* the device is ready to be used by lib8390.c and registerd with
* the network layer.
*/
-static int ax_init_dev(struct net_device *dev, int first_init)
+static int ax_init_dev(struct net_device *dev)
{
struct ei_device *ei_local = netdev_priv(dev);
struct ax_device *ax = to_ax_dev(dev);
/* read the mac from the card prom if we need it */
- if (first_init && ax->plat->flags & AXFLG_HAS_EEPROM) {
+ if (ax->plat->flags & AXFLG_HAS_EEPROM) {
unsigned char SA_prom[32];
for (i = 0; i < sizeof(SA_prom); i += 2) {
}
#ifdef CONFIG_AX88796_93CX6
- if (first_init && ax->plat->flags & AXFLG_HAS_93CX6) {
+ if (ax->plat->flags & AXFLG_HAS_93CX6) {
unsigned char mac_addr[6];
struct eeprom_93cx6 eeprom;
stop_page = NE1SM_STOP_PG;
}
- /*
- * load the mac-address from the device if this is the first
- * time we've initialised
- */
- if (first_init) {
- if (ax->plat->flags & AXFLG_MAC_FROMDEV) {
- ei_outb(E8390_NODMA + E8390_PAGE1 + E8390_STOP,
- ei_local->mem + E8390_CMD); /* 0x61 */
- for (i = 0; i < ETHER_ADDR_LEN; i++)
- dev->dev_addr[i] =
- ei_inb(ioaddr + EN1_PHYS_SHIFT(i));
- }
-
- if ((ax->plat->flags & AXFLG_MAC_FROMPLATFORM) &&
- ax->plat->mac_addr)
- memcpy(dev->dev_addr, ax->plat->mac_addr,
- ETHER_ADDR_LEN);
+ /* load the mac-address from the device */
+ if (ax->plat->flags & AXFLG_MAC_FROMDEV) {
+ ei_outb(E8390_NODMA + E8390_PAGE1 + E8390_STOP,
+ ei_local->mem + E8390_CMD); /* 0x61 */
+ for (i = 0; i < ETHER_ADDR_LEN; i++)
+ dev->dev_addr[i] =
+ ei_inb(ioaddr + EN1_PHYS_SHIFT(i));
}
+ if ((ax->plat->flags & AXFLG_MAC_FROMPLATFORM) &&
+ ax->plat->mac_addr)
+ memcpy(dev->dev_addr, ax->plat->mac_addr,
+ ETHER_ADDR_LEN);
+
ax_reset_8390(dev);
ei_local->name = "AX88796";
ax_NS8390_init(dev, 0);
- if (first_init)
- dev_info(&ax->dev->dev, "%dbit, irq %d, %lx, MAC: %pM\n",
- ei_local->word16 ? 16 : 8, dev->irq, dev->base_addr,
- dev->dev_addr);
+ dev_info(&ax->dev->dev, "%dbit, irq %d, %lx, MAC: %pM\n",
+ ei_local->word16 ? 16 : 8, dev->irq, dev->base_addr,
+ dev->dev_addr);
ret = register_netdev(dev);
if (ret)
/* got resources, now initialise and register device */
- ret = ax_init_dev(dev, 1);
+ ret = ax_init_dev(dev);
if (!ret)
return 0;