core-$(CONFIG_M68EZ328) += arch/m68k/platform/68EZ328/
core-$(CONFIG_M68VZ328) += arch/m68k/platform/68VZ328/
core-$(CONFIG_COLDFIRE) += arch/m68k/platform/coldfire/
-core-$(CONFIG_M5307) += arch/m68k/platform/5307/
core-$(CONFIG_M532x) += arch/m68k/platform/532x/
core-$(CONFIG_M5407) += arch/m68k/platform/5407/
core-$(CONFIG_M54xx) += arch/m68k/platform/54xx/
+++ /dev/null
-#
-# Makefile for the m68knommu kernel.
-#
-
-#
-# If you want to play with the HW breakpoints then you will
-# need to add define this, which will give you a stack backtrace
-# on the console port whenever a DBG interrupt occurs. You have to
-# set up you HW breakpoints to trigger a DBG interrupt:
-#
-# ccflags-y := -DTRAP_DBG_INTERRUPT
-# asflags-y := -DTRAP_DBG_INTERRUPT
-#
-
-asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
-
-obj-y += config.o
-obj-$(CONFIG_NETtel) += nettel.o
-obj-$(CONFIG_CLEOPATRA) += nettel.o
-
+++ /dev/null
-/***************************************************************************/
-
-/*
- * linux/arch/m68knommu/platform/5307/config.c
- *
- * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
- * Copyright (C) 2000, Lineo (www.lineo.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-#include <asm/mcfwdebug.h>
-
-/***************************************************************************/
-
-/*
- * Some platforms need software versions of the GPIO data registers.
- */
-unsigned short ppdata;
-unsigned char ledbank = 0xff;
-
-/***************************************************************************/
-
-struct mcf_gpio_chip mcf_gpio_chips[] = {
- MCFGPS(PP, 0, 16, MCFSIM_PADDR, MCFSIM_PADAT, MCFSIM_PADAT),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
-
-/***************************************************************************/
-
-void __init config_BSP(char *commandp, int size)
-{
-#if defined(CONFIG_NETtel) || \
- defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
- /* Copy command line from FLASH to local buffer... */
- memcpy(commandp, (char *) 0xf0004000, size);
- commandp[size-1] = 0;
-#endif
-
- mach_sched_init = hw_timer_init;
-
- /* Only support the external interrupts on their primary level */
- mcf_mapirq2imr(25, MCFINTC_EINT1);
- mcf_mapirq2imr(27, MCFINTC_EINT3);
- mcf_mapirq2imr(29, MCFINTC_EINT5);
- mcf_mapirq2imr(31, MCFINTC_EINT7);
-
-#ifdef CONFIG_BDM_DISABLE
- /*
- * Disable the BDM clocking. This also turns off most of the rest of
- * the BDM device. This is good for EMC reasons. This option is not
- * incompatible with the memory protection option.
- */
- wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK);
-#endif
-}
-
-/***************************************************************************/
+++ /dev/null
-/***************************************************************************/
-
-/*
- * nettel.c -- startup code support for the NETtel boards
- *
- * Copyright (C) 2009, Greg Ungerer (gerg@snapgear.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/nettel.h>
-
-/***************************************************************************/
-
-/*
- * Define the IO and interrupt resources of the 2 SMC9196 interfaces.
- */
-#define NETTEL_SMC0_ADDR 0x30600300
-#define NETTEL_SMC0_IRQ 29
-
-#define NETTEL_SMC1_ADDR 0x30600000
-#define NETTEL_SMC1_IRQ 27
-
-/*
- * We need some access into the SMC9196 registers. Define those registers
- * we will need here (including the smc91x.h doesn't seem to give us these
- * in a simple form).
- */
-#define SMC91xx_BANKSELECT 14
-#define SMC91xx_BASEADDR 2
-#define SMC91xx_BASEMAC 4
-
-/***************************************************************************/
-
-static struct resource nettel_smc91x_0_resources[] = {
- {
- .start = NETTEL_SMC0_ADDR,
- .end = NETTEL_SMC0_ADDR + 0x20,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = NETTEL_SMC0_IRQ,
- .end = NETTEL_SMC0_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource nettel_smc91x_1_resources[] = {
- {
- .start = NETTEL_SMC1_ADDR,
- .end = NETTEL_SMC1_ADDR + 0x20,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = NETTEL_SMC1_IRQ,
- .end = NETTEL_SMC1_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device nettel_smc91x[] = {
- {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(nettel_smc91x_0_resources),
- .resource = nettel_smc91x_0_resources,
- },
- {
- .name = "smc91x",
- .id = 1,
- .num_resources = ARRAY_SIZE(nettel_smc91x_1_resources),
- .resource = nettel_smc91x_1_resources,
- },
-};
-
-static struct platform_device *nettel_devices[] __initdata = {
- &nettel_smc91x[0],
- &nettel_smc91x[1],
-};
-
-/***************************************************************************/
-
-static u8 nettel_macdefault[] __initdata = {
- 0x00, 0xd0, 0xcf, 0x00, 0x00, 0x01,
-};
-
-/*
- * Set flash contained MAC address into SMC9196 core. Make sure the flash
- * MAC address is sane, and not an empty flash. If no good use the Moreton
- * Bay default MAC address instead.
- */
-
-static void __init nettel_smc91x_setmac(unsigned int ioaddr, unsigned int flashaddr)
-{
- u16 *macp;
-
- macp = (u16 *) flashaddr;
- if ((macp[0] == 0xffff) && (macp[1] == 0xffff) && (macp[2] == 0xffff))
- macp = (u16 *) &nettel_macdefault[0];
-
- writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT);
- writew(macp[0], ioaddr + SMC91xx_BASEMAC);
- writew(macp[1], ioaddr + SMC91xx_BASEMAC + 2);
- writew(macp[2], ioaddr + SMC91xx_BASEMAC + 4);
-}
-
-/***************************************************************************/
-
-/*
- * Re-map the address space of at least one of the SMC ethernet
- * parts. Both parts power up decoding the same address, so we
- * need to move one of them first, before doing anything else.
- */
-
-static void __init nettel_smc91x_init(void)
-{
- writew(0x00ec, MCF_MBAR + MCFSIM_PADDR);
- mcf_setppdata(0, 0x0080);
- writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT);
- writew(0x0067, NETTEL_SMC0_ADDR + SMC91xx_BASEADDR);
- mcf_setppdata(0x0080, 0);
-
- /* Set correct chip select timing for SMC9196 accesses */
- writew(0x1180, MCF_MBAR + MCFSIM_CSCR3);
-
- /* Set the SMC interrupts to be auto-vectored */
- mcf_autovector(NETTEL_SMC0_IRQ);
- mcf_autovector(NETTEL_SMC1_IRQ);
-
- /* Set MAC addresses from flash for both interfaces */
- nettel_smc91x_setmac(NETTEL_SMC0_ADDR, 0xf0006000);
- nettel_smc91x_setmac(NETTEL_SMC1_ADDR, 0xf0006006);
-}
-
-/***************************************************************************/
-
-static int __init init_nettel(void)
-{
- nettel_smc91x_init();
- platform_add_devices(nettel_devices, ARRAY_SIZE(nettel_devices));
- return 0;
-}
-
-arch_initcall(init_nettel);
-
-/***************************************************************************/
obj-$(CONFIG_M527x) += m527x.o pit.o intc-2.o reset.o
obj-$(CONFIG_M5272) += m5272.o intc-5272.o timers.o
obj-$(CONFIG_M528x) += m528x.o pit.o intc-2.o reset.o
-obj-$(CONFIG_M5307) += timers.o intc.o reset.o
+obj-$(CONFIG_M5307) += m5307.o timers.o intc.o reset.o
obj-$(CONFIG_M532x) += timers.o intc-simr.o reset.o
obj-$(CONFIG_M5407) += timers.o intc.o reset.o
obj-$(CONFIG_M54xx) += sltimers.o intc-2.o
+obj-$(CONFIG_NETtel) += nettel.o
+obj-$(CONFIG_CLEOPATRA) += nettel.o
+
obj-y += pinmux.o gpio.o
extra-y := head.o
--- /dev/null
+/***************************************************************************/
+
+/*
+ * linux/arch/m68knommu/platform/5307/config.c
+ *
+ * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 2000, Lineo (www.lineo.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+#include <asm/mcfwdebug.h>
+
+/***************************************************************************/
+
+/*
+ * Some platforms need software versions of the GPIO data registers.
+ */
+unsigned short ppdata;
+unsigned char ledbank = 0xff;
+
+/***************************************************************************/
+
+struct mcf_gpio_chip mcf_gpio_chips[] = {
+ MCFGPS(PP, 0, 16, MCFSIM_PADDR, MCFSIM_PADAT, MCFSIM_PADAT),
+};
+
+unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+#if defined(CONFIG_NETtel) || \
+ defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
+ /* Copy command line from FLASH to local buffer... */
+ memcpy(commandp, (char *) 0xf0004000, size);
+ commandp[size-1] = 0;
+#endif
+
+ mach_sched_init = hw_timer_init;
+
+ /* Only support the external interrupts on their primary level */
+ mcf_mapirq2imr(25, MCFINTC_EINT1);
+ mcf_mapirq2imr(27, MCFINTC_EINT3);
+ mcf_mapirq2imr(29, MCFINTC_EINT5);
+ mcf_mapirq2imr(31, MCFINTC_EINT7);
+
+#ifdef CONFIG_BDM_DISABLE
+ /*
+ * Disable the BDM clocking. This also turns off most of the rest of
+ * the BDM device. This is good for EMC reasons. This option is not
+ * incompatible with the memory protection option.
+ */
+ wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK);
+#endif
+}
+
+/***************************************************************************/
--- /dev/null
+/***************************************************************************/
+
+/*
+ * nettel.c -- startup code support for the NETtel boards
+ *
+ * Copyright (C) 2009, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/nettel.h>
+
+/***************************************************************************/
+
+/*
+ * Define the IO and interrupt resources of the 2 SMC9196 interfaces.
+ */
+#define NETTEL_SMC0_ADDR 0x30600300
+#define NETTEL_SMC0_IRQ 29
+
+#define NETTEL_SMC1_ADDR 0x30600000
+#define NETTEL_SMC1_IRQ 27
+
+/*
+ * We need some access into the SMC9196 registers. Define those registers
+ * we will need here (including the smc91x.h doesn't seem to give us these
+ * in a simple form).
+ */
+#define SMC91xx_BANKSELECT 14
+#define SMC91xx_BASEADDR 2
+#define SMC91xx_BASEMAC 4
+
+/***************************************************************************/
+
+static struct resource nettel_smc91x_0_resources[] = {
+ {
+ .start = NETTEL_SMC0_ADDR,
+ .end = NETTEL_SMC0_ADDR + 0x20,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = NETTEL_SMC0_IRQ,
+ .end = NETTEL_SMC0_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource nettel_smc91x_1_resources[] = {
+ {
+ .start = NETTEL_SMC1_ADDR,
+ .end = NETTEL_SMC1_ADDR + 0x20,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = NETTEL_SMC1_IRQ,
+ .end = NETTEL_SMC1_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device nettel_smc91x[] = {
+ {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(nettel_smc91x_0_resources),
+ .resource = nettel_smc91x_0_resources,
+ },
+ {
+ .name = "smc91x",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(nettel_smc91x_1_resources),
+ .resource = nettel_smc91x_1_resources,
+ },
+};
+
+static struct platform_device *nettel_devices[] __initdata = {
+ &nettel_smc91x[0],
+ &nettel_smc91x[1],
+};
+
+/***************************************************************************/
+
+static u8 nettel_macdefault[] __initdata = {
+ 0x00, 0xd0, 0xcf, 0x00, 0x00, 0x01,
+};
+
+/*
+ * Set flash contained MAC address into SMC9196 core. Make sure the flash
+ * MAC address is sane, and not an empty flash. If no good use the Moreton
+ * Bay default MAC address instead.
+ */
+
+static void __init nettel_smc91x_setmac(unsigned int ioaddr, unsigned int flashaddr)
+{
+ u16 *macp;
+
+ macp = (u16 *) flashaddr;
+ if ((macp[0] == 0xffff) && (macp[1] == 0xffff) && (macp[2] == 0xffff))
+ macp = (u16 *) &nettel_macdefault[0];
+
+ writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT);
+ writew(macp[0], ioaddr + SMC91xx_BASEMAC);
+ writew(macp[1], ioaddr + SMC91xx_BASEMAC + 2);
+ writew(macp[2], ioaddr + SMC91xx_BASEMAC + 4);
+}
+
+/***************************************************************************/
+
+/*
+ * Re-map the address space of at least one of the SMC ethernet
+ * parts. Both parts power up decoding the same address, so we
+ * need to move one of them first, before doing anything else.
+ */
+
+static void __init nettel_smc91x_init(void)
+{
+ writew(0x00ec, MCF_MBAR + MCFSIM_PADDR);
+ mcf_setppdata(0, 0x0080);
+ writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT);
+ writew(0x0067, NETTEL_SMC0_ADDR + SMC91xx_BASEADDR);
+ mcf_setppdata(0x0080, 0);
+
+ /* Set correct chip select timing for SMC9196 accesses */
+ writew(0x1180, MCF_MBAR + MCFSIM_CSCR3);
+
+ /* Set the SMC interrupts to be auto-vectored */
+ mcf_autovector(NETTEL_SMC0_IRQ);
+ mcf_autovector(NETTEL_SMC1_IRQ);
+
+ /* Set MAC addresses from flash for both interfaces */
+ nettel_smc91x_setmac(NETTEL_SMC0_ADDR, 0xf0006000);
+ nettel_smc91x_setmac(NETTEL_SMC1_ADDR, 0xf0006006);
+}
+
+/***************************************************************************/
+
+static int __init init_nettel(void)
+{
+ nettel_smc91x_init();
+ platform_add_devices(nettel_devices, ARRAY_SIZE(nettel_devices));
+ return 0;
+}
+
+arch_initcall(init_nettel);
+
+/***************************************************************************/
projects / openwrt / staging / blogic.git / commitdiff