config ARCH_SUPPORTS_DEBUG_PAGEALLOC
def_bool y
+config PPC_ADV_DEBUG_REGS
+ bool
+ depends on 40x || BOOKE
+ default y
+
+config PPC_ADV_DEBUG_IACS
+ int
+ depends on PPC_ADV_DEBUG_REGS
+ default 4 if 44x
+ default 2
+
+config PPC_ADV_DEBUG_DACS
+ int
+ depends on PPC_ADV_DEBUG_REGS
+ default 2
+
+config PPC_ADV_DEBUG_DVCS
+ int
+ depends on PPC_ADV_DEBUG_REGS
+ default 2 if 44x
+ default 0
+
+config PPC_ADV_DEBUG_DAC_RANGE
+ bool
+ depends on PPC_ADV_DEBUG_REGS && 44x
+ default y
+
source "init/Kconfig"
source "kernel/Kconfig.freezer"
atomic_set(&kgdb_cpu_doing_single_step, -1);
/* set the trace bit if we're stepping */
if (remcom_in_buffer[0] == 's') {
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
mtspr(SPRN_DBCR0,
mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
linux_regs->msr |= MSR_DE;
#include <asm/uaccess.h>
#include <asm/system.h>
-#ifdef CONFIG_BOOKE
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
#define MSR_SINGLESTEP (MSR_DE)
#else
#define MSR_SINGLESTEP (MSR_SE)
* like Decrementer or External Interrupt */
regs->msr &= ~MSR_EE;
regs->msr |= MSR_SINGLESTEP;
-#ifdef CONFIG_BOOKE
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
regs->msr &= ~MSR_CE;
mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
#endif
return;
/* Clear the DAC and struct entries. One shot trigger */
-#if defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R | DBSR_DAC1W
| DBCR0_IDM));
#endif
return ppc_md.set_dabr(dabr);
/* XXX should we have a CPU_FTR_HAS_DABR ? */
-#if defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
mtspr(SPRN_DAC1, dabr);
#elif defined(CONFIG_PPC_BOOK3S)
mtspr(SPRN_DABR, dabr);
#endif /* CONFIG_SMP */
-#if defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
/* If new thread DAC (HW breakpoint) is the same then leave it */
if (new->thread.dabr)
set_dabr(new->thread.dabr);
printk(" CR: %08lx XER: %08lx\n", regs->ccr, regs->xer);
trap = TRAP(regs);
if (trap == 0x300 || trap == 0x600)
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
printk("DEAR: "REG", ESR: "REG"\n", regs->dar, regs->dsisr);
#else
printk("DAR: "REG", DSISR: "REG"\n", regs->dar, regs->dsisr);
current->thread.dabr = 0;
set_dabr(0);
-#if defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W);
#endif
}
/*
* Set of msr bits that gdb can change on behalf of a process.
*/
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
#define MSR_DEBUGCHANGE 0
#else
#define MSR_DEBUGCHANGE (MSR_SE | MSR_BE)
struct pt_regs *regs = task->thread.regs;
if (regs != NULL) {
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
task->thread.dbcr0 &= ~DBCR0_BT;
task->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC;
regs->msr |= MSR_DE;
struct pt_regs *regs = task->thread.regs;
if (regs != NULL) {
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
task->thread.dbcr0 &= ~DBCR0_IC;
task->thread.dbcr0 = DBCR0_IDM | DBCR0_BT;
regs->msr |= MSR_DE;
struct pt_regs *regs = task->thread.regs;
if (regs != NULL) {
-#if defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
/* If DAC don't clear DBCRO_IDM or MSR_DE */
if (task->thread.dabr)
task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT);
task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM);
regs->msr &= ~MSR_DE;
}
-#elif defined(CONFIG_40x)
- task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM);
- regs->msr &= ~MSR_DE;
#else
regs->msr &= ~(MSR_SE | MSR_BE);
#endif
if ((data & ~0x7UL) >= TASK_SIZE)
return -EIO;
-#ifndef CONFIG_BOOKE
+#ifndef CONFIG_PPC_ADV_DEBUG_REGS
/* For processors using DABR (i.e. 970), the bottom 3 bits are flags.
* It was assumed, on previous implementations, that 3 bits were
/* Move contents to the DABR register */
task->thread.dabr = data;
-#endif
-#if defined(CONFIG_BOOKE)
+#else /* CONFIG_PPC_ADV_DEBUG_REGS */
/* As described above, it was assumed 3 bits were passed with the data
* address, but we will assume only the mode bits will be passed
task->thread.dbcr0 |= DBSR_DAC1W;
task->thread.regs->msr |= MSR_DE;
-#endif
+#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
return 0;
}
*/
if (current->thread.dabr) {
set_dabr(current->thread.dabr);
-#if defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
mtspr(SPRN_DBCR0, current->thread.dbcr0);
#endif
}
int i;
unsigned char tmp;
unsigned long new_msr = regs->msr;
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
unsigned long new_dbcr0 = current->thread.dbcr0;
#endif
return -EFAULT;
switch (op.dbg_type) {
case SIG_DBG_SINGLE_STEPPING:
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
if (op.dbg_value) {
new_msr |= MSR_DE;
new_dbcr0 |= (DBCR0_IDM | DBCR0_IC);
#endif
break;
case SIG_DBG_BRANCH_TRACING:
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
return -EINVAL;
#else
if (op.dbg_value)
failure is a problem, anyway, and it's very unlikely unless
the user is really doing something wrong. */
regs->msr = new_msr;
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
current->thread.dbcr0 = new_dbcr0;
#endif
return 0;
}
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
/* On 4xx, the reason for the machine check or program exception
is in the ESR. */
#define get_reason(regs) ((regs)->dsisr)
}
#endif /* CONFIG_8xx */
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
{
do_dabr(regs, mfspr(SPRN_DAC1), debug_status);
}
}
-#endif /* CONFIG_4xx || CONFIG_BOOKE */
+#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
#if !defined(CONFIG_TAU_INT)
void TAUException(struct pt_regs *regs)