dt-bindings: usb: renesas_usbhs: add clock-names property

R-Car Gen3 needs to enable clocks of both host and peripheral.
Otherwise, other side device cannot work correctly. So, this patch
adds a property of clock-names for R-Car Gen3 as an optional.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
index 43960faf5a88c6c1c1c3f34e11d9ceef7d5e40cf..f19ec72d6a2eeb12532a2c403638086164297a28 100644 (file)
--- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
@@ -25,7 +25,11 @@ Required properties:
 
   - reg: Base address and length of the register for the USBHS
   - interrupts: Interrupt specifier for the USBHS
-  - clocks: A list of phandle + clock specifier pairs
+  - clocks: A list of phandle + clock specifier pairs.
+           - In case of "renesas,rcar-gen3-usbhs", two clocks are required.
+             First clock should be peripheral and second one should be host.
+           - In case of except above, one clock is required. First clock
+             should be peripheral.
 
 Optional properties:
   - renesas,buswait: Integer to use BUSWAIT register