Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
System-on-Chip devices.
-config ARCH_NS9XXX
- bool "NetSilicon NS9xxx"
- select CPU_ARM926T
- select GENERIC_GPIO
- select GENERIC_CLOCKEVENTS
- select HAVE_CLK
- help
- Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
- System.
-
- <http://www.digi.com/products/microprocessors/index.jsp>
-
config ARCH_W90X900
bool "Nuvoton W90X900 CPU"
select CPU_ARM926T
source "arch/arm/mach-nomadik/Kconfig"
source "arch/arm/plat-nomadik/Kconfig"
-source "arch/arm/mach-ns9xxx/Kconfig"
-
source "arch/arm/mach-nuc93x/Kconfig"
source "arch/arm/plat-omap/Kconfig"
machine-$(CONFIG_ARCH_MXS) := mxs
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NOMADIK) := nomadik
-machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx
machine-$(CONFIG_ARCH_OMAP1) := omap1
machine-$(CONFIG_ARCH_OMAP2) := omap2
machine-$(CONFIG_ARCH_OMAP3) := omap2
+++ /dev/null
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_NS9XXX=y
-CONFIG_MACH_CC9P9360DEV=y
-CONFIG_MACH_CC9P9360JS=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_SYN_COOKIES=y
-CONFIG_MTD=m
-CONFIG_MTD_CONCAT=m
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_PHYSMAP=m
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=m
-CONFIG_I2C_GPIO=m
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_RTC_CLASS=m
-CONFIG_EXT2_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=m
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
+++ /dev/null
-if ARCH_NS9XXX
-
-menu "NS9xxx Implementations"
-
-config NS9XXX_HAVE_SERIAL8250
- bool
-
-config PROCESSOR_NS9360
- bool
-
-config MODULE_CC9P9360
- bool
- select PROCESSOR_NS9360
-
-config BOARD_A9M9750DEV
- select NS9XXX_HAVE_SERIAL8250
- bool
-
-config BOARD_JSCC9P9360
- bool
-
-config MACH_CC9P9360DEV
- bool "ConnectCore 9P 9360 on an A9M9750 Devboard"
- select MODULE_CC9P9360
- select BOARD_A9M9750DEV
- help
- Say Y here if you are using the Digi ConnectCore 9P 9360
- on an A9M9750 Development Board.
-
-config MACH_CC9P9360JS
- bool "ConnectCore 9P 9360 on a JSCC9P9360 Devboard"
- select MODULE_CC9P9360
- select BOARD_JSCC9P9360
- help
- Say Y here if you are using the Digi ConnectCore 9P 9360
- on an JSCC9P9360 Development Board.
-
-endmenu
-
-endif
+++ /dev/null
-obj-y := clock.o generic.o gpio.o irq.o
-
-obj-$(CONFIG_MACH_CC9P9360DEV) += mach-cc9p9360dev.o
-obj-$(CONFIG_MACH_CC9P9360JS) += mach-cc9p9360js.o
-
-obj-$(CONFIG_PROCESSOR_NS9360) += gpio-ns9360.o processor-ns9360.o time-ns9360.o
-
-obj-$(CONFIG_BOARD_A9M9750DEV) += board-a9m9750dev.o
-obj-$(CONFIG_BOARD_JSCC9P9360) += board-jscc9p9360.o
-
-# platform devices
-obj-$(CONFIG_NS9XXX_HAVE_SERIAL8250) += plat-serial8250.o
+++ /dev/null
-zreladdr-y := 0x8000
-params_phys-y := 0x100
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/board-a9m9750dev.c
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/irq.h>
-
-#include <asm/mach/map.h>
-#include <asm/gpio.h>
-
-#include <mach/board.h>
-#include <mach/processor-ns9360.h>
-#include <mach/regs-sys-ns9360.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-bbu.h>
-#include <mach/regs-board-a9m9750dev.h>
-
-#include "board-a9m9750dev.h"
-
-static struct map_desc board_a9m9750dev_io_desc[] __initdata = {
- { /* FPGA on CS0 */
- .virtual = io_p2v(NS9XXX_CSxSTAT_PHYS(0)),
- .pfn = __phys_to_pfn(NS9XXX_CSxSTAT_PHYS(0)),
- .length = NS9XXX_CS0STAT_LENGTH,
- .type = MT_DEVICE,
- },
-};
-
-void __init board_a9m9750dev_map_io(void)
-{
- iotable_init(board_a9m9750dev_io_desc,
- ARRAY_SIZE(board_a9m9750dev_io_desc));
-}
-
-static void a9m9750dev_fpga_ack_irq(struct irq_data *d)
-{
- /* nothing */
-}
-
-static void a9m9750dev_fpga_mask_irq(struct irq_data *d)
-{
- u8 ier;
-
- ier = __raw_readb(FPGA_IER);
-
- ier &= ~(1 << (d->irq - FPGA_IRQ(0)));
-
- __raw_writeb(ier, FPGA_IER);
-}
-
-static void a9m9750dev_fpga_maskack_irq(struct irq_data *d)
-{
- a9m9750dev_fpga_mask_irq(d);
- a9m9750dev_fpga_ack_irq(d);
-}
-
-static void a9m9750dev_fpga_unmask_irq(struct irq_data *d)
-{
- u8 ier;
-
- ier = __raw_readb(FPGA_IER);
-
- ier |= 1 << (d->irq - FPGA_IRQ(0));
-
- __raw_writeb(ier, FPGA_IER);
-}
-
-static struct irq_chip a9m9750dev_fpga_chip = {
- .irq_ack = a9m9750dev_fpga_ack_irq,
- .irq_mask = a9m9750dev_fpga_mask_irq,
- .irq_mask_ack = a9m9750dev_fpga_maskack_irq,
- .irq_unmask = a9m9750dev_fpga_unmask_irq,
-};
-
-static void a9m9750dev_fpga_demux_handler(unsigned int irq,
- struct irq_desc *desc)
-{
- u8 stat = __raw_readb(FPGA_ISR);
-
- desc->irq_data.chip->irq_mask_ack(&desc->irq_data);
-
- while (stat != 0) {
- int irqno = fls(stat) - 1;
-
- stat &= ~(1 << irqno);
-
- generic_handle_irq(FPGA_IRQ(irqno));
- }
-
- desc->irq_data.chip->irq_unmask(&desc->irq_data);
-}
-
-void __init board_a9m9750dev_init_irq(void)
-{
- u32 eic;
- int i;
-
- if (gpio_request(11, "board a9m9750dev extirq2") == 0)
- ns9360_gpio_configure(11, 0, 1);
- else
- printk(KERN_ERR "%s: cannot get gpio 11 for IRQ_NS9XXX_EXT2\n",
- __func__);
-
- for (i = FPGA_IRQ(0); i <= FPGA_IRQ(7); ++i) {
- irq_set_chip_and_handler(i, &a9m9750dev_fpga_chip,
- handle_level_irq);
- set_irq_flags(i, IRQF_VALID);
- }
-
- /* IRQ_NS9XXX_EXT2: level sensitive + active low */
- eic = __raw_readl(SYS_EIC(2));
- REGSET(eic, SYS_EIC, PLTY, AL);
- REGSET(eic, SYS_EIC, LVEDG, LEVEL);
- __raw_writel(eic, SYS_EIC(2));
-
- irq_set_chained_handler(IRQ_NS9XXX_EXT2,
- a9m9750dev_fpga_demux_handler);
-}
-
-void __init board_a9m9750dev_init_machine(void)
-{
- u32 reg;
-
- /* setup static CS0: memory base ... */
- reg = __raw_readl(SYS_SMCSSMB(0));
- REGSETIM(reg, SYS_SMCSSMB, CSxB, NS9XXX_CSxSTAT_PHYS(0) >> 12);
- __raw_writel(reg, SYS_SMCSSMB(0));
-
- /* ... and mask */
- reg = __raw_readl(SYS_SMCSSMM(0));
- REGSETIM(reg, SYS_SMCSSMM, CSxM, 0xfffff);
- REGSET(reg, SYS_SMCSSMM, CSEx, EN);
- __raw_writel(reg, SYS_SMCSSMM(0));
-
- /* setup static CS0: memory configuration */
- reg = __raw_readl(MEM_SMC(0));
- REGSET(reg, MEM_SMC, PSMC, OFF);
- REGSET(reg, MEM_SMC, BSMC, OFF);
- REGSET(reg, MEM_SMC, EW, OFF);
- REGSET(reg, MEM_SMC, PB, 1);
- REGSET(reg, MEM_SMC, PC, AL);
- REGSET(reg, MEM_SMC, PM, DIS);
- REGSET(reg, MEM_SMC, MW, 8);
- __raw_writel(reg, MEM_SMC(0));
-
- /* setup static CS0: timing */
- __raw_writel(0x2, MEM_SMWED(0));
- __raw_writel(0x2, MEM_SMOED(0));
- __raw_writel(0x6, MEM_SMRD(0));
- __raw_writel(0x6, MEM_SMWD(0));
-}
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/board-a9m9750dev.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/init.h>
-
-void __init board_a9m9750dev_map_io(void);
-void __init board_a9m9750dev_init_machine(void);
-void __init board_a9m9750dev_init_irq(void);
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/board-jscc9p9360.c
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include "board-jscc9p9360.h"
-
-void __init board_jscc9p9360_init_machine(void)
-{
- /* TODO: reserve GPIOs for push buttons, etc pp */
-}
-
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/board-jscc9p9360.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/init.h>
-
-void __init board_jscc9p9360_init_machine(void);
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/clock.c
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/err.h>
-#include <linux/module.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-#include <linux/semaphore.h>
-
-#include "clock.h"
-
-static LIST_HEAD(clocks);
-static DEFINE_SPINLOCK(clk_lock);
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
- struct clk *p, *ret = NULL, *retgen = NULL;
- unsigned long flags;
- int idno;
-
- if (dev == NULL || dev->bus != &platform_bus_type)
- idno = -1;
- else
- idno = to_platform_device(dev)->id;
-
- spin_lock_irqsave(&clk_lock, flags);
- list_for_each_entry(p, &clocks, node) {
- if (strcmp(id, p->name) == 0) {
- if (p->id == idno) {
- if (!try_module_get(p->owner))
- continue;
- ret = p;
- break;
- } else if (p->id == -1)
- /* remember match with id == -1 in case there is
- * no clock for idno */
- retgen = p;
- }
- }
-
- if (!ret && retgen && try_module_get(retgen->owner))
- ret = retgen;
-
- if (ret)
- ++ret->refcount;
-
- spin_unlock_irqrestore(&clk_lock, flags);
-
- return ret ? ret : ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
- module_put(clk->owner);
- --clk->refcount;
-}
-EXPORT_SYMBOL(clk_put);
-
-static int clk_enable_unlocked(struct clk *clk)
-{
- int ret = 0;
- if (clk->parent) {
- ret = clk_enable_unlocked(clk->parent);
- if (ret)
- return ret;
- }
-
- if (clk->usage++ == 0 && clk->endisable)
- ret = clk->endisable(clk, 1);
-
- return ret;
-}
-
-int clk_enable(struct clk *clk)
-{
- int ret;
- unsigned long flags;
-
- spin_lock_irqsave(&clk_lock, flags);
-
- ret = clk_enable_unlocked(clk);
-
- spin_unlock_irqrestore(&clk_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-static void clk_disable_unlocked(struct clk *clk)
-{
- if (--clk->usage == 0 && clk->endisable)
- clk->endisable(clk, 0);
-
- if (clk->parent)
- clk_disable_unlocked(clk->parent);
-}
-
-void clk_disable(struct clk *clk)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&clk_lock, flags);
-
- clk_disable_unlocked(clk);
-
- spin_unlock_irqrestore(&clk_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- if (clk->get_rate)
- return clk->get_rate(clk);
-
- if (clk->rate)
- return clk->rate;
-
- if (clk->parent)
- return clk_get_rate(clk->parent);
-
- return 0;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int clk_register(struct clk *clk)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&clk_lock, flags);
-
- list_add(&clk->node, &clocks);
-
- if (clk->parent)
- ++clk->parent->refcount;
-
- spin_unlock_irqrestore(&clk_lock, flags);
-
- return 0;
-}
-
-int clk_unregister(struct clk *clk)
-{
- int ret = 0;
- unsigned long flags;
-
- spin_lock_irqsave(&clk_lock, flags);
-
- if (clk->usage || clk->refcount)
- ret = -EBUSY;
- else
- list_del(&clk->node);
-
- if (clk->parent)
- --clk->parent->refcount;
-
- spin_unlock_irqrestore(&clk_lock, flags);
-
- return ret;
-}
-
-#if defined CONFIG_DEBUG_FS
-
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
-static int clk_debugfs_show(struct seq_file *s, void *null)
-{
- unsigned long flags;
- struct clk *p;
-
- spin_lock_irqsave(&clk_lock, flags);
-
- list_for_each_entry(p, &clocks, node)
- seq_printf(s, "%s.%d: usage=%lu refcount=%lu rate=%lu\n",
- p->name, p->id, p->usage, p->refcount,
- p->usage ? clk_get_rate(p) : 0);
-
- spin_unlock_irqrestore(&clk_lock, flags);
-
- return 0;
-}
-
-static int clk_debugfs_open(struct inode *inode, struct file *file)
-{
- return single_open(file, clk_debugfs_show, NULL);
-}
-
-static const struct file_operations clk_debugfs_operations = {
- .open = clk_debugfs_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int __init clk_debugfs_init(void)
-{
- struct dentry *dentry;
-
- dentry = debugfs_create_file("clk", S_IFREG | S_IRUGO, NULL, NULL,
- &clk_debugfs_operations);
- return IS_ERR(dentry) ? PTR_ERR(dentry) : 0;
-}
-subsys_initcall(clk_debugfs_init);
-
-#endif /* if defined CONFIG_DEBUG_FS */
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/clock.h
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __NS9XXX_CLOCK_H
-#define __NS9XXX_CLOCK_H
-
-#include <linux/list.h>
-
-struct clk {
- struct module *owner;
- const char *name;
- int id;
-
- struct clk *parent;
-
- unsigned long rate;
- int (*endisable)(struct clk *, int enable);
- unsigned long (*get_rate)(struct clk *);
-
- struct list_head node;
- unsigned long refcount;
- unsigned long usage;
-};
-
-int clk_register(struct clk *clk);
-int clk_unregister(struct clk *clk);
-
-#endif /* ifndef __NS9XXX_CLOCK_H */
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/generic.c
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/memory.h>
-
-#include "generic.h"
-
-void __init ns9xxx_init_machine(void)
-{
-}
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/generic.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/time.h>
-#include <asm/mach/time.h>
-#include <linux/init.h>
-
-void __init ns9xxx_init_irq(void);
-void __init ns9xxx_init_machine(void);
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/gpio-ns9360.c
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/bug.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <mach/regs-bbu.h>
-#include <mach/processor-ns9360.h>
-
-#include "gpio-ns9360.h"
-
-static inline int ns9360_valid_gpio(unsigned gpio)
-{
- return gpio <= 72;
-}
-
-static inline void __iomem *ns9360_gpio_get_gconfaddr(unsigned gpio)
-{
- if (gpio < 56)
- return BBU_GCONFb1(gpio / 8);
- else
- /*
- * this could be optimised away on
- * ns9750 only builds, but it isn't ...
- */
- return BBU_GCONFb2((gpio - 56) / 8);
-}
-
-static inline void __iomem *ns9360_gpio_get_gctrladdr(unsigned gpio)
-{
- if (gpio < 32)
- return BBU_GCTRL1;
- else if (gpio < 64)
- return BBU_GCTRL2;
- else
- /* this could be optimised away on ns9750 only builds */
- return BBU_GCTRL3;
-}
-
-static inline void __iomem *ns9360_gpio_get_gstataddr(unsigned gpio)
-{
- if (gpio < 32)
- return BBU_GSTAT1;
- else if (gpio < 64)
- return BBU_GSTAT2;
- else
- /* this could be optimised away on ns9750 only builds */
- return BBU_GSTAT3;
-}
-
-/*
- * each gpio can serve for 4 different purposes [0..3]. These are called
- * "functions" and passed in the parameter func. Functions 0-2 are always some
- * special things, function 3 is GPIO. If func == 3 dir specifies input or
- * output, and with inv you can enable an inverter (independent of func).
- */
-int __ns9360_gpio_configure(unsigned gpio, int dir, int inv, int func)
-{
- void __iomem *conf = ns9360_gpio_get_gconfaddr(gpio);
- u32 confval;
-
- confval = __raw_readl(conf);
- REGSETIM_IDX(confval, BBU_GCONFx, DIR, gpio & 7, dir);
- REGSETIM_IDX(confval, BBU_GCONFx, INV, gpio & 7, inv);
- REGSETIM_IDX(confval, BBU_GCONFx, FUNC, gpio & 7, func);
- __raw_writel(confval, conf);
-
- return 0;
-}
-
-int ns9360_gpio_configure(unsigned gpio, int inv, int func)
-{
- if (likely(ns9360_valid_gpio(gpio))) {
- if (func == 3) {
- printk(KERN_WARNING "use gpio_direction_input "
- "or gpio_direction_output\n");
- return -EINVAL;
- } else
- return __ns9360_gpio_configure(gpio, 0, inv, func);
- } else
- return -EINVAL;
-}
-EXPORT_SYMBOL(ns9360_gpio_configure);
-
-int ns9360_gpio_get_value(unsigned gpio)
-{
- void __iomem *stat = ns9360_gpio_get_gstataddr(gpio);
- int ret;
-
- ret = 1 & (__raw_readl(stat) >> (gpio & 31));
-
- return ret;
-}
-
-void ns9360_gpio_set_value(unsigned gpio, int value)
-{
- void __iomem *ctrl = ns9360_gpio_get_gctrladdr(gpio);
- u32 ctrlval;
-
- ctrlval = __raw_readl(ctrl);
-
- if (value)
- ctrlval |= 1 << (gpio & 31);
- else
- ctrlval &= ~(1 << (gpio & 31));
-
- __raw_writel(ctrlval, ctrl);
-}
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/gpio-ns9360.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-int __ns9360_gpio_configure(unsigned gpio, int dir, int inv, int func);
-int ns9360_gpio_get_value(unsigned gpio);
-void ns9360_gpio_set_value(unsigned gpio, int value);
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/gpio.c
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/compiler.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <linux/bitops.h>
-
-#include <mach/gpio.h>
-#include <mach/processor.h>
-#include <mach/processor-ns9360.h>
-#include <asm/bug.h>
-#include <asm/types.h>
-
-#include "gpio-ns9360.h"
-
-#if defined(CONFIG_PROCESSOR_NS9360)
-#define GPIO_MAX 72
-#elif defined(CONFIG_PROCESSOR_NS9750)
-#define GPIO_MAX 49
-#endif
-
-/* protects BBU_GCONFx and BBU_GCTRLx */
-static spinlock_t gpio_lock = __SPIN_LOCK_UNLOCKED(gpio_lock);
-
-/* only access gpiores with atomic ops */
-static DECLARE_BITMAP(gpiores, GPIO_MAX + 1);
-
-static inline int ns9xxx_valid_gpio(unsigned gpio)
-{
-#if defined(CONFIG_PROCESSOR_NS9360)
- if (processor_is_ns9360())
- return gpio <= 72;
- else
-#endif
-#if defined(CONFIG_PROCESSOR_NS9750)
- if (processor_is_ns9750())
- return gpio <= 49;
- else
-#endif
- {
- BUG();
- return 0;
- }
-}
-
-int gpio_request(unsigned gpio, const char *label)
-{
- if (likely(ns9xxx_valid_gpio(gpio)))
- return test_and_set_bit(gpio, gpiores) ? -EBUSY : 0;
- else
- return -EINVAL;
-}
-EXPORT_SYMBOL(gpio_request);
-
-void gpio_free(unsigned gpio)
-{
- might_sleep();
- clear_bit(gpio, gpiores);
- return;
-}
-EXPORT_SYMBOL(gpio_free);
-
-int gpio_direction_input(unsigned gpio)
-{
- if (likely(ns9xxx_valid_gpio(gpio))) {
- int ret = -EINVAL;
- unsigned long flags;
-
- spin_lock_irqsave(&gpio_lock, flags);
-#if defined(CONFIG_PROCESSOR_NS9360)
- if (processor_is_ns9360())
- ret = __ns9360_gpio_configure(gpio, 0, 0, 3);
- else
-#endif
- BUG();
-
- spin_unlock_irqrestore(&gpio_lock, flags);
-
- return ret;
-
- } else
- return -EINVAL;
-}
-EXPORT_SYMBOL(gpio_direction_input);
-
-int gpio_direction_output(unsigned gpio, int value)
-{
- if (likely(ns9xxx_valid_gpio(gpio))) {
- int ret = -EINVAL;
- unsigned long flags;
-
- gpio_set_value(gpio, value);
-
- spin_lock_irqsave(&gpio_lock, flags);
-#if defined(CONFIG_PROCESSOR_NS9360)
- if (processor_is_ns9360())
- ret = __ns9360_gpio_configure(gpio, 1, 0, 3);
- else
-#endif
- BUG();
-
- spin_unlock_irqrestore(&gpio_lock, flags);
-
- return ret;
- } else
- return -EINVAL;
-}
-EXPORT_SYMBOL(gpio_direction_output);
-
-int gpio_get_value(unsigned gpio)
-{
-#if defined(CONFIG_PROCESSOR_NS9360)
- if (processor_is_ns9360())
- return ns9360_gpio_get_value(gpio);
- else
-#endif
- {
- BUG();
- return -EINVAL;
- }
-}
-EXPORT_SYMBOL(gpio_get_value);
-
-void gpio_set_value(unsigned gpio, int value)
-{
- unsigned long flags;
- spin_lock_irqsave(&gpio_lock, flags);
-#if defined(CONFIG_PROCESSOR_NS9360)
- if (processor_is_ns9360())
- ns9360_gpio_set_value(gpio, value);
- else
-#endif
- BUG();
-
- spin_unlock_irqrestore(&gpio_lock, flags);
-}
-EXPORT_SYMBOL(gpio_set_value);
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/include/mach/board.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_BOARD_H
-#define __ASM_ARCH_BOARD_H
-
-#include <asm/mach-types.h>
-
-#define board_is_a9m9750dev() (0 \
- || machine_is_cc9p9750dev() \
- )
-
-#define board_is_a9mvali() (0 \
- || machine_is_cc9p9750val() \
- )
-
-#define board_is_jscc9p9210() (0 \
- || machine_is_cc9p9210js() \
- )
-
-#define board_is_jscc9p9215() (0 \
- || machine_is_cc9p9215js() \
- )
-
-#define board_is_jscc9p9360() (0 \
- || machine_is_cc9p9360js() \
- )
-
-#define board_is_uncbas() (0 \
- || machine_is_cc7ucamry() \
- )
-
-#endif /* ifndef __ASM_ARCH_BOARD_H */
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/include/mach/debug-macro.S
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <mach/hardware.h>
-#include <asm/memory.h>
-
-#include <mach/regs-board-a9m9750dev.h>
-
- .macro addruart, rp, rv
- ldr \rp, =NS9XXX_CSxSTAT_PHYS(0)
- ldr \rv, =io_p2v(NS9XXX_CSxSTAT_PHYS(0))
- .endm
-
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/include/mach/entry-macro.S
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <mach/hardware.h>
-#include <mach/regs-sys-common.h>
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =SYS_ISRADDR
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqstat, [\base, #(SYS_ISA - SYS_ISRADDR)]
- cmp \irqstat, #0
- ldrne \irqnr, [\base]
- .endm
-
- .macro disable_fiq
- .endm
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/include/mach/gpio.h
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
-*/
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#include <asm/errno.h>
-
-int gpio_request(unsigned gpio, const char *label);
-
-void gpio_free(unsigned gpio);
-
-int ns9xxx_gpio_configure(unsigned gpio, int inv, int func);
-
-int gpio_direction_input(unsigned gpio);
-
-int gpio_direction_output(unsigned gpio, int value);
-
-int gpio_get_value(unsigned gpio);
-
-void gpio_set_value(unsigned gpio, int value);
-
-/*
- * ns9xxx can use gpio pins to trigger an irq, but it's not generic
- * enough to be supported by the gpio_to_irq/irq_to_gpio interface
- */
-static inline int gpio_to_irq(unsigned gpio)
-{
- return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return -EINVAL;
-}
-
-/* get the cansleep() stubs */
-#include <asm-generic/gpio.h>
-
-#endif /* ifndef __ASM_ARCH_GPIO_H */
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/include/mach/hardware.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/*
- * NetSilicon NS9xxx internal mapping:
- *
- * physical <--> virtual
- * 0x90000000 - 0x906fffff <--> 0xf9000000 - 0xf96fffff
- * 0xa0100000 - 0xa0afffff <--> 0xfa100000 - 0xfaafffff
- */
-#define io_p2v(x) (0xf0000000 \
- + (((x) & 0xf0000000) >> 4) \
- + ((x) & 0x00ffffff))
-
-#define io_v2p(x) ((((x) & 0x0f000000) << 4) \
- + ((x) & 0x00ffffff))
-
-#define __REGSHIFT(mask) ((mask) & (-(mask)))
-
-#define __REGBIT(bit) ((u32)1 << (bit))
-#define __REGBITS(hbit, lbit) ((((u32)1 << ((hbit) - (lbit) + 1)) - 1) << (lbit))
-#define __REGVAL(mask, value) (((value) * __REGSHIFT(mask)) & (mask))
-
-#ifndef __ASSEMBLY__
-
-# define __REG(x) ((void __iomem __force *)io_p2v((x)))
-# define __REG2(x, y) ((void __iomem __force *)(io_p2v((x)) + 4 * (y)))
-
-# define __REGSET(var, field, value) \
- ((var) = (((var) & ~((field) & ~(value))) | (value)))
-
-# define REGSET(var, reg, field, value) \
- __REGSET(var, reg ## _ ## field, reg ## _ ## field ## _ ## value)
-
-# define REGSET_IDX(var, reg, field, idx, value) \
- __REGSET(var, reg ## _ ## field((idx)), reg ## _ ## field ## _ ## value((idx)))
-
-# define REGSETIM(var, reg, field, value) \
- __REGSET(var, reg ## _ ## field, __REGVAL(reg ## _ ## field, (value)))
-
-# define REGSETIM_IDX(var, reg, field, idx, value) \
- __REGSET(var, reg ## _ ## field((idx)), __REGVAL(reg ## _ ## field((idx)), (value)))
-
-# define __REGGET(var, field) \
- (((var) & (field)))
-
-# define REGGET(var, reg, field) \
- __REGGET(var, reg ## _ ## field)
-
-# define REGGET_IDX(var, reg, field, idx) \
- __REGGET(var, reg ## _ ## field((idx)))
-
-# define REGGETIM(var, reg, field) \
- __REGGET(var, reg ## _ ## field) / __REGSHIFT(reg ## _ ## field)
-
-# define REGGETIM_IDX(var, reg, field, idx) \
- __REGGET(var, reg ## _ ## field((idx))) / \
- __REGSHIFT(reg ## _ ## field((idx)))
-
-#else
-
-# define __REG(x) io_p2v(x)
-# define __REG2(x, y) io_p2v((x) + 4 * (y))
-
-#endif
-
-#endif /* ifndef __ASM_ARCH_HARDWARE_H */
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/include/mach/io.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff /* XXX */
-
-#define __io(a) __typesafe_io(a)
-#define __mem_pci(a) (a)
-#define __mem_isa(a) (IO_BASE + (a))
-
-#endif /* ifndef __ASM_ARCH_IO_H */
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/include/mach/irqs.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-/* NetSilicon 9360 */
-#define IRQ_NS9XXX_WATCHDOG 0
-#define IRQ_NS9XXX_AHBBUSERR 1
-#define IRQ_NS9360_BBUSAGG 2
-/* irq 3 is reserved for NS9360 */
-#define IRQ_NS9XXX_ETHRX 4
-#define IRQ_NS9XXX_ETHTX 5
-#define IRQ_NS9XXX_ETHPHY 6
-#define IRQ_NS9360_LCD 7
-#define IRQ_NS9360_SERBRX 8
-#define IRQ_NS9360_SERBTX 9
-#define IRQ_NS9360_SERARX 10
-#define IRQ_NS9360_SERATX 11
-#define IRQ_NS9360_SERCRX 12
-#define IRQ_NS9360_SERCTX 13
-#define IRQ_NS9360_I2C 14
-#define IRQ_NS9360_BBUSDMA 15
-#define IRQ_NS9360_TIMER0 16
-#define IRQ_NS9360_TIMER1 17
-#define IRQ_NS9360_TIMER2 18
-#define IRQ_NS9360_TIMER3 19
-#define IRQ_NS9360_TIMER4 20
-#define IRQ_NS9360_TIMER5 21
-#define IRQ_NS9360_TIMER6 22
-#define IRQ_NS9360_TIMER7 23
-#define IRQ_NS9360_RTC 24
-#define IRQ_NS9360_USBHOST 25
-#define IRQ_NS9360_USBDEVICE 26
-#define IRQ_NS9360_IEEE1284 27
-#define IRQ_NS9XXX_EXT0 28
-#define IRQ_NS9XXX_EXT1 29
-#define IRQ_NS9XXX_EXT2 30
-#define IRQ_NS9XXX_EXT3 31
-
-#define BBUS_IRQ(irq) (32 + irq)
-
-#define IRQ_BBUS_DMA BBUS_IRQ(0)
-#define IRQ_BBUS_SERBRX BBUS_IRQ(2)
-#define IRQ_BBUS_SERBTX BBUS_IRQ(3)
-#define IRQ_BBUS_SERARX BBUS_IRQ(4)
-#define IRQ_BBUS_SERATX BBUS_IRQ(5)
-#define IRQ_BBUS_SERCRX BBUS_IRQ(6)
-#define IRQ_BBUS_SERCTX BBUS_IRQ(7)
-#define IRQ_BBUS_SERDRX BBUS_IRQ(8)
-#define IRQ_BBUS_SERDTX BBUS_IRQ(9)
-#define IRQ_BBUS_I2C BBUS_IRQ(10)
-#define IRQ_BBUS_1284 BBUS_IRQ(11)
-#define IRQ_BBUS_UTIL BBUS_IRQ(12)
-#define IRQ_BBUS_RTC BBUS_IRQ(13)
-#define IRQ_BBUS_USBHST BBUS_IRQ(14)
-#define IRQ_BBUS_USBDEV BBUS_IRQ(15)
-#define IRQ_BBUS_AHBDMA1 BBUS_IRQ(24)
-#define IRQ_BBUS_AHBDMA2 BBUS_IRQ(25)
-
-/*
- * these Interrupts are specific for the a9m9750dev board.
- * They are generated by an FPGA that interrupts the CPU on
- * IRQ_NS9360_EXT2
- */
-#define FPGA_IRQ(irq) (64 + irq)
-
-#define IRQ_FPGA_UARTA FPGA_IRQ(0)
-#define IRQ_FPGA_UARTB FPGA_IRQ(1)
-#define IRQ_FPGA_UARTC FPGA_IRQ(2)
-#define IRQ_FPGA_UARTD FPGA_IRQ(3)
-#define IRQ_FPGA_TOUCH FPGA_IRQ(4)
-#define IRQ_FPGA_CF FPGA_IRQ(5)
-#define IRQ_FPGA_CAN0 FPGA_IRQ(6)
-#define IRQ_FPGA_CAN1 FPGA_IRQ(7)
-
-#define NR_IRQS 72
-
-#endif /* __ASM_ARCH_IRQS_H */
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/include/mach/memory.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
-*/
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/* x in [0..3] */
-#define NS9XXX_CSxSTAT_PHYS(x) UL(((x) + 4) << 28)
-
-#define NS9XXX_CS0STAT_LENGTH UL(0x1000)
-#define NS9XXX_CS1STAT_LENGTH UL(0x1000)
-#define NS9XXX_CS2STAT_LENGTH UL(0x1000)
-#define NS9XXX_CS3STAT_LENGTH UL(0x1000)
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/include/mach/module.h
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_MODULE_H
-#define __ASM_ARCH_MODULE_H
-
-#include <asm/mach-types.h>
-
-#define module_is_cc7ucamry() (0 \
- || machine_is_cc7ucamry() \
- )
-
-#define module_is_cc9c() (0 \
- )
-
-#define module_is_cc9p9210() (0 \
- || machine_is_cc9p9210() \
- || machine_is_cc9p9210js() \
- )
-
-#define module_is_cc9p9215() (0 \
- || machine_is_cc9p9215() \
- || machine_is_cc9p9215js() \
- )
-
-#define module_is_cc9p9360() (0 \
- || machine_is_cc9p9360dev() \
- || machine_is_cc9p9360js() \
- )
-
-#define module_is_cc9p9750() (0 \
- || machine_is_a9m9750() \
- || machine_is_cc9p9750js() \
- || machine_is_cc9p9750val() \
- )
-
-#define module_is_ccw9c() (0 \
- )
-
-#define module_is_inc20otter() (0 \
- || machine_is_inc20otter() \
- )
-
-#define module_is_otter() (0 \
- || machine_is_otter() \
- )
-
-#endif /* ifndef __ASM_ARCH_MODULE_H */
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_PROCESSORNS9360_H
-#define __ASM_ARCH_PROCESSORNS9360_H
-
-#include <linux/init.h>
-
-void ns9360_reset(char mode);
-
-unsigned long ns9360_systemclock(void) __attribute__((const));
-
-static inline unsigned long ns9360_cpuclock(void) __attribute__((const));
-static inline unsigned long ns9360_cpuclock(void)
-{
- return ns9360_systemclock() / 2;
-}
-
-void __init ns9360_map_io(void);
-
-extern struct sys_timer ns9360_timer;
-
-int ns9360_gpio_configure(unsigned gpio, int inv, int func);
-
-#endif /* ifndef __ASM_ARCH_PROCESSORNS9360_H */
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/include/mach/processor.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_PROCESSOR_H
-#define __ASM_ARCH_PROCESSOR_H
-
-#include <mach/module.h>
-
-#define processor_is_ns9210() (0 \
- || module_is_cc7ucamry() \
- || module_is_cc9p9210() \
- || module_is_inc20otter() \
- || module_is_otter() \
- )
-
-#define processor_is_ns9215() (0 \
- || module_is_cc9p9215() \
- )
-
-#define processor_is_ns9360() (0 \
- || module_is_cc9p9360() \
- || module_is_cc9c() \
- || module_is_ccw9c() \
- )
-
-#define processor_is_ns9750() (0 \
- || module_is_cc9p9750() \
- )
-
-#define processor_is_ns921x() (0 \
- || processor_is_ns9210() \
- || processor_is_ns9215() \
- )
-
-#endif /* ifndef __ASM_ARCH_PROCESSOR_H */
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/include/mach/regs-bbu.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_REGSBBU_H
-#define __ASM_ARCH_REGSBBU_H
-
-#include <mach/hardware.h>
-
-/* BBus Utility */
-
-/* GPIO Configuration Registers block 1 */
-/* NOTE: the HRM starts counting at 1 for the GPIO registers, here the start is
- * at 0 for each block. That is, BBU_GCONFb1(0) is GPIO Configuration Register
- * #1, BBU_GCONFb2(0) is GPIO Configuration Register #8. */
-#define BBU_GCONFb1(x) __REG2(0x90600010, (x))
-#define BBU_GCONFb2(x) __REG2(0x90600100, (x))
-
-#define BBU_GCONFx_DIR(m) __REGBIT(3 + (((m) & 7) << 2))
-#define BBU_GCONFx_DIR_INPUT(m) __REGVAL(BBU_GCONFx_DIR(m), 0)
-#define BBU_GCONFx_DIR_OUTPUT(m) __REGVAL(BBU_GCONFx_DIR(m), 1)
-#define BBU_GCONFx_INV(m) __REGBIT(2 + (((m) & 7) << 2))
-#define BBU_GCONFx_INV_NO(m) __REGVAL(BBU_GCONFx_INV(m), 0)
-#define BBU_GCONFx_INV_YES(m) __REGVAL(BBU_GCONFx_INV(m), 1)
-#define BBU_GCONFx_FUNC(m) __REGBITS(1 + (((m) & 7) << 2), ((m) & 7) << 2)
-#define BBU_GCONFx_FUNC_0(m) __REGVAL(BBU_GCONFx_FUNC(m), 0)
-#define BBU_GCONFx_FUNC_1(m) __REGVAL(BBU_GCONFx_FUNC(m), 1)
-#define BBU_GCONFx_FUNC_2(m) __REGVAL(BBU_GCONFx_FUNC(m), 2)
-#define BBU_GCONFx_FUNC_3(m) __REGVAL(BBU_GCONFx_FUNC(m), 3)
-
-#define BBU_GCTRL1 __REG(0x90600030)
-#define BBU_GCTRL2 __REG(0x90600034)
-#define BBU_GCTRL3 __REG(0x90600120)
-
-#define BBU_GSTAT1 __REG(0x90600040)
-#define BBU_GSTAT2 __REG(0x90600044)
-#define BBU_GSTAT3 __REG(0x90600130)
-
-#endif /* ifndef __ASM_ARCH_REGSBBU_H */
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_REGSBOARDA9M9750_H
-#define __ASM_ARCH_REGSBOARDA9M9750_H
-
-#include <mach/hardware.h>
-
-#define FPGA_UARTA_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0))
-#define FPGA_UARTB_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x08)
-#define FPGA_UARTC_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x10)
-#define FPGA_UARTD_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x18)
-
-#define FPGA_IER __REG(NS9XXX_CSxSTAT_PHYS(0) + 0x50)
-#define FPGA_ISR __REG(NS9XXX_CSxSTAT_PHYS(0) + 0x60)
-
-#endif /* ifndef __ASM_ARCH_REGSBOARDA9M9750_H */
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/include/mach/regs-mem.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_REGSMEM_H
-#define __ASM_ARCH_REGSMEM_H
-
-#include <mach/hardware.h>
-
-/* Memory Module */
-
-/* Control register */
-#define MEM_CTRL __REG(0xa0700000)
-
-/* Status register */
-#define MEM_STAT __REG(0xa0700004)
-
-/* Configuration register */
-#define MEM_CONF __REG(0xa0700008)
-
-/* Dynamic Memory Control register */
-#define MEM_DMCTRL __REG(0xa0700020)
-
-/* Dynamic Memory Refresh Timer */
-#define MEM_DMRT __REG(0xa0700024)
-
-/* Dynamic Memory Read Configuration register */
-#define MEM_DMRC __REG(0xa0700028)
-
-/* Dynamic Memory Precharge Command Period (tRP) */
-#define MEM_DMPCP __REG(0xa0700030)
-
-/* Dynamic Memory Active to Precharge Command Period (tRAS) */
-#define MEM_DMAPCP __REG(0xa0700034)
-
-/* Dynamic Memory Self-Refresh Exit Time (tSREX) */
-#define MEM_DMSRET __REG(0xa0700038)
-
-/* Dynamic Memory Last Data Out to Active Time (tAPR) */
-#define MEM_DMLDOAT __REG(0xa070003c)
-
-/* Dynamic Memory Data-in to Active Command Time (tDAL or TAPW) */
-#define MEM_DMDIACT __REG(0xa0700040)
-
-/* Dynamic Memory Write Recovery Time (tWR, tDPL, tRWL, tRDL) */
-#define MEM_DMWRT __REG(0xa0700044)
-
-/* Dynamic Memory Active to Active Command Period (tRC) */
-#define MEM_DMAACP __REG(0xa0700048)
-
-/* Dynamic Memory Auto Refresh Period, and Auto Refresh to Active Command Period (tRFC) */
-#define MEM_DMARP __REG(0xa070004c)
-
-/* Dynamic Memory Exit Self-Refresh to Active Command (tXSR) */
-#define MEM_DMESRAC __REG(0xa0700050)
-
-/* Dynamic Memory Active Bank A to Active B Time (tRRD) */
-#define MEM_DMABAABT __REG(0xa0700054)
-
-/* Dynamic Memory Load Mode register to Active Command Time (tMRD) */
-#define MEM_DMLMACT __REG(0xa0700058)
-
-/* Static Memory Extended Wait */
-#define MEM_SMEW __REG(0xa0700080)
-
-/* Dynamic Memory Configuration Register x */
-#define MEM_DMCONF(x) __REG2(0xa0700100, (x) << 3)
-
-/* Dynamic Memory RAS and CAS Delay x */
-#define MEM_DMRCD(x) __REG2(0xa0700104, (x) << 3)
-
-/* Static Memory Configuration Register x */
-#define MEM_SMC(x) __REG2(0xa0700200, (x) << 3)
-
-/* Static Memory Configuration Register x: Write protect */
-#define MEM_SMC_PSMC __REGBIT(20)
-#define MEM_SMC_PSMC_OFF __REGVAL(MEM_SMC_PSMC, 0)
-#define MEM_SMC_PSMC_ON __REGVAL(MEM_SMC_PSMC, 1)
-
-/* Static Memory Configuration Register x: Buffer enable */
-#define MEM_SMC_BSMC __REGBIT(19)
-#define MEM_SMC_BSMC_OFF __REGVAL(MEM_SMC_BSMC, 0)
-#define MEM_SMC_BSMC_ON __REGVAL(MEM_SMC_BSMC, 1)
-
-/* Static Memory Configuration Register x: Extended Wait */
-#define MEM_SMC_EW __REGBIT(8)
-#define MEM_SMC_EW_OFF __REGVAL(MEM_SMC_EW, 0)
-#define MEM_SMC_EW_ON __REGVAL(MEM_SMC_EW, 1)
-
-/* Static Memory Configuration Register x: Byte lane state */
-#define MEM_SMC_PB __REGBIT(7)
-#define MEM_SMC_PB_0 __REGVAL(MEM_SMC_PB, 0)
-#define MEM_SMC_PB_1 __REGVAL(MEM_SMC_PB, 1)
-
-/* Static Memory Configuration Register x: Chip select polarity */
-#define MEM_SMC_PC __REGBIT(6)
-#define MEM_SMC_PC_AL __REGVAL(MEM_SMC_PC, 0)
-#define MEM_SMC_PC_AH __REGVAL(MEM_SMC_PC, 1)
-
-/* static memory configuration register x: page mode*/
-#define MEM_SMC_PM __REGBIT(3)
-#define MEM_SMC_PM_DIS __REGVAL(MEM_SMC_PM, 0)
-#define MEM_SMC_PM_ASYNC __REGVAL(MEM_SMC_PM, 1)
-
-/* static memory configuration register x: Memory width */
-#define MEM_SMC_MW __REGBITS(1, 0)
-#define MEM_SMC_MW_8 __REGVAL(MEM_SMC_MW, 0)
-#define MEM_SMC_MW_16 __REGVAL(MEM_SMC_MW, 1)
-#define MEM_SMC_MW_32 __REGVAL(MEM_SMC_MW, 2)
-
-/* Static Memory Write Enable Delay x */
-#define MEM_SMWED(x) __REG2(0xa0700204, (x) << 3)
-
-/* Static Memory Output Enable Delay x */
-#define MEM_SMOED(x) __REG2(0xa0700208, (x) << 3)
-
-/* Static Memory Read Delay x */
-#define MEM_SMRD(x) __REG2(0xa070020c, (x) << 3)
-
-/* Static Memory Page Mode Read Delay 0 */
-#define MEM_SMPMRD(x) __REG2(0xa0700210, (x) << 3)
-
-/* Static Memory Write Delay */
-#define MEM_SMWD(x) __REG2(0xa0700214, (x) << 3)
-
-/* Static Memory Turn Round Delay x */
-#define MEM_SWT(x) __REG2(0xa0700218, (x) << 3)
-
-#endif /* ifndef __ASM_ARCH_REGSMEM_H */
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_REGSSYSCOMMON_H
-#define __ASM_ARCH_REGSSYSCOMMON_H
-#include <mach/hardware.h>
-
-/* Interrupt Vector Address Register Level x */
-#define SYS_IVA(x) __REG2(0xa09000c4, (x))
-
-/* Interrupt Configuration registers */
-#define SYS_IC(x) __REG2(0xa0900144, (x))
-
-/* ISRADDR */
-#define SYS_ISRADDR __REG(0xa0900164)
-
-/* Interrupt Status Active */
-#define SYS_ISA __REG(0xa0900168)
-
-/* Interrupt Status Raw */
-#define SYS_ISR __REG(0xa090016c)
-
-#endif /* ifndef __ASM_ARCH_REGSSYSCOMMON_H */
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_REGSSYSNS9360_H
-#define __ASM_ARCH_REGSSYSNS9360_H
-
-#include <mach/hardware.h>
-
-/* System Control Module */
-
-/* AHB Arbiter Gen Configuration */
-#define SYS_AHBAGENCONF __REG(0xa0900000)
-
-/* BRC */
-#define SYS_BRC(x) __REG2(0xa0900004, (x))
-
-/* Timer x Reload Count register */
-#define SYS_TRC(x) __REG2(0xa0900044, (x))
-
-/* Timer x Read register */
-#define SYS_TR(x) __REG2(0xa0900084, (x))
-
-/* Timer Interrupt Status register */
-#define SYS_TIS __REG(0xa0900170)
-
-/* PLL Configuration register */
-#define SYS_PLL __REG(0xa0900188)
-
-/* PLL FS status */
-#define SYS_PLL_FS __REGBITS(24, 23)
-
-/* PLL ND status */
-#define SYS_PLL_ND __REGBITS(20, 16)
-
-/* PLL Configuration register: PLL SW change */
-#define SYS_PLL_SWC __REGBIT(15)
-#define SYS_PLL_SWC_NO __REGVAL(SYS_PLL_SWC, 0)
-#define SYS_PLL_SWC_YES __REGVAL(SYS_PLL_SWC, 1)
-
-/* Timer x Control register */
-#define SYS_TC(x) __REG2(0xa0900190, (x))
-
-/* Timer x Control register: Timer enable */
-#define SYS_TCx_TEN __REGBIT(15)
-#define SYS_TCx_TEN_DIS __REGVAL(SYS_TCx_TEN, 0)
-#define SYS_TCx_TEN_EN __REGVAL(SYS_TCx_TEN, 1)
-
-/* Timer x Control register: CPU debug mode */
-#define SYS_TCx_TDBG __REGBIT(10)
-#define SYS_TCx_TDBG_CONT __REGVAL(SYS_TCx_TDBG, 0)
-#define SYS_TCx_TDBG_STOP __REGVAL(SYS_TCx_TDBG, 1)
-
-/* Timer x Control register: Interrupt clear */
-#define SYS_TCx_INTC __REGBIT(9)
-#define SYS_TCx_INTC_UNSET __REGVAL(SYS_TCx_INTC, 0)
-#define SYS_TCx_INTC_SET __REGVAL(SYS_TCx_INTC, 1)
-
-/* Timer x Control register: Timer clock select */
-#define SYS_TCx_TLCS __REGBITS(8, 6)
-#define SYS_TCx_TLCS_CPU __REGVAL(SYS_TCx_TLCS, 0) /* CPU clock */
-#define SYS_TCx_TLCS_DIV2 __REGVAL(SYS_TCx_TLCS, 1) /* CPU clock / 2 */
-#define SYS_TCx_TLCS_DIV4 __REGVAL(SYS_TCx_TLCS, 2) /* CPU clock / 4 */
-#define SYS_TCx_TLCS_DIV8 __REGVAL(SYS_TCx_TLCS, 3) /* CPU clock / 8 */
-#define SYS_TCx_TLCS_DIV16 __REGVAL(SYS_TCx_TLCS, 4) /* CPU clock / 16 */
-#define SYS_TCx_TLCS_DIV32 __REGVAL(SYS_TCx_TLCS, 5) /* CPU clock / 32 */
-#define SYS_TCx_TLCS_DIV64 __REGVAL(SYS_TCx_TLCS, 6) /* CPU clock / 64 */
-#define SYS_TCx_TLCS_EXT __REGVAL(SYS_TCx_TLCS, 7)
-
-/* Timer x Control register: Timer mode */
-#define SYS_TCx_TM __REGBITS(5, 4)
-#define SYS_TCx_TM_IEE __REGVAL(SYS_TCx_TM, 0) /* Internal timer or external event */
-#define SYS_TCx_TM_ELL __REGVAL(SYS_TCx_TM, 1) /* External low-level, gated timer */
-#define SYS_TCx_TM_EHL __REGVAL(SYS_TCx_TM, 2) /* External high-level, gated timer */
-#define SYS_TCx_TM_CONCAT __REGVAL(SYS_TCx_TM, 3) /* Concatenate the lower timer. */
-
-/* Timer x Control register: Interrupt select */
-#define SYS_TCx_INTS __REGBIT(3)
-#define SYS_TCx_INTS_DIS __REGVAL(SYS_TCx_INTS, 0)
-#define SYS_TCx_INTS_EN __REGVAL(SYS_TCx_INTS, 1)
-
-/* Timer x Control register: Up/down select */
-#define SYS_TCx_UDS __REGBIT(2)
-#define SYS_TCx_UDS_UP __REGVAL(SYS_TCx_UDS, 0)
-#define SYS_TCx_UDS_DOWN __REGVAL(SYS_TCx_UDS, 1)
-
-/* Timer x Control register: 32- or 16-bit timer */
-#define SYS_TCx_TSZ __REGBIT(1)
-#define SYS_TCx_TSZ_16 __REGVAL(SYS_TCx_TSZ, 0)
-#define SYS_TCx_TSZ_32 __REGVAL(SYS_TCx_TSZ, 1)
-
-/* Timer x Control register: Reload enable */
-#define SYS_TCx_REN __REGBIT(0)
-#define SYS_TCx_REN_DIS __REGVAL(SYS_TCx_REN, 0)
-#define SYS_TCx_REN_EN __REGVAL(SYS_TCx_REN, 1)
-
-/* System Memory Chip Select x Dynamic Memory Base */
-#define SYS_SMCSDMB(x) __REG2(0xa09001d0, (x) << 1)
-
-/* System Memory Chip Select x Dynamic Memory Mask */
-#define SYS_SMCSDMM(x) __REG2(0xa09001d4, (x) << 1)
-
-/* System Memory Chip Select x Static Memory Base */
-#define SYS_SMCSSMB(x) __REG2(0xa09001f0, (x) << 1)
-
-/* System Memory Chip Select x Static Memory Base: Chip select x base */
-#define SYS_SMCSSMB_CSxB __REGBITS(31, 12)
-
-/* System Memory Chip Select x Static Memory Mask */
-#define SYS_SMCSSMM(x) __REG2(0xa09001f4, (x) << 1)
-
-/* System Memory Chip Select x Static Memory Mask: Chip select x mask */
-#define SYS_SMCSSMM_CSxM __REGBITS(31, 12)
-
-/* System Memory Chip Select x Static Memory Mask: Chip select x enable */
-#define SYS_SMCSSMM_CSEx __REGBIT(0)
-#define SYS_SMCSSMM_CSEx_DIS __REGVAL(SYS_SMCSSMM_CSEx, 0)
-#define SYS_SMCSSMM_CSEx_EN __REGVAL(SYS_SMCSSMM_CSEx, 1)
-
-/* General purpose, user-defined ID register */
-#define SYS_GENID __REG(0xa0900210)
-
-/* External Interrupt x Control register */
-#define SYS_EIC(x) __REG2(0xa0900214, (x))
-
-/* External Interrupt x Control register: Status */
-#define SYS_EIC_STS __REGBIT(3)
-
-/* External Interrupt x Control register: Clear */
-#define SYS_EIC_CLR __REGBIT(2)
-
-/* External Interrupt x Control register: Polarity */
-#define SYS_EIC_PLTY __REGBIT(1)
-#define SYS_EIC_PLTY_AH __REGVAL(SYS_EIC_PLTY, 0)
-#define SYS_EIC_PLTY_AL __REGVAL(SYS_EIC_PLTY, 1)
-
-/* External Interrupt x Control register: Level edge */
-#define SYS_EIC_LVEDG __REGBIT(0)
-#define SYS_EIC_LVEDG_LEVEL __REGVAL(SYS_EIC_LVEDG, 0)
-#define SYS_EIC_LVEDG_EDGE __REGVAL(SYS_EIC_LVEDG, 1)
-
-#endif /* ifndef __ASM_ARCH_REGSSYSNS9360_H */
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/include/mach/system.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/proc-fns.h>
-#include <mach/processor.h>
-#include <mach/processor-ns9360.h>
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-#ifdef CONFIG_PROCESSOR_NS9360
- if (processor_is_ns9360())
- ns9360_reset(mode);
- else
-#endif
- BUG();
-
- BUG();
-}
-
-#endif /* ifndef __ASM_ARCH_SYSTEM_H */
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/include/mach/timex.h
- *
- * Copyright (C) 2005-2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/*
- * value for CLOCK_TICK_RATE stolen from arch/arm/mach-s3c2410/include/mach/timex.h.
- * See there for an explanation.
- */
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* ifndef __ASM_ARCH_TIMEX_H */
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/include/mach/uncompress.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <linux/io.h>
-
-#define __REG(x) ((void __iomem __force *)(x))
-
-static void putc_dummy(char c, void __iomem *base)
-{
- /* nothing */
-}
-
-static int timeout;
-
-static void putc_ns9360(char c, void __iomem *base)
-{
- do {
- if (timeout)
- --timeout;
-
- if (__raw_readl(base + 8) & (1 << 3)) {
- __raw_writeb(c, base + 16);
- timeout = 0x10000;
- break;
- }
- } while (timeout);
-}
-
-static void putc_a9m9750dev(char c, void __iomem *base)
-{
- do {
- if (timeout)
- --timeout;
-
- if (__raw_readb(base + 5) & (1 << 5)) {
- __raw_writeb(c, base);
- timeout = 0x10000;
- break;
- }
- } while (timeout);
-
-}
-
-static void putc_ns921x(char c, void __iomem *base)
-{
- do {
- if (timeout)
- --timeout;
-
- if (!(__raw_readl(base) & (1 << 11))) {
- __raw_writeb(c, base + 0x0028);
- timeout = 0x10000;
- break;
- }
- } while (timeout);
-}
-
-#define MSCS __REG(0xA0900184)
-
-#define NS9360_UARTA __REG(0x90200040)
-#define NS9360_UARTB __REG(0x90200000)
-#define NS9360_UARTC __REG(0x90300000)
-#define NS9360_UARTD __REG(0x90300040)
-
-#define NS9360_UART_ENABLED(base) \
- (__raw_readl(NS9360_UARTA) & (1 << 31))
-
-#define A9M9750DEV_UARTA __REG(0x40000000)
-
-#define NS921XSYS_CLOCK __REG(0xa090017c)
-#define NS921X_UARTA __REG(0x90010000)
-#define NS921X_UARTB __REG(0x90018000)
-#define NS921X_UARTC __REG(0x90020000)
-#define NS921X_UARTD __REG(0x90028000)
-
-#define NS921X_UART_ENABLED(base) \
- (__raw_readl((base) + 0x1000) & (1 << 29))
-
-static void autodetect(void (**putc)(char, void __iomem *), void __iomem **base)
-{
- timeout = 0x10000;
- if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x00) {
- /* ns9360 or ns9750 */
- if (NS9360_UART_ENABLED(NS9360_UARTA)) {
- *putc = putc_ns9360;
- *base = NS9360_UARTA;
- return;
- } else if (NS9360_UART_ENABLED(NS9360_UARTB)) {
- *putc = putc_ns9360;
- *base = NS9360_UARTB;
- return;
- } else if (NS9360_UART_ENABLED(NS9360_UARTC)) {
- *putc = putc_ns9360;
- *base = NS9360_UARTC;
- return;
- } else if (NS9360_UART_ENABLED(NS9360_UARTD)) {
- *putc = putc_ns9360;
- *base = NS9360_UARTD;
- return;
- } else if (__raw_readl(__REG(0xa09001f4)) == 0xfffff001) {
- *putc = putc_a9m9750dev;
- *base = A9M9750DEV_UARTA;
- return;
- }
- } else if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x02) {
- /* ns921x */
- u32 clock = __raw_readl(NS921XSYS_CLOCK);
-
- if ((clock & (1 << 1)) &&
- NS921X_UART_ENABLED(NS921X_UARTA)) {
- *putc = putc_ns921x;
- *base = NS921X_UARTA;
- return;
- } else if ((clock & (1 << 2)) &&
- NS921X_UART_ENABLED(NS921X_UARTB)) {
- *putc = putc_ns921x;
- *base = NS921X_UARTB;
- return;
- } else if ((clock & (1 << 3)) &&
- NS921X_UART_ENABLED(NS921X_UARTC)) {
- *putc = putc_ns921x;
- *base = NS921X_UARTC;
- return;
- } else if ((clock & (1 << 4)) &&
- NS921X_UART_ENABLED(NS921X_UARTD)) {
- *putc = putc_ns921x;
- *base = NS921X_UARTD;
- return;
- }
- }
-
- *putc = putc_dummy;
-}
-
-void (*myputc)(char, void __iomem *);
-void __iomem *base;
-
-static void putc(char c)
-{
- myputc(c, base);
-}
-
-static void arch_decomp_setup(void)
-{
- autodetect(&myputc, &base);
-}
-#define arch_decomp_wdog()
-
-static void flush(void)
-{
- /* nothing */
-}
-
-#endif /* ifndef __ASM_ARCH_UNCOMPRESS_H */
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/include/mach/vmalloc.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END (0xf0000000UL)
-
-#endif /* ifndef __ASM_ARCH_VMALLOC_H */
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/irq.c
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/io.h>
-#include <asm/mach/irq.h>
-#include <mach/regs-sys-common.h>
-#include <mach/irqs.h>
-#include <mach/board.h>
-
-#include "generic.h"
-
-/* simple interrupt prio table: prio(x) < prio(y) <=> x < y */
-#define irq2prio(i) (i)
-#define prio2irq(p) (p)
-
-static void ns9xxx_mask_irq(struct irq_data *d)
-{
- /* XXX: better use cpp symbols */
- int prio = irq2prio(d->irq);
- u32 ic = __raw_readl(SYS_IC(prio / 4));
- ic &= ~(1 << (7 + 8 * (3 - (prio & 3))));
- __raw_writel(ic, SYS_IC(prio / 4));
-}
-
-static void ns9xxx_eoi_irq(struct irq_data *d)
-{
- __raw_writel(0, SYS_ISRADDR);
-}
-
-static void ns9xxx_unmask_irq(struct irq_data *d)
-{
- /* XXX: better use cpp symbols */
- int prio = irq2prio(d->irq);
- u32 ic = __raw_readl(SYS_IC(prio / 4));
- ic |= 1 << (7 + 8 * (3 - (prio & 3)));
- __raw_writel(ic, SYS_IC(prio / 4));
-}
-
-static struct irq_chip ns9xxx_chip = {
- .irq_eoi = ns9xxx_eoi_irq,
- .irq_mask = ns9xxx_mask_irq,
- .irq_unmask = ns9xxx_unmask_irq,
-};
-
-void __init ns9xxx_init_irq(void)
-{
- int i;
-
- /* disable all IRQs */
- for (i = 0; i < 8; ++i)
- __raw_writel(prio2irq(4 * i) << 24 |
- prio2irq(4 * i + 1) << 16 |
- prio2irq(4 * i + 2) << 8 |
- prio2irq(4 * i + 3),
- SYS_IC(i));
-
- for (i = 0; i < 32; ++i)
- __raw_writel(prio2irq(i), SYS_IVA(i));
-
- for (i = 0; i <= 31; ++i) {
- irq_set_chip_and_handler(i, &ns9xxx_chip, handle_fasteoi_irq);
- set_irq_flags(i, IRQF_VALID);
- irq_set_status_flags(i, IRQ_LEVEL);
- }
-}
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/processor-ns9360.h>
-
-#include "board-a9m9750dev.h"
-#include "generic.h"
-
-static void __init mach_cc9p9360dev_map_io(void)
-{
- ns9360_map_io();
- board_a9m9750dev_map_io();
-}
-
-static void __init mach_cc9p9360dev_init_irq(void)
-{
- ns9xxx_init_irq();
- board_a9m9750dev_init_irq();
-}
-
-static void __init mach_cc9p9360dev_init_machine(void)
-{
- ns9xxx_init_machine();
- board_a9m9750dev_init_machine();
-}
-
-MACHINE_START(CC9P9360DEV, "Digi ConnectCore 9P 9360 on an A9M9750 Devboard")
- .map_io = mach_cc9p9360dev_map_io,
- .init_irq = mach_cc9p9360dev_init_irq,
- .init_machine = mach_cc9p9360dev_init_machine,
- .timer = &ns9360_timer,
- .boot_params = 0x100,
-MACHINE_END
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/mach-cc9p9360js.c
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/processor-ns9360.h>
-
-#include "board-jscc9p9360.h"
-#include "generic.h"
-
-static void __init mach_cc9p9360js_init_machine(void)
-{
- ns9xxx_init_machine();
- board_jscc9p9360_init_machine();
-}
-
-MACHINE_START(CC9P9360JS, "Digi ConnectCore 9P 9360 on an JSCC9P9360 Devboard")
- .map_io = ns9360_map_io,
- .init_irq = ns9xxx_init_irq,
- .init_machine = mach_cc9p9360js_init_machine,
- .timer = &ns9360_timer,
- .boot_params = 0x100,
-MACHINE_END
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/plat-serial8250.c
- *
- * Copyright (C) 2008 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/slab.h>
-
-#include <mach/regs-board-a9m9750dev.h>
-#include <mach/board.h>
-
-#define DRIVER_NAME "serial8250"
-
-static int __init ns9xxx_plat_serial8250_init(void)
-{
- struct plat_serial8250_port *pdata;
- struct platform_device *pdev;
- int ret = -ENOMEM;
- int i;
-
- if (!board_is_a9m9750dev())
- return -ENODEV;
-
- pdev = platform_device_alloc(DRIVER_NAME, 0);
- if (!pdev)
- goto err;
-
- pdata = kzalloc(5 * sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- goto err;
-
- pdev->dev.platform_data = pdata;
-
- pdata[0].iobase = FPGA_UARTA_BASE;
- pdata[1].iobase = FPGA_UARTB_BASE;
- pdata[2].iobase = FPGA_UARTC_BASE;
- pdata[3].iobase = FPGA_UARTD_BASE;
-
- for (i = 0; i < 4; ++i) {
- pdata[i].membase = (void __iomem *)pdata[i].iobase;
- pdata[i].mapbase = pdata[i].iobase;
- pdata[i].iotype = UPIO_MEM;
- pdata[i].uartclk = 18432000;
- pdata[i].flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
- }
-
- pdata[0].irq = IRQ_FPGA_UARTA;
- pdata[1].irq = IRQ_FPGA_UARTB;
- pdata[2].irq = IRQ_FPGA_UARTC;
- pdata[3].irq = IRQ_FPGA_UARTD;
-
- ret = platform_device_add(pdev);
- if (ret) {
-err:
- platform_device_put(pdev);
-
- printk(KERN_WARNING "Could not add %s (errno=%d)\n",
- DRIVER_NAME, ret);
- }
-
- return 0;
-}
-
-arch_initcall(ns9xxx_plat_serial8250_init);
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/processor-ns9360.c
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/io.h>
-#include <linux/kernel.h>
-
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <mach/processor-ns9360.h>
-#include <mach/regs-sys-ns9360.h>
-
-void ns9360_reset(char mode)
-{
- u32 reg;
-
- reg = __raw_readl(SYS_PLL) >> 16;
- REGSET(reg, SYS_PLL, SWC, YES);
- __raw_writel(reg, SYS_PLL);
-}
-
-#define CRYSTAL 29491200 /* Hz */
-unsigned long ns9360_systemclock(void)
-{
- u32 pll = __raw_readl(SYS_PLL);
- return CRYSTAL * (REGGETIM(pll, SYS_PLL, ND) + 1)
- >> REGGETIM(pll, SYS_PLL, FS);
-}
-
-static struct map_desc ns9360_io_desc[] __initdata = {
- { /* BBus */
- .virtual = io_p2v(0x90000000),
- .pfn = __phys_to_pfn(0x90000000),
- .length = 0x00700000,
- .type = MT_DEVICE,
- }, { /* AHB */
- .virtual = io_p2v(0xa0100000),
- .pfn = __phys_to_pfn(0xa0100000),
- .length = 0x00900000,
- .type = MT_DEVICE,
- },
-};
-
-void __init ns9360_map_io(void)
-{
- iotable_init(ns9360_io_desc, ARRAY_SIZE(ns9360_io_desc));
-}
+++ /dev/null
-/*
- * arch/arm/mach-ns9xxx/time-ns9360.c
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/jiffies.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/stringify.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-
-#include <mach/processor-ns9360.h>
-#include <mach/regs-sys-ns9360.h>
-#include <mach/irqs.h>
-#include <mach/system.h>
-#include "generic.h"
-
-#define TIMER_CLOCKSOURCE 0
-#define TIMER_CLOCKEVENT 1
-static u32 latch;
-
-static cycle_t ns9360_clocksource_read(struct clocksource *cs)
-{
- return __raw_readl(SYS_TR(TIMER_CLOCKSOURCE));
-}
-
-static struct clocksource ns9360_clocksource = {
- .name = "ns9360-timer" __stringify(TIMER_CLOCKSOURCE),
- .rating = 300,
- .read = ns9360_clocksource_read,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static void ns9360_clockevent_setmode(enum clock_event_mode mode,
- struct clock_event_device *clk)
-{
- u32 tc = __raw_readl(SYS_TC(TIMER_CLOCKEVENT));
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- __raw_writel(latch, SYS_TRC(TIMER_CLOCKEVENT));
- REGSET(tc, SYS_TCx, REN, EN);
- REGSET(tc, SYS_TCx, INTS, EN);
- REGSET(tc, SYS_TCx, TEN, EN);
- break;
-
- case CLOCK_EVT_MODE_ONESHOT:
- REGSET(tc, SYS_TCx, REN, DIS);
- REGSET(tc, SYS_TCx, INTS, EN);
-
- /* fall through */
-
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- case CLOCK_EVT_MODE_RESUME:
- default:
- REGSET(tc, SYS_TCx, TEN, DIS);
- break;
- }
-
- __raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT));
-}
-
-static int ns9360_clockevent_setnextevent(unsigned long evt,
- struct clock_event_device *clk)
-{
- u32 tc = __raw_readl(SYS_TC(TIMER_CLOCKEVENT));
-
- if (REGGET(tc, SYS_TCx, TEN)) {
- REGSET(tc, SYS_TCx, TEN, DIS);
- __raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT));
- }
-
- REGSET(tc, SYS_TCx, TEN, EN);
-
- __raw_writel(evt, SYS_TRC(TIMER_CLOCKEVENT));
-
- __raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT));
-
- return 0;
-}
-
-static struct clock_event_device ns9360_clockevent_device = {
- .name = "ns9360-timer" __stringify(TIMER_CLOCKEVENT),
- .shift = 20,
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .set_mode = ns9360_clockevent_setmode,
- .set_next_event = ns9360_clockevent_setnextevent,
-};
-
-static irqreturn_t ns9360_clockevent_handler(int irq, void *dev_id)
-{
- int timerno = irq - IRQ_NS9360_TIMER0;
- u32 tc;
-
- struct clock_event_device *evt = &ns9360_clockevent_device;
-
- /* clear irq */
- tc = __raw_readl(SYS_TC(timerno));
- if (REGGET(tc, SYS_TCx, REN) == SYS_TCx_REN_DIS) {
- REGSET(tc, SYS_TCx, TEN, DIS);
- __raw_writel(tc, SYS_TC(timerno));
- }
- REGSET(tc, SYS_TCx, INTC, SET);
- __raw_writel(tc, SYS_TC(timerno));
- REGSET(tc, SYS_TCx, INTC, UNSET);
- __raw_writel(tc, SYS_TC(timerno));
-
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction ns9360_clockevent_action = {
- .name = "ns9360-timer" __stringify(TIMER_CLOCKEVENT),
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = ns9360_clockevent_handler,
-};
-
-static void __init ns9360_timer_init(void)
-{
- int tc;
-
- tc = __raw_readl(SYS_TC(TIMER_CLOCKSOURCE));
- if (REGGET(tc, SYS_TCx, TEN)) {
- REGSET(tc, SYS_TCx, TEN, DIS);
- __raw_writel(tc, SYS_TC(TIMER_CLOCKSOURCE));
- }
-
- __raw_writel(0, SYS_TRC(TIMER_CLOCKSOURCE));
-
- REGSET(tc, SYS_TCx, TEN, EN);
- REGSET(tc, SYS_TCx, TDBG, STOP);
- REGSET(tc, SYS_TCx, TLCS, CPU);
- REGSET(tc, SYS_TCx, TM, IEE);
- REGSET(tc, SYS_TCx, INTS, DIS);
- REGSET(tc, SYS_TCx, UDS, UP);
- REGSET(tc, SYS_TCx, TSZ, 32);
- REGSET(tc, SYS_TCx, REN, EN);
-
- __raw_writel(tc, SYS_TC(TIMER_CLOCKSOURCE));
-
- clocksource_register_hz(&ns9360_clocksource, ns9360_cpuclock());
-
- latch = SH_DIV(ns9360_cpuclock(), HZ, 0);
-
- tc = __raw_readl(SYS_TC(TIMER_CLOCKEVENT));
- REGSET(tc, SYS_TCx, TEN, DIS);
- REGSET(tc, SYS_TCx, TDBG, STOP);
- REGSET(tc, SYS_TCx, TLCS, CPU);
- REGSET(tc, SYS_TCx, TM, IEE);
- REGSET(tc, SYS_TCx, INTS, DIS);
- REGSET(tc, SYS_TCx, UDS, DOWN);
- REGSET(tc, SYS_TCx, TSZ, 32);
- REGSET(tc, SYS_TCx, REN, EN);
- __raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT));
-
- ns9360_clockevent_device.mult = div_sc(ns9360_cpuclock(),
- NSEC_PER_SEC, ns9360_clockevent_device.shift);
- ns9360_clockevent_device.max_delta_ns =
- clockevent_delta2ns(-1, &ns9360_clockevent_device);
- ns9360_clockevent_device.min_delta_ns =
- clockevent_delta2ns(1, &ns9360_clockevent_device);
-
- ns9360_clockevent_device.cpumask = cpumask_of(0);
- clockevents_register_device(&ns9360_clockevent_device);
-
- setup_irq(IRQ_NS9360_TIMER0 + TIMER_CLOCKEVENT,
- &ns9360_clockevent_action);
-}
-
-struct sys_timer ns9360_timer = {
- .init = ns9360_timer_init,
-};