+++ /dev/null
-#
-# Copyright (C) 2007-2011 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ahcpd
-PKG_VERSION:=0.53
-PKG_RELEASE:=2
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=http://www.pps.univ-paris-diderot.fr/~jch/software/files/
-PKG_MD5SUM:=a1a610bf20965aa522cd766bf3d5829a
-
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ahcpd
- SECTION:=net
- CATEGORY:=Network
- TITLE:=Ad-Hoc Configuration Protocol daemon
- URL:=http://www.pps.univ-paris-diderot.fr/~jch/software/ahcp/
- MAINTAINER:=Gabriel Kerneis <kerneis@pps.univ-paris-diderot.fr>
- DEPENDS:=+kmod-ipv6 +ip +librt
-endef
-
-define Package/ahcpd/description
- Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
- Configuration Protocol (AHCP). AHCP is designed for wireless mesh
- networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
- also be used on wired networks.
-endef
-
-define Package/ahcpd/conffiles
-/etc/config/ahcpd
-endef
-
-define Package/ahcpd/install
- $(INSTALL_DIR) $(1)/usr/bin
- $(INSTALL_DIR) $(1)/etc/ahcp
- $(INSTALL_BIN) $(PKG_BUILD_DIR)/ahcp-config.sh $(1)/etc/ahcp/
- $(INSTALL_DIR) $(1)/usr/sbin
- $(INSTALL_BIN) $(PKG_BUILD_DIR)/ahcpd $(1)/usr/sbin/
- $(INSTALL_DIR) $(1)/etc/config
- $(INSTALL_CONF) ./files/ahcpd.config $(1)/etc/config/ahcpd
- $(INSTALL_DIR) $(1)/etc/init.d
- $(INSTALL_BIN) ./files/ahcpd.init $(1)/etc/init.d/ahcpd
-endef
-
-$(eval $(call BuildPackage,ahcpd))
+++ /dev/null
-package ahcpd
-
-config ahcpd
- # Choose ahcp mode: client (default), server or forwarder
- ## option 'mode' 'client'
- # Uncomment the following lines to enable ahcpd on the desired
- # interfaces.
- ## list 'interface' 'lan'
- ## list 'interface' 'wlan'
-
- # The following only makes sense in 'server' mode.
- # Tweak to suit your needs.
- ## list 'prefix' 'fde6:20f5:c9ac:358::/64'
- ## list 'prefix' '192.168.4.128/25'
- ## list 'name_server' 'fde6:20f5:c9ac:358::1'
- ## list 'name_server' '192.168.4.1'
- ## list 'ntp_server' '192.168.4.2'
- ## option 'lease_dir' '/var/lib/leases'
-
- # option 'id_file' '/var/lib/ahcp-unique-id'
- # option 'log_file' '/var/log/ahcpd.log'
- # The configuration file is not necessary since you can configure
- # everything from this file. But still, you might prefer using it.
- ## option 'conf_file' '/etc/ahcp/ahcp.conf'
-
- # option 'multicast_address' 'ff02::cca6:c0f9:e182:5359'
- # option 'port' '5359'
- # option 'ipv4_only' 'false'
- # option 'ipv6_only' 'false'
- # option 'lease_time' '3666'
- # option 'debug' '1'
-
+++ /dev/null
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2007-2011 OpenWrt.org
-
-START=71
-
-SERVICE_USE_PID=1
-
-EXTRA_COMMANDS="status"
-EXTRA_HELP=" status Print ahcpd's status to the log file."
-
-append_bool() {
- local section="$1"
- local option="$2"
- local value="$3"
- local _loctmp
- config_get_bool _loctmp "$section" "$option" 0
- [ "$_loctmp" -gt 0 ] && append args "$value"
-}
-
-append_parm() {
- local section="$1"
- local option="$2"
- local switch="$3"
- local _loctmp
- config_get _loctmp "$section" "$option"
- [ -z "$_loctmp" ] && return 0
- append args "$switch $_loctmp"
-}
-
-append_stmt() {
- local name="$1"
- local switch="$2"
- append args "-C '$switch $name'"
-}
-
-append_opt_stmt() {
- local section="$1"
- local option="$2"
- local switch="$3"
- local _loctmp
- config_get _loctmp "$section" "$option"
- [ -z "$_loctmp" ] && return 0
- append args "-C '$switch $_loctmp'"
-}
-
-ahcp_addif() {
- local ifname=$(uci_get_state network "$1" ifname "$1")
- append interfaces "$ifname"
-}
-
-ahcp_server() {
- local cfg="$1"
-
- append_opt_stmt "$cfg" 'mode' 'mode'
- append_opt_stmt "$cfg" 'lease_dir' 'lease-dir'
- config_list_foreach "$cfg" 'prefix' append_stmt 'prefix'
- config_list_foreach "$cfg" 'name_server' append_stmt 'name-server'
- config_list_foreach "$cfg" 'ntp_server' append_stmt 'ntp-server'
-
- append_parm "$cfg" 'id_file' '-i'
- append_parm "$cfg" 'log_file' '-L'
-}
-
-ahcp_config() {
- local cfg="$1"
- local interface
- local _loctmp
-
- config_list_foreach "$cfg" 'interface' ahcp_addif
-
- # Add interfaces with "option proto ahcp" in /etc/config/network
- # (only for client mode)
- config_get _loctmp "$cfg" "mode"
- if [ -z "$_loctmp" -o "$_loctmp" = "client" ]; then
- for interface in $(uci -P /var/state show network|grep proto=ahcp|cut -d. -f2); do
- ahcp_addif $interface
- done
- fi
-
- append_bool "$cfg" 'ipv4_only' '-4'
- append_bool "$cfg" 'ipv6_only' '-6'
- append_bool "$cfg" 'no_dns' '-N'
-
- append_parm "$cfg" 'multicast_address' '-m'
- append_parm "$cfg" 'port' '-p'
- append_parm "$cfg" 'lease_time' '-t'
- append_parm "$cfg" 'debug' '-d'
- append_parm "$cfg" 'conf_file' '-c'
- append_parm "$cfg" 'script' '-s'
-}
-
-start() {
- mkdir -p /var/lib
- config_load ahcpd
- unset args
- unset interfaces
- config_foreach ahcp_config ahcpd
- config_foreach ahcp_server ahcpd
- [ -z "$interfaces" ] && return 0
- eval "service_start /usr/sbin/ahcpd -D $args $interfaces"
-}
-
-stop() {
- service_stop /usr/sbin/ahcpd
-}
-
-status() {
- SERVICE_SIG="USR1" service_signal /usr/sbin/ahcpd
-}
+++ /dev/null
-#
-# Copyright (C) 2007-2009 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=babeld
-PKG_VERSION:=1.4.2
-PKG_RELEASE:=1
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=http://www.pps.univ-paris-diderot.fr/~jch/software/files/
-PKG_MD5SUM:=a48e8129f221f66640ae1ccf73190991
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/babeld
- SECTION:=net
- CATEGORY:=Network
- SUBMENU:=Routing and Redirection
- TITLE:=A loop-free distance-vector routing protocol
- URL:=http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
- MAINTAINER:=Gabriel Kerneis <kerneis@pps.univ-paris-diderot.fr>
- DEPENDS:=+kmod-ipv6 +librt
-endef
-
-define Package/babeld/description
- Babel is a loop-avoiding distance-vector routing protocol roughly based
- on DSDV and AODV, but with provisions for link cost estimation and
- redistribution of routes from other routing protocols.
- While it is optimised for wireless mesh networks, Babel will also work
- efficiently on wired networks. It will generate between 1.2 and 2.4 times
- the amount of routing traffic that RIPng would generate, while
- never counting to infinity.
-endef
-
-define Package/babeld/conffiles
-/etc/babeld.conf
-/etc/config/babeld
-endef
-
-MAKE_FLAGS+= \
- CFLAGS="$(TARGET_CFLAGS)" \
-
-define Package/babeld/install
- $(INSTALL_DIR) $(1)/usr/sbin
- $(INSTALL_BIN) $(PKG_BUILD_DIR)/babeld $(1)/usr/sbin/
- $(INSTALL_DIR) $(1)/etc
- $(INSTALL_CONF) ./files/babeld.conf $(1)/etc/
- $(INSTALL_DIR) $(1)/etc/config
- $(INSTALL_CONF) ./files/babeld.config $(1)/etc/config/babeld
- $(INSTALL_DIR) $(1)/etc/init.d
- $(INSTALL_BIN) ./files/babeld.init $(1)/etc/init.d/babeld
-endef
-
-$(eval $(call BuildPackage,babeld))
+++ /dev/null
-# babel config file
-# Copyright (C) 2008-2010 Juliusz Chroboczek, L. Aaron Kaplan
-# <jch@pps.univ-paris-diderot.fr> , <aaron@lo-res.org>
-#
-# This config file simply documents sample entries.
-# "redistribute" means: redistribute routes from other routing protocols
-# into babel. "local" means addresses assigned to local interfaces.
-#
-# You do not need to edit this file: you can use /etc/config/babeld
-# instead (sections "interface" and "filter"). Both files can be used
-# simultaneously (the rules of this file are executed first).
-
-# the default rules are:
-#
-## redistribute local
-## redistribute deny
-#
-# this says, redistribute local addresses but no other routes
-
-
-# redistribute IPv4 default route into babel
-## redistribute local ip 0.0.0.0/0 le 0 metric 128
-
-# same but for IPv6
-## redistribute local ip ::/0 le 0 metric 128
-
-
-# don't redistribute all local addresses, only selected ones
-# after the first line, the "deny" rules kicks in. After the "deny"
-# no redistribute local rules are going to match
-## redistribute local ip 192.160.4.0/24
-## redistribute local deny
-
-
-# Babel refuses to redistribute routes with a protocol number of "boot";
-# this is standard practice, and means that you cannot easily
-# redistribute the default route installed by dhcp. It is however
-# possible to redistribute such route by explicitly specifying "proto 3"
-# on the redistribute line.
-## redistribute ip 0.0.0.0/0 le 0 proto 3 metric 128
+++ /dev/null
-package babeld
-
-config general
- # option 'multicast_address' 'ff02:0:0:0:0:0:1:6'
- # option 'port' '6696'
- # option 'state_file' '/var/lib/babel-state'
- # option 'hello_interval' '4'
- # option 'wired_hello_interval' '20'
- # option 'diversity' '0,128'
- # option 'smoothing_half_time' '4'
- # option 'kernel_priority' '0'
- # Do not use this option unless you know what you are doing, as it can
- # cause persistent route flapping.
- ## option 'duplication_priority' '0'
- # option 'carrier_sense' 'false'
- # option 'assume_wireless' 'false'
- # option 'no_split_horizon' 'false'
- # option 'debug' '0'
- # Listen for connections from a front-end, e.g. on port 33123.
- ## option 'local_server' '33123'
- # option 'random_router_id' 'false'
- # Keep unfeasible routes
- ## option 'keep_unfeasible' 'false'
- # Use the given kernel routing table for routes inserted by babeld.
- ## option 'export_table' '0'
- # Export routes from the given kernel routing tables.
- ## list 'import_table' '0'
- ## list 'import_table' '42'
- # The configuration file is not necessary since you can do everything
- # from this file.
- # option 'conf_file' '/etc/babeld.conf'
- # option 'log_file' '/var/log/babeld.log'
-
-# You can use aliases (like lan, wlan) or real names (like eth0.0).
-# If you use an alias, it must be already defined when babeld starts.
-# Otherwise, the name is taken literally and the interface can be
-# brought up later (useful for tunnels for instance).
-config interface wlan
- # Remove this line to enable babeld on this interface
- option 'ignore' 'true'
- # option 'wired' 'auto'
- # option 'link_quality' 'auto'
- # option 'split_horizon' 'auto'
- # The default is 96 for wired interfaces, and 256 for wireless ones
- ## option 'rxcost' '256'
- # The default is specified with the -h and -H command-line flags.
- ## option 'hello_interval' '4'
- # This can be set to a fairly large value, unless significant
- # packet loss is expected. The default is four times the hello
- # interval.
- ## option 'update_interval' '16'
-
-config interface lan
- option 'ignore' 'true'
-
-# A filter consists in a type ('in', 'out' or 'redistribute'), an action
-# ('allow', 'deny' or 'metric xxx') and a set of selectors ('ip', 'eq',
-# etc.). See /etc/babeld.conf for more details.
-# Here is a sample filter wich redistributes the default route if its
-# protocol number is "boot", e.g. when it installed by dhcp. It is
-# disabled by default.
-config filter
- option 'ignore' 'true'
- # Type
- option 'type' 'redistribute'
- # Selectors: ip, eq, le, ge, neigh, id, proto, local, if
- option 'ip' '0.0.0.0/0'
- option 'le' '0'
- option 'proto' '3'
- # Action
- option 'action' 'metric 128'
-
+++ /dev/null
-#!/bin/sh /etc/rc.common
-
-START=70
-
-PID_F='/var/run/babeld.pid'
-EXTRA_COMMANDS="status"
-EXTRA_HELP=" status Dump Babel's table to the log file."
-
-listen_ifname() {
- local ifname=$(uci_get_state network "$1" ifname "$1")
- local switch="$2"
- append args "$switch $ifname"
- append interfaces "$ifname"
-}
-
-append_ifname() {
- local section="$1"
- local option="$2"
- local switch="$3"
- local _name
- config_get _name "$section" "$option"
- [ -z "$_name" ] && return 0
- local ifname=$(uci_get_state network "$_name" ifname "$_name")
- append args "$switch $ifname"
-}
-
-append_bool() {
- local section="$1"
- local option="$2"
- local value="$3"
- local _loctmp
- config_get_bool _loctmp "$section" "$option" 0
- [ "$_loctmp" -gt 0 ] && append args "$value"
-}
-
-append_switch() {
- local value="$1"
- local switch="$2"
- append args "$switch $value"
-}
-
-append_parm() {
- local section="$1"
- local option="$2"
- local switch="$3"
- local _loctmp
- config_get _loctmp "$section" "$option"
- [ -z "$_loctmp" ] && return 0
- append args "$switch $_loctmp"
-}
-
-babel_filter() {
- local cfg="$1"
- local _loctmp
-
- local _ignored
- config_get_bool _ignored "$cfg" 'ignore' 0
- [ "$_ignored" -eq 1 ] && return 0
-
- append args "-C '"
-
- append_parm "$cfg" 'type' ''
-
- append_bool "$cfg" 'local' 'local'
-
- append_parm "$cfg" 'ip' 'ip'
- append_parm "$cfg" 'eq' 'eq'
- append_parm "$cfg" 'le' 'le'
- append_parm "$cfg" 'ge' 'ge'
- append_parm "$cfg" 'neigh' 'neigh'
- append_parm "$cfg" 'id' 'id'
- append_parm "$cfg" 'proto' 'proto'
-
- append_ifname "$cfg" 'if' 'if'
-
- append_parm "$cfg" 'action' ''
-
- append args ' ' "'"
-}
-
-babel_addif() {
- local cfg="$1"
-
- local _ignored
- config_get_bool _ignored "$cfg" 'ignore' 0
- [ "$_ignored" -eq 1 ] && return 0
-
- listen_ifname "$cfg" "-C 'interface"
-
- append_parm "$cfg" 'wired' 'wired'
- append_parm "$cfg" 'link_quality' 'link-quality'
- append_parm "$cfg" 'split_horizon' 'split-horizon'
- append_parm "$cfg" 'rxcost' 'rxcost'
- append_parm "$cfg" 'hello_interval' 'hello-interval'
- append_parm "$cfg" 'update_interval' 'update-interval'
-
- append args ' ' "'"
-}
-
-babel_config() {
- local cfg="$1"
-
- append_bool "$cfg" 'carrier_sense' '-l'
- append_bool "$cfg" 'assume_wireless' '-w'
- append_bool "$cfg" 'no_split_horizon' '-s'
- append_bool "$cfg" 'keep_unfeasible' '-u'
- append_bool "$cfg" 'random_router_id' '-r'
-
- append_parm "$cfg" 'multicast_address' '-m'
- append_parm "$cfg" 'port' '-p'
- append_parm "$cfg" 'state_file' '-S'
- append_parm "$cfg" 'hello_interval' '-h'
- append_parm "$cfg" 'wired_hello_interval' '-H'
- append_parm "$cfg" 'diversity' '-z'
- append_parm "$cfg" 'smoothing_half_time' '-M'
- append_parm "$cfg" 'kernel_priority' '-k'
- append_parm "$cfg" 'duplication_priority' '-A'
- append_parm "$cfg" 'debug' '-d'
- append_parm "$cfg" 'local_server' '-g'
- append_parm "$cfg" 'export_table' '-t'
- config_list_foreach "$cfg" 'import_table' append_switch '-T'
- append_parm "$cfg" 'conf_file' '-c'
- append_parm "$cfg" 'log_file' '-L'
-}
-
-start() {
- mkdir -p /var/lib
- config_load babeld
- unset args
- unset interfaces
- config_foreach babel_config general
- config_foreach babel_addif interface
- config_foreach babel_filter filter
- [ -z "$interfaces" ] && return 0
- eval "/usr/sbin/babeld -D -I $PID_F $args $interfaces"
-}
-
-stop() {
- [ -f $PID_F ] && kill $(cat $PID_F)
-}
-
-status() {
- [ -f $PID_F ] && kill -USR1 $(cat $PID_F)
-}
projects / openwrt / svn-archive / packages.git / commitdiff