Disabled only that ISOC endpoints,for which interrupt bit was set
in the DAINTMSK register. This will allow to minimize incomplete
ISOC IN interrupt handling.
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Razmik Karapetyan <razmik@synopsys.com>
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
{
struct dwc2_hsotg_ep *hs_ep;
u32 epctrl;
+ u32 daintmsk;
u32 idx;
dev_dbg(hsotg->dev, "Incomplete isoc in interrupt received:\n");
+ daintmsk = dwc2_readl(hsotg->regs + DAINTMSK);
+
for (idx = 1; idx <= hsotg->num_of_eps; idx++) {
hs_ep = hsotg->eps_in[idx];
+ /* Proceed only unmasked ISOC EPs */
+ if (!hs_ep->isochronous || (BIT(idx) & ~daintmsk))
+ continue;
+
epctrl = dwc2_readl(hsotg->regs + DIEPCTL(idx));
- if ((epctrl & DXEPCTL_EPENA) && hs_ep->isochronous &&
+ if ((epctrl & DXEPCTL_EPENA) &&
dwc2_gadget_target_frame_elapsed(hs_ep)) {
epctrl |= DXEPCTL_SNAK;
epctrl |= DXEPCTL_EPDIS;