SUBTARGETS:=cortexa8 cortexa7 cortexa53
KERNEL_PATCHVER:=6.1
+KERNEL_TESTING_PATCHVER:=6.6
KERNELNAME:=zImage dtbs
--- /dev/null
+# CONFIG_AHCI_SUNXI is not set
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_ARCH_32BIT_OFF_T=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_ARCH_FORCE_MAX_ORDER=11
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_KEEP_MEMBLOCK=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MULTIPLATFORM=y
+CONFIG_ARCH_MULTI_V6_V7=y
+CONFIG_ARCH_MULTI_V7=y
+CONFIG_ARCH_NR_GPIO=416
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_ARCH_SUNXI_MC_SMP=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARM=y
+CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_ARM_CCI=y
+CONFIG_ARM_CCI400_COMMON=y
+CONFIG_ARM_CCI400_PORT_CTRL=y
+CONFIG_ARM_CPU_SUSPEND=y
+CONFIG_ARM_CRYPTO=y
+CONFIG_ARM_ERRATA_643719=y
+CONFIG_ARM_GIC=y
+CONFIG_ARM_HAS_SG_CHAIN=y
+CONFIG_ARM_HEAVY_MB=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_ARM_LPAE=y
+CONFIG_ARM_PATCH_IDIV=y
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_ARM_PSCI=y
+CONFIG_ARM_PSCI_FW=y
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_UNWIND=y
+CONFIG_ARM_VIRT_EXT=y
+CONFIG_ATA=y
+CONFIG_ATAGS=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_AXP20X_POWER=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_PM=y
+CONFIG_BOUNCE=y
+CONFIG_CACHE_L2X0=y
+CONFIG_CAN=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLK_SUNXI=y
+CONFIG_CLK_SUNXI_CLOCKS=y
+CONFIG_CLK_SUNXI_PRCM_SUN6I=y
+CONFIG_CLK_SUNXI_PRCM_SUN8I=y
+CONFIG_CLK_SUNXI_PRCM_SUN9I=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_COMMON_CLK=y
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_CONNECTOR=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_COREDUMP=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPUFREQ_DT_PLATDEV=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_ATTR_SET=y
+CONFIG_CPU_FREQ_GOV_COMMON=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_RMAP=y
+CONFIG_CPU_SPECTRE=y
+CONFIG_CPU_THERMAL=y
+CONFIG_CPU_THUMB_CAPABLE=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_V7=y
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRYPTO_CRC32=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRCT10DIF=y
+CONFIG_CRYPTO_CRCT10DIF_ARM_CE=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_DEV_ALLWINNER=y
+CONFIG_CRYPTO_DEV_SUN4I_SS=y
+# CONFIG_CRYPTO_DEV_SUN4I_SS_DEBUG is not set
+CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG=y
+# CONFIG_CRYPTO_DEV_SUN8I_CE is not set
+# CONFIG_CRYPTO_DEV_SUN8I_SS is not set
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_LIB_DES=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_OF=y
+CONFIG_DMA_OPS=y
+CONFIG_DMA_REMAP=y
+CONFIG_DMA_SUN4I=y
+CONFIG_DMA_SUN6I=y
+CONFIG_DMA_VIRTUAL_CHANNELS=y
+CONFIG_DNOTIFY=y
+CONFIG_DTC=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_DVB_CORE=y
+CONFIG_DWMAC_GENERIC=y
+# CONFIG_DWMAC_SUN8I is not set
+CONFIG_DWMAC_SUNXI=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_ELF_CORE=y
+CONFIG_EXT4_FS=y
+CONFIG_EXTCON=y
+CONFIG_F2FS_FS=y
+CONFIG_FAT_FS=y
+CONFIG_FB=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_CMDLINE=y
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_LITTLE_ENDIAN=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_SIMPLE=y
+CONFIG_FB_TILEBLITTING=y
+CONFIG_FIXED_PHY=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FONT_8x16=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_SUPPORT=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FRAME_WARN=2048
+CONFIG_FREEZER=y
+CONFIG_FS_IOMAP=y
+CONFIG_FS_MBCACHE=y
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FWNODE_MDIO=y
+CONFIG_FW_CACHE=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ARCH_TOPOLOGY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_CPU_VULNERABILITIES=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_GETTIMEOFDAY=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_MIGRATION=y
+CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_PINCTRL_GROUPS=y
+CONFIG_GENERIC_PINMUX_FUNCTIONS=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_VDSO_32=y
+CONFIG_GLOB=y
+CONFIG_GPIO_CDEV=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDEN_BRANCH_PREDICTOR=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HAVE_SMP=y
+CONFIG_HIGHMEM=y
+CONFIG_HIGHPTE=y
+CONFIG_HOTPLUG_CPU=y
+CONFIG_HWMON=y
+CONFIG_HW_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=y
+CONFIG_HZ_FIXED=0
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_MV64XXX=y
+CONFIG_I2C_SUN6I_P2WI=y
+CONFIG_IIO=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INPUT=y
+CONFIG_INPUT_AXP20X_PEK=y
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_JBD2=y
+CONFIG_KALLSYMS=y
+CONFIG_KEYBOARD_SUN4I_LRADC=y
+CONFIG_KMAP_LOCAL=y
+CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y
+CONFIG_KSM=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_PLATFORM=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LIBFDT=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_MACH_SUN4I=y
+CONFIG_MACH_SUN5I=y
+CONFIG_MACH_SUN6I=y
+CONFIG_MACH_SUN7I=y
+CONFIG_MACH_SUN8I=y
+CONFIG_MACH_SUN9I=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MDIO_DEVRES=y
+CONFIG_MDIO_SUN4I=y
+CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
+CONFIG_MEDIA_PLATFORM_SUPPORT=y
+CONFIG_MEDIA_RADIO_SUPPORT=y
+CONFIG_MEDIA_SDR_SUPPORT=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_TEST_SUPPORT=y
+CONFIG_MEDIA_TUNER=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MFD_AXP20X=y
+CONFIG_MFD_AXP20X_I2C=y
+CONFIG_MFD_AXP20X_RSB=y
+CONFIG_MFD_CORE=y
+CONFIG_MFD_SUN6I_PRCM=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_MIGRATION=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_SUNXI=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPLIT_FIT_FW=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEON=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NET_PTP_CLASSIFY=y
+CONFIG_NET_SELFTESTS=y
+CONFIG_NET_VENDOR_ALLWINNER=y
+CONFIG_NLS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NO_HZ=y
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NR_CPUS=8
+CONFIG_NVMEM=y
+CONFIG_NVMEM_SUNXI_SID=y
+CONFIG_NVMEM_SYSFS=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+CONFIG_PADATA=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PAGE_POOL=y
+CONFIG_PCS_XPCS=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=3
+CONFIG_PHYLIB=y
+CONFIG_PHYLINK=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_PHY_SUN4I_USB=y
+# CONFIG_PHY_SUN50I_USB3 is not set
+# CONFIG_PHY_SUN6I_MIPI_DPHY is not set
+CONFIG_PHY_SUN9I_USB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AXP209=y
+# CONFIG_PINCTRL_SUN20I_D1 is not set
+CONFIG_PINCTRL_SUN4I_A10=y
+# CONFIG_PINCTRL_SUN50I_A100 is not set
+# CONFIG_PINCTRL_SUN50I_A100_R is not set
+# CONFIG_PINCTRL_SUN50I_A64 is not set
+# CONFIG_PINCTRL_SUN50I_A64_R is not set
+# CONFIG_PINCTRL_SUN50I_H5 is not set
+# CONFIG_PINCTRL_SUN50I_H6 is not set
+# CONFIG_PINCTRL_SUN50I_H616 is not set
+# CONFIG_PINCTRL_SUN50I_H616_R is not set
+# CONFIG_PINCTRL_SUN50I_H6_R is not set
+CONFIG_PINCTRL_SUN5I=y
+CONFIG_PINCTRL_SUN6I_A31=y
+CONFIG_PINCTRL_SUN6I_A31_R=y
+CONFIG_PINCTRL_SUN8I_A23=y
+CONFIG_PINCTRL_SUN8I_A23_R=y
+CONFIG_PINCTRL_SUN8I_A33=y
+CONFIG_PINCTRL_SUN8I_A83T=y
+CONFIG_PINCTRL_SUN8I_A83T_R=y
+CONFIG_PINCTRL_SUN8I_H3=y
+CONFIG_PINCTRL_SUN8I_H3_R=y
+CONFIG_PINCTRL_SUN8I_V3S=y
+CONFIG_PINCTRL_SUN9I_A80=y
+CONFIG_PINCTRL_SUN9I_A80_R=y
+CONFIG_PINCTRL_SUNXI=y
+CONFIG_PM=y
+CONFIG_PM_CLK=y
+CONFIG_PM_OPP=y
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_PPS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_PROC_EVENTS=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_PTP_1588_CLOCK=y
+CONFIG_PTP_1588_CLOCK_OPTIONAL=y
+CONFIG_PWM=y
+CONFIG_PWM_SUN4I=y
+CONFIG_PWM_SYSFS=y
+CONFIG_RATIONAL=y
+CONFIG_REALTEK_PHY=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_IRQ=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGMAP_SPI=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_AXP20X=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_SY8106A=y
+CONFIG_RELAY=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RESET_SIMPLE=y
+CONFIG_RESET_SUNXI=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_SATA_HOST=y
+CONFIG_SATA_PMP=y
+CONFIG_SCSI=y
+CONFIG_SCSI_COMMON=y
+CONFIG_SDIO_UART=y
+CONFIG_SECURITYFS=y
+CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_8250_DWLIB=y
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=8
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SG_POOL=y
+CONFIG_SMP=y
+CONFIG_SMP_ON_UP=y
+CONFIG_SND=y
+CONFIG_SND_COMPRESS_OFFLOAD=y
+CONFIG_SND_JACK=y
+CONFIG_SND_JACK_INPUT_DEV=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SIMPLE_CARD=y
+CONFIG_SND_SIMPLE_CARD_UTILS=y
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SUN4I_I2S is not set
+# CONFIG_SND_SUN4I_SPDIF is not set
+# CONFIG_SND_SUN50I_DMIC is not set
+# CONFIG_SND_SUN8I_CODEC is not set
+# CONFIG_SND_SUN8I_CODEC_ANALOG is not set
+CONFIG_SOCK_RX_QUEUE_MAPPING=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MEM=y
+CONFIG_SPI_SUN4I=y
+CONFIG_SPI_SUN6I=y
+CONFIG_SRCU=y
+CONFIG_STMMAC_ETH=y
+CONFIG_STMMAC_PLATFORM=y
+CONFIG_SUN4I_A10_CCU=y
+# CONFIG_SUN4I_EMAC is not set
+CONFIG_SUN4I_TIMER=y
+CONFIG_SUN5I_CCU=y
+CONFIG_SUN5I_HSTIMER=y
+CONFIG_SUN6I_A31_CCU=y
+# CONFIG_SUN6I_RTC_CCU is not set
+CONFIG_SUN8I_A23_CCU=y
+CONFIG_SUN8I_A33_CCU=y
+CONFIG_SUN8I_A83T_CCU=y
+CONFIG_SUN8I_DE2_CCU=y
+CONFIG_SUN8I_H3_CCU=y
+CONFIG_SUN8I_R40_CCU=y
+CONFIG_SUN8I_R_CCU=y
+CONFIG_SUN8I_THERMAL=y
+CONFIG_SUN8I_V3S_CCU=y
+CONFIG_SUN9I_A80_CCU=y
+CONFIG_SUNXI_CCU=y
+CONFIG_SUNXI_MBUS=y
+CONFIG_SUNXI_RSB=y
+CONFIG_SUNXI_SRAM=y
+CONFIG_SUNXI_WATCHDOG=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_SWIOTLB=y
+CONFIG_SWPHY=y
+CONFIG_SWP_EMULATE=y
+CONFIG_SYSFS_SYSCALL=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_THERMAL=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL_OF=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TOUCHSCREEN_SUN4I=y
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_UNWINDER_ARM=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_DWC2_HOST=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_NET_DRIVERS=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_ROLE_SWITCH=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USERIO=y
+CONFIG_USE_OF=y
+CONFIG_VFAT_FS=y
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_VHOST=y
+CONFIG_VHOST_IOTLB=y
+CONFIG_VHOST_NET=y
+# CONFIG_VIDEO_SUN4I_CSI is not set
+# CONFIG_VIDEO_SUN6I_CSI is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_XPS=y
+CONFIG_XXHASH=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_ZBOOT_ROM_TEXT=0
--- /dev/null
+From a896bc1d79e3c00f0aacfe225499d811775616f3 Mon Sep 17 00:00:00 2001
+From: Chukun Pan <amadeus@jmu.edu.cn>
+Date: Sun, 10 Oct 2021 21:50:17 +0800
+Subject: [PATCH] arm64: allwinner: add OF node for USB eth on NanoPi R1S H5
+
+This adds the OF node for the USB3 ethernet adapter on the FriendlyARM
+NanoPi R1S H5. Add the correct value for the RTL8153 LED configuration
+register to match the blink behavior of the other port on the device.
+
+Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
+@@ -116,6 +116,13 @@
+
+ &ehci1 {
+ status = "okay";
++
++ usb-eth@1 {
++ compatible = "realtek,rtl8153";
++ reg = <1>;
++
++ realtek,led-data = <0x78>;
++ };
+ };
+
+ &ehci2 {
--- /dev/null
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
+@@ -59,7 +59,7 @@
+
+ key-sw4 {
+ label = "sw4";
+- linux,code = <BTN_0>;
++ linux,code = <KEY_POWER>;
+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+@@ -220,7 +220,7 @@
+ };
+
+ &usb_otg {
+- dr_mode = "otg";
++ dr_mode = "host";
+ status = "okay";
+ };
+
--- /dev/null
+From 7d87d3dafc4b1ea5659eb71ee6c5fd5308490d1f Mon Sep 17 00:00:00 2001
+From: Oskari Lemmela <oskari@lemmela.net>
+Date: Mon, 31 Dec 2018 07:44:49 +0200
+Subject: [PATCH] arm64: allwinner: a64-sopine: Add Sopine flash partitions.
+
+First 896kB to u-boot. Enough space for SPL, u-boot and ATF.
+Next 128kB to u-boot environment and rest to firmware.
+
+Firmware partition is compatible FIT image dynamic splitting.
+
+Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
+---
+ .../boot/dts/allwinner/sun50i-a64-sopine.dtsi | 22 +++++++++++++++++++
+ 1 file changed, 22 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
+@@ -58,6 +58,28 @@
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
++
++ partitions {
++ compatible = "fixed-partitions";
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ partition@0 {
++ label = "u-boot";
++ reg = <0x000000 0x0E0000>;
++ };
++
++ partition@e0000 {
++ label = "u-boot-env";
++ reg = <0x0E0000 0x020000>;
++ };
++
++ partition@100000 {
++ compatible = "denx,fit";
++ label = "firmware";
++ reg = <0x100000 0xF00000>;
++ };
++ };
+ };
+ };
+
--- /dev/null
+--- a/arch/arm/boot/dts/allwinner/Makefile
++++ b/arch/arm/boot/dts/allwinner/Makefile
+@@ -1352,6 +1352,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
+ sun8i-a83t-cubietruck-plus.dtb \
+ sun8i-a83t-tbs-a711.dtb \
+ sun8i-h2-plus-bananapi-m2-zero.dtb \
++ sun8i-h2-plus-bananapi-p2-zero.dtb \
+ sun8i-h2-plus-libretech-all-h3-cc.dtb \
+ sun8i-h2-plus-orangepi-r1.dtb \
+ sun8i-h2-plus-orangepi-zero.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-p2-zero.dts
+@@ -0,0 +1,279 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright (C) 2023 Zoltan HERPAI <wigyori@uid0.hu>
++ *
++ * Based on sun8i-h2-plus-bananapi-m2-zero.dts, which is:
++ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
++ */
++
++/dts-v1/;
++#include "sun8i-h3.dtsi"
++#include "sunxi-common-regulators.dtsi"
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++
++/ {
++ model = "Banana Pi BPI-P2-Zero";
++ compatible = "sinovoip,bpi-p2-zero", "allwinner,sun8i-h2-plus";
++
++ aliases {
++ serial0 = &uart0;
++ serial1 = &uart1;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ connector {
++ compatible = "hdmi-connector";
++ type = "c";
++
++ port {
++ hdmi_con_in: endpoint {
++ remote-endpoint = <&hdmi_out_con>;
++ };
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ pwr_led {
++ label = "bananapi-p2-zero:red:pwr";
++ gpios = <&r_pio 0 10 GPIO_ACTIVE_LOW>; /* PL10 */
++ default-state = "on";
++ };
++ };
++
++ gpio_keys {
++ compatible = "gpio-keys";
++
++ sw4 {
++ label = "power";
++ linux,code = <BTN_0>;
++ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ reg_vdd_cpux: vdd-cpux-regulator {
++ compatible = "regulator-gpio";
++ regulator-name = "vdd-cpux";
++ regulator-type = "voltage";
++ regulator-boot-on;
++ regulator-always-on;
++ regulator-min-microvolt = <1100000>;
++ regulator-max-microvolt = <1300000>;
++ regulator-ramp-delay = <50>; /* 4ms */
++
++ gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
++ enable-active-high;
++ gpios-states = <0x1>;
++ states = <1100000 0>, <1300000 1>;
++ };
++
++ reg_vcc_dram: vcc-dram {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc-dram";
++ regulator-min-microvolt = <1500000>;
++ regulator-max-microvolt = <1500000>;
++ regulator-always-on;
++ regulator-boot-on;
++ enable-active-high;
++ gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
++ vin-supply = <®_vcc5v0>;
++ };
++
++ reg_vcc1v2: vcc1v2 {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc1v2";
++ regulator-min-microvolt = <1200000>;
++ regulator-max-microvolt = <1200000>;
++ regulator-always-on;
++ regulator-boot-on;
++ enable-active-high;
++ gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
++ vin-supply = <®_vcc5v0>;
++ };
++
++ poweroff {
++ compatible = "regulator-poweroff";
++ cpu-supply = <®_vcc1v2>;
++ };
++
++ wifi_pwrseq: wifi_pwrseq {
++ compatible = "mmc-pwrseq-simple";
++ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
++ clocks = <&rtc 1>;
++ clock-names = "ext_clock";
++ };
++};
++
++&cpu0 {
++ cpu-supply = <®_vdd_cpux>;
++};
++
++&de {
++ status = "okay";
++};
++
++&ehci0 {
++ status = "okay";
++};
++
++&emac {
++ phy-handle = <&int_mii_phy>;
++ phy-mode = "mii";
++ allwinner,leds-active-low;
++ status = "okay";
++};
++
++&hdmi {
++ status = "okay";
++};
++
++&hdmi_out {
++ hdmi_out_con: endpoint {
++ remote-endpoint = <&hdmi_con_in>;
++ };
++};
++
++&mmc0 {
++ vmmc-supply = <®_vcc3v3>;
++ bus-width = <4>;
++ /*
++ * On the production batch of this board the card detect GPIO is
++ * high active (card inserted), although on the early samples it's
++ * low active.
++ */
++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
++ status = "okay";
++};
++
++&mmc1 {
++ vmmc-supply = <®_vcc3v3>;
++ vqmmc-supply = <®_vcc3v3>;
++ mmc-pwrseq = <&wifi_pwrseq>;
++ bus-width = <4>;
++ non-removable;
++ status = "okay";
++
++ brcmf: wifi@1 {
++ reg = <1>;
++ compatible = "brcm,bcm4329-fmac";
++ interrupt-parent = <&pio>;
++ interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
++ interrupt-names = "host-wake";
++ };
++};
++
++&ohci0 {
++ status = "okay";
++};
++
++&uart0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_pa_pins>;
++ status = "okay";
++};
++
++&uart1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
++ uart-has-rtscts;
++ status = "okay";
++
++ bluetooth {
++ compatible = "brcm,bcm43438-bt";
++ max-speed = <1500000>;
++ clocks = <&rtc 1>;
++ clock-names = "lpo";
++ vbat-supply = <®_vcc3v3>;
++ vddio-supply = <®_vcc3v3>;
++ device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
++ host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
++ shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
++ };
++
++};
++
++&pio {
++ gpio-line-names =
++ /* PA */
++ "CON2-P13", "CON2-P11", "CON2-P22", "CON2-P15",
++ "CON3-P03", "CON3-P02", "CON2-P07", "CON2-P29",
++ "CON2-P31", "CON2-P33", "CON2-P35", "CON2-P05",
++ "CON2-P03", "CON2-P08", "CON2-P10", "CON2-P16",
++ "CON2-P12", "CON2-P37", "CON2-P28", "CON2-P27",
++ "CON2-P40", "CON2-P38", "", "",
++ "", "", "", "", "", "", "", "",
++
++ /* PB */
++ "", "", "", "", "", "", "", "",
++ "", "", "", "", "", "", "", "",
++ "", "", "", "", "", "", "", "",
++ "", "", "", "", "", "", "", "",
++
++ /* PC */
++ "CON2-P19", "CON2-P21", "CON2-P23", "CON2-P24",
++ "CON2-P18", "", "", "CON2-P26",
++ "", "", "", "", "", "", "", "",
++ "", "", "", "", "", "", "", "",
++ "", "", "", "", "", "", "", "",
++
++ /* PD */
++ "", "", "", "", "", "", "", "",
++ "", "", "", "", "", "", "CSI-PWR-EN", "",
++ "", "", "", "", "", "", "", "",
++ "", "", "", "", "", "", "", "",
++
++ /* PE */
++ "CN3-P17", "CN3-P13", "CN3-P09", "CN3-P07",
++ "CN3-P19", "CN3-P21", "CN3-P22", "CN3-P20",
++ "CN3-P18", "CN3-P16", "CN3-P14", "CN3-P12",
++ "CN3-P05", "CN3-P03", "CN3-P06", "CN3-P08",
++ "", "", "", "", "", "", "", "",
++ "", "", "", "", "", "", "", "",
++
++ /* PF */
++ "SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3",
++ "SDC0-D2", "SDC0-DET", "",
++ "", "", "", "", "", "", "", "",
++ "", "", "", "", "", "", "", "",
++ "", "", "", "", "", "", "", "",
++
++ /* PG */
++ "WL-SDIO-CLK", "WL-SDIO-CMD", "WL-SDIO-D0", "WL-SDIO-D1",
++ "WL-SDIO-D2", "WL-SDIO-D3", "BT-UART-TX", "BT-UART-RX",
++ "BT-UART-RTS", "BT-UART-CTS", "WL-WAKE-AP", "BT-WAKE-AP",
++ "BT-RST-N", "AP-WAKE-BT", "", "",
++ "", "", "", "", "", "", "", "",
++ "", "", "", "", "", "", "", "";
++};
++
++&r_pio {
++ gpio-line-names =
++ /* PL */
++ "", "CPUX-SET", "CON2-P32", "POWER-KEY", "CON2-P36",
++ "VCC-IO-EN", "USB0-ID", "WL-PWR-EN",
++ "PWR-STB", "PWR-DRAM", "PWR-LED", "IR-RX", "", "", "", "",
++ "", "", "", "", "", "", "", "",
++ "", "", "", "", "", "", "", "";
++};
++
++&usb_otg {
++ dr_mode = "otg";
++ status = "okay";
++};
++
++&usbphy {
++ usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
++ /*
++ * There're two micro-USB connectors, one is power-only and another is
++ * OTG. The Vbus of these two connectors are connected together, so
++ * the external USB device will be powered just by the power input
++ * from the power-only USB port.
++ */
++ status = "okay";
++};
--- /dev/null
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz@true.cz>
+Date: Thu, 26 Mar 2020 10:09:19 +0100
+Subject: [PATCH] arm64: dts: allwinner: a64: olinuxino: add status LED aliases
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Petr Štetiar <ynezz@true.cz>
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+@@ -15,6 +15,10 @@
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
++ led-boot = &led_user;
++ led-failsafe = &led_user;
++ led-running = &led_user;
++ led-upgrade = &led_user;
+ };
+
+ chosen {
+@@ -35,7 +39,7 @@
+ leds {
+ compatible = "gpio-leds";
+
+- led-0 {
++ led_user: led-0 {
+ label = "a64-olinuxino:red:user";
+ gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+ };
--- /dev/null
+From 1845163a052efac124f00656eb72f38947630a42 Mon Sep 17 00:00:00 2001
+From: Chukun Pan <amadeus@jmu.edu.cn>
+Date: Sun, 10 Oct 2021 21:50:18 +0800
+Subject: [PATCH] arm64: dts: allwinner: NanoPi R1S H5: add status LED aliases
+
+Use the SYS LED on the casing for showing system status.
+
+Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 7 ++++++-
+ 1 file changed, 6 insertions(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
+@@ -23,6 +23,11 @@
+ ethernet0 = &emac;
+ ethernet1 = &rtl8189etv;
+ serial0 = &uart0;
++
++ led-boot = &led_sys;
++ led-failsafe = &led_sys;
++ led-running = &led_sys;
++ led-upgrade = &led_sys;
+ };
+
+ chosen {
+@@ -38,7 +43,7 @@
+ gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
+ };
+
+- led-1 {
++ led_sys: led-1 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
--- /dev/null
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
+@@ -41,3 +41,7 @@
+ reg = <1>;
+ };
+ };
++
++&pwm {
++ status = "okay";
++};
--- /dev/null
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+@@ -42,6 +42,11 @@
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
++
++ wifi_pwrseq: wifi_pwrseq {
++ compatible = "mmc-pwrseq-simple";
++ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
++ };
+ };
+
+ &ac_power_supply {
+@@ -102,6 +107,21 @@
+ reg = <1>;
+ };
+ };
++
++&mmc1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc1_pins>;
++ vmmc-supply = <®_dldo4>;
++ vqmmc-supply = <®_eldo1>;
++ mmc-pwrseq = <&wifi_pwrseq>;
++ bus-width = <4>;
++ non-removable;
++ status = "okay";
++
++ rtl8723cs: wifi@1 {
++ reg = <1>;
++ };
++};
+
+ &mmc2 {
+ pinctrl-names = "default";
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+@@ -35,6 +35,11 @@
+ };
+ };
+ };
++
++ wifi_pwrseq: wifi_pwrseq {
++ compatible = "mmc-pwrseq-simple";
++ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
++ };
+ };
+
+ &codec {
+@@ -124,6 +129,21 @@
+ status = "okay";
+ };
+
++&mmc1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc1_pins>;
++ vmmc-supply = <®_dldo4>;
++ vqmmc-supply = <®_eldo1>;
++ mmc-pwrseq = <&wifi_pwrseq>;
++ bus-width = <4>;
++ non-removable;
++ status = "okay";
++
++ rtl8723cs: wifi@1 {
++ reg = <1>;
++ };
++};
++
+ &ohci0 {
+ status = "okay";
+ };
projects / openwrt / staging / wigyori.git / commitdiff