.h"
+#include "tuner-xc2028.h"
MODULE_DESCRIPTION("v4l2 driver module for cx23885 based TV cards");
MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
tun_setup.tuner_callback = cx23885_tuner_callback;
v4l2_subdev_call(sd, tuner, s_type_addr, &tun_setup);
+
+ if (dev->board == CX23885_BOARD_LEADTEK_WINFAST_PXTV1200) {
+ struct xc2028_ctrl ctrl = {
+ .fname = XC2028_DEFAULT_FIRMWARE,
+ .max_len = 64
+ };
+ struct v4l2_priv_tun_config cfg = {
+ .tuner = dev->tuner_type,
+ .priv = &ctrl
+ };
+ v4l2_subdev_call(sd, tuner, s_config, &cfg);
+ }
}
}