KERNEL_PATCHVER:=$(KERNEL_TESTING_PATCHVER)
endif
-LINUX_VERSION-4.14 = .254
+LINUX_VERSION-4.14 = .258
-LINUX_KERNEL_HASH-4.14.254 = dfd95c1bc3af5b0e57e53608f8356037510b19cb55cac520e43c3d499ea60d46
+LINUX_KERNEL_HASH-4.14.258 = 71af29d042e4ce6cf0f8cdb5ce2fc4790cca642ee4a80ae6bb71a2092afc4b98
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
-@@ -1154,6 +1154,9 @@ config MIPS_MSC
+@@ -1157,6 +1157,9 @@ config MIPS_MSC
config MIPS_NILE4
bool
+++ /dev/null
-From 4d3c17975c7814884a721fe693b3adf5c426d759 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Tue, 10 Nov 2015 22:18:39 +0100
-Subject: [RFC] serial: core: add support for boot console with arbitrary
- baud rates
-
-The Arduino Yun uses a baud rate of 250000 by default. The serial is
-going over the Atmel ATmega and is used to connect to this chip.
-Without this patch Linux wants to switch the console to 9600 Baud.
-
-With this patch Linux will use the configured baud rate and not a
-default one specified in uart_register_driver().
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-[rebased to 4.14, slightly reworded commit message]
-Signed-off-by: Sungbo Eo <mans0n@gorani.run>
----
- drivers/tty/serial/serial_core.c | 6 +++++-
- include/linux/console.h | 1 +
- 2 files changed, 6 insertions(+), 1 deletions(-)
-
---- a/drivers/tty/serial/serial_core.c
-+++ b/drivers/tty/serial/serial_core.c
-@@ -232,6 +232,8 @@ static int uart_port_startup(struct tty_
- if (retval == 0) {
- if (uart_console(uport) && uport->cons->cflag) {
- tty->termios.c_cflag = uport->cons->cflag;
-+ tty->termios.c_ospeed = uport->cons->baud;
-+ tty->termios.c_ispeed = uport->cons->baud;
- uport->cons->cflag = 0;
- }
- /*
-@@ -2076,8 +2078,10 @@ uart_set_options(struct uart_port *port,
- * Allow the setting of the UART parameters with a NULL console
- * too:
- */
-- if (co)
-+ if (co) {
- co->cflag = termios.c_cflag;
-+ co->baud = baud;
-+ }
-
- return 0;
- }
---- a/include/linux/console.h
-+++ b/include/linux/console.h
-@@ -145,6 +145,7 @@ struct console {
- short flags;
- short index;
- int cflag;
-+ int baud;
- void *data;
- struct console *next;
- };
static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci)
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
-@@ -818,7 +818,7 @@ static inline void ci_role_destroy(struc
+@@ -827,7 +827,7 @@ static inline void ci_role_destroy(struc
{
ci_hdrc_gadget_destroy(ci);
ci_hdrc_host_destroy(ci);
ci_hdrc_otg_destroy(ci);
}
-@@ -923,6 +923,9 @@ static int ci_hdrc_probe(struct platform
+@@ -932,6 +932,9 @@ static int ci_hdrc_probe(struct platform
CI_HDRC_SUPPORTS_RUNTIME_PM);
platform_set_drvdata(pdev, ci);
ret = hw_device_init(ci, base);
if (ret < 0) {
dev_err(dev, "can't initialize hardware\n");
-@@ -1011,7 +1014,7 @@ static int ci_hdrc_probe(struct platform
+@@ -1020,7 +1023,7 @@ static int ci_hdrc_probe(struct platform
goto deinit_gadget;
}
+++ /dev/null
-From 4d3c17975c7814884a721fe693b3adf5c426d759 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Tue, 10 Nov 2015 22:18:39 +0100
-Subject: [RFC] serial: core: add support for boot console with arbitrary
- baud rates
-
-The Arduino Yun uses a baud rate of 250000 by default. The serial is
-going over the Atmel ATmega and is used to connect to this chip.
-Without this patch Linux wants to switch the console to 9600 Baud.
-
-With this patch Linux will use the configured baud rate and not a
-default one specified in uart_register_driver().
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-[rebased to 4.14, slightly reworded commit message]
-Signed-off-by: Sungbo Eo <mans0n@gorani.run>
----
- drivers/tty/serial/serial_core.c | 6 +++++-
- include/linux/console.h | 1 +
- 2 files changed, 6 insertions(+), 1 deletions(-)
-
---- a/drivers/tty/serial/serial_core.c
-+++ b/drivers/tty/serial/serial_core.c
-@@ -232,6 +232,8 @@ static int uart_port_startup(struct tty_
- if (retval == 0) {
- if (uart_console(uport) && uport->cons->cflag) {
- tty->termios.c_cflag = uport->cons->cflag;
-+ tty->termios.c_ospeed = uport->cons->baud;
-+ tty->termios.c_ispeed = uport->cons->baud;
- uport->cons->cflag = 0;
- }
- /*
-@@ -2076,8 +2078,10 @@ uart_set_options(struct uart_port *port,
- * Allow the setting of the UART parameters with a NULL console
- * too:
- */
-- if (co)
-+ if (co) {
- co->cflag = termios.c_cflag;
-+ co->baud = baud;
-+ }
-
- return 0;
- }
---- a/include/linux/console.h
-+++ b/include/linux/console.h
-@@ -145,6 +145,7 @@ struct console {
- short flags;
- short index;
- int cflag;
-+ int baud;
- void *data;
- struct console *next;
- };
axi@18000000 {
compatible = "brcm,bus-axi";
reg = <0x18000000 0x1000>;
-@@ -359,7 +352,33 @@
+@@ -361,7 +354,33 @@
reg = <0x18003000 0x8>;
#size-cells = <1>;
#address-cells = <0>;
};
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -475,8 +475,11 @@
+@@ -477,8 +477,11 @@
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
status = "disabled";
};
};
-@@ -391,6 +393,48 @@
+@@ -393,6 +395,48 @@
status = "disabled";
};
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -400,16 +400,12 @@
+@@ -402,16 +402,12 @@
#size-cells = <1>;
cru@100 {
}
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
-@@ -5177,7 +5177,7 @@ static void port_event(struct usb_hub *h
+@@ -5187,7 +5187,7 @@ static void port_event(struct usb_hub *h
if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
u16 status = 0, unused;
--- a/kernel/cgroup/cgroup.c
+++ b/kernel/cgroup/cgroup.c
-@@ -5219,6 +5219,9 @@ int __init cgroup_init_early(void)
+@@ -5242,6 +5242,9 @@ int __init cgroup_init_early(void)
return 0;
}
/**
* cgroup_init - cgroup initialization
*
-@@ -5256,6 +5259,12 @@ int __init cgroup_init(void)
+@@ -5279,6 +5282,12 @@ int __init cgroup_init(void)
mutex_unlock(&cgroup_mutex);
for_each_subsys(ss, ssid) {
if (ss->early_init) {
struct cgroup_subsys_state *css =
-@@ -5637,6 +5646,10 @@ static int __init cgroup_disable(char *s
+@@ -5660,6 +5669,10 @@ static int __init cgroup_disable(char *s
strcmp(token, ss->legacy_name))
continue;
static_branch_disable(cgroup_subsys_enabled_key[i]);
pr_info("Disabling %s control group subsystem\n",
ss->name);
-@@ -5646,6 +5659,31 @@ static int __init cgroup_disable(char *s
+@@ -5669,6 +5682,31 @@ static int __init cgroup_disable(char *s
}
__setup("cgroup_disable=", cgroup_disable);
enum vc4_kernel_bo_type type)
@@ -294,6 +419,9 @@ struct drm_gem_object *vc4_create_object
if (!bo)
- return ERR_PTR(-ENOMEM);
+ return NULL;
+ bo->madv = VC4_MADV_WILLNEED;
+ refcount_set(&bo->usecnt, 0);
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
-@@ -279,6 +279,7 @@ config BCM63XX
+@@ -282,6 +282,7 @@ config BCM63XX
select GPIOLIB
select HAVE_CLK
select MIPS_L1_CACHE_SHIFT_4
#include <linux/delay.h>
#include <bcm63xx_cpu.h>
#include <bcm63xx_io.h>
-@@ -359,44 +360,103 @@ long clk_round_rate(struct clk *clk, uns
+@@ -365,44 +366,103 @@ long clk_round_rate(struct clk *clk, uns
}
EXPORT_SYMBOL_GPL(clk_round_rate);
#define HSSPI_PLL_HZ_6328 133333333
#define HSSPI_PLL_HZ_6362 400000000
-@@ -404,11 +464,31 @@ EXPORT_SYMBOL(clk_put);
+@@ -410,11 +470,31 @@ EXPORT_SYMBOL(clk_put);
static int __init bcm63xx_clk_init(void)
{
switch (bcm63xx_get_cpu_id()) {
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
-@@ -363,6 +363,8 @@ EXPORT_SYMBOL_GPL(clk_round_rate);
+@@ -369,6 +369,8 @@ EXPORT_SYMBOL_GPL(clk_round_rate);
static struct clk_lookup bcm3368_clks[] = {
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
/* gated clocks */
CLKDEV_INIT(NULL, "enet0", &clk_enet0),
CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -376,6 +378,8 @@ static struct clk_lookup bcm3368_clks[]
+@@ -382,6 +384,8 @@ static struct clk_lookup bcm3368_clks[]
static struct clk_lookup bcm6328_clks[] = {
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
/* gated clocks */
CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -387,6 +391,7 @@ static struct clk_lookup bcm6328_clks[]
+@@ -393,6 +397,7 @@ static struct clk_lookup bcm6328_clks[]
static struct clk_lookup bcm6338_clks[] = {
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
/* gated clocks */
CLKDEV_INIT(NULL, "enet0", &clk_enet0),
CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -399,6 +404,7 @@ static struct clk_lookup bcm6338_clks[]
+@@ -405,6 +410,7 @@ static struct clk_lookup bcm6338_clks[]
static struct clk_lookup bcm6345_clks[] = {
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
/* gated clocks */
CLKDEV_INIT(NULL, "enet0", &clk_enet0),
CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -411,6 +417,7 @@ static struct clk_lookup bcm6345_clks[]
+@@ -417,6 +423,7 @@ static struct clk_lookup bcm6345_clks[]
static struct clk_lookup bcm6348_clks[] = {
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
/* gated clocks */
CLKDEV_INIT(NULL, "enet0", &clk_enet0),
CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -423,6 +430,8 @@ static struct clk_lookup bcm6348_clks[]
+@@ -429,6 +436,8 @@ static struct clk_lookup bcm6348_clks[]
static struct clk_lookup bcm6358_clks[] = {
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
/* gated clocks */
CLKDEV_INIT(NULL, "enet0", &clk_enet0),
CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -436,6 +445,8 @@ static struct clk_lookup bcm6358_clks[]
+@@ -442,6 +451,8 @@ static struct clk_lookup bcm6358_clks[]
static struct clk_lookup bcm6362_clks[] = {
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
/* gated clocks */
CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -449,6 +460,8 @@ static struct clk_lookup bcm6362_clks[]
+@@ -455,6 +466,8 @@ static struct clk_lookup bcm6362_clks[]
static struct clk_lookup bcm6368_clks[] = {
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
/*
* XTM clock
-@@ -380,6 +384,7 @@ static struct clk_lookup bcm6328_clks[]
+@@ -386,6 +390,7 @@ static struct clk_lookup bcm6328_clks[]
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
/* gated clocks */
CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -447,6 +452,7 @@ static struct clk_lookup bcm6362_clks[]
+@@ -453,6 +458,7 @@ static struct clk_lookup bcm6362_clks[]
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
/* gated clocks */
CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -481,7 +487,7 @@ static int __init bcm63xx_clk_init(void)
+@@ -487,7 +493,7 @@ static int __init bcm63xx_clk_init(void)
clkdev_add_table(bcm3368_clks, ARRAY_SIZE(bcm3368_clks));
break;
case BCM6328_CPU_ID:
clkdev_add_table(bcm6328_clks, ARRAY_SIZE(bcm6328_clks));
break;
case BCM6338_CPU_ID:
-@@ -497,7 +503,7 @@ static int __init bcm63xx_clk_init(void)
+@@ -503,7 +509,7 @@ static int __init bcm63xx_clk_init(void)
clkdev_add_table(bcm6358_clks, ARRAY_SIZE(bcm6358_clks));
break;
case BCM6362_CPU_ID:
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
-@@ -377,6 +377,8 @@ static struct clk_lookup bcm3368_clks[]
+@@ -383,6 +383,8 @@ static struct clk_lookup bcm3368_clks[]
CLKDEV_INIT(NULL, "usbd", &clk_usbd),
CLKDEV_INIT(NULL, "spi", &clk_spi),
CLKDEV_INIT(NULL, "pcm", &clk_pcm),
};
static struct clk_lookup bcm6328_clks[] = {
-@@ -404,6 +406,7 @@ static struct clk_lookup bcm6338_clks[]
+@@ -410,6 +412,7 @@ static struct clk_lookup bcm6338_clks[]
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
CLKDEV_INIT(NULL, "usbd", &clk_usbd),
CLKDEV_INIT(NULL, "spi", &clk_spi),
};
static struct clk_lookup bcm6345_clks[] = {
-@@ -417,6 +420,7 @@ static struct clk_lookup bcm6345_clks[]
+@@ -423,6 +426,7 @@ static struct clk_lookup bcm6345_clks[]
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
CLKDEV_INIT(NULL, "usbd", &clk_usbd),
CLKDEV_INIT(NULL, "spi", &clk_spi),
};
static struct clk_lookup bcm6348_clks[] = {
-@@ -430,6 +434,8 @@ static struct clk_lookup bcm6348_clks[]
+@@ -436,6 +440,8 @@ static struct clk_lookup bcm6348_clks[]
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
CLKDEV_INIT(NULL, "usbd", &clk_usbd),
CLKDEV_INIT(NULL, "spi", &clk_spi),
};
static struct clk_lookup bcm6358_clks[] = {
-@@ -445,6 +451,8 @@ static struct clk_lookup bcm6358_clks[]
+@@ -451,6 +457,8 @@ static struct clk_lookup bcm6358_clks[]
CLKDEV_INIT(NULL, "usbd", &clk_usbd),
CLKDEV_INIT(NULL, "spi", &clk_spi),
CLKDEV_INIT(NULL, "pcm", &clk_pcm),
if (enable) {
/* reset sar core afer clock change */
-@@ -451,6 +490,8 @@ static struct clk_lookup bcm6358_clks[]
+@@ -457,6 +496,8 @@ static struct clk_lookup bcm6358_clks[]
CLKDEV_INIT(NULL, "usbd", &clk_usbd),
CLKDEV_INIT(NULL, "spi", &clk_spi),
CLKDEV_INIT(NULL, "pcm", &clk_pcm),
}
static struct clk clk_pcie = {
-@@ -536,6 +550,21 @@ static struct clk_lookup bcm6368_clks[]
+@@ -542,6 +556,21 @@ static struct clk_lookup bcm6368_clks[]
CLKDEV_INIT(NULL, "ipsec", &clk_ipsec),
};
#define HSSPI_PLL_HZ_6328 133333333
#define HSSPI_PLL_HZ_6362 400000000
-@@ -568,6 +597,10 @@ static int __init bcm63xx_clk_init(void)
+@@ -574,6 +603,10 @@ static int __init bcm63xx_clk_init(void)
case BCM6368_CPU_ID:
clkdev_add_table(bcm6368_clks, ARRAY_SIZE(bcm6368_clks));
break;
mask = CKCTL_6328_HSSPI_EN;
else if (BCMCPU_IS_6362())
mask = CKCTL_6362_HSSPI_EN;
-@@ -444,6 +446,19 @@ static struct clk_lookup bcm3368_clks[]
+@@ -450,6 +452,19 @@ static struct clk_lookup bcm3368_clks[]
CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet1),
};
static struct clk_lookup bcm6328_clks[] = {
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
-@@ -565,6 +580,7 @@ static struct clk_lookup bcm63268_clks[]
+@@ -571,6 +586,7 @@ static struct clk_lookup bcm63268_clks[]
CLKDEV_INIT(NULL, "pcie", &clk_pcie),
};
#define HSSPI_PLL_HZ_6328 133333333
#define HSSPI_PLL_HZ_6362 400000000
-@@ -574,6 +590,10 @@ static int __init bcm63xx_clk_init(void)
+@@ -580,6 +596,10 @@ static int __init bcm63xx_clk_init(void)
case BCM3368_CPU_ID:
clkdev_add_table(bcm3368_clks, ARRAY_SIZE(bcm3368_clks));
break;
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
-@@ -489,6 +489,8 @@ static struct clk_lookup bcm3368_clks[]
+@@ -495,6 +495,8 @@ static struct clk_lookup bcm3368_clks[]
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
/* gated clocks */
CLKDEV_INIT(NULL, "enet0", &clk_enet0),
CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -505,7 +507,9 @@ static struct clk_lookup bcm6318_clks[]
+@@ -511,7 +513,9 @@ static struct clk_lookup bcm6318_clks[]
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
/* gated clocks */
CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -519,7 +523,10 @@ static struct clk_lookup bcm6328_clks[]
+@@ -525,7 +529,10 @@ static struct clk_lookup bcm6328_clks[]
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
/* gated clocks */
CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -532,6 +539,7 @@ static struct clk_lookup bcm6338_clks[]
+@@ -538,6 +545,7 @@ static struct clk_lookup bcm6338_clks[]
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
/* gated clocks */
CLKDEV_INIT(NULL, "enet0", &clk_enet0),
CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -546,6 +554,7 @@ static struct clk_lookup bcm6345_clks[]
+@@ -552,6 +560,7 @@ static struct clk_lookup bcm6345_clks[]
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
/* gated clocks */
CLKDEV_INIT(NULL, "enet0", &clk_enet0),
CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -560,6 +569,7 @@ static struct clk_lookup bcm6348_clks[]
+@@ -566,6 +575,7 @@ static struct clk_lookup bcm6348_clks[]
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
/* gated clocks */
CLKDEV_INIT(NULL, "enet0", &clk_enet0),
CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -576,6 +586,8 @@ static struct clk_lookup bcm6358_clks[]
+@@ -582,6 +592,8 @@ static struct clk_lookup bcm6358_clks[]
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
/* gated clocks */
CLKDEV_INIT(NULL, "enet0", &clk_enet0),
CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -595,7 +607,10 @@ static struct clk_lookup bcm6362_clks[]
+@@ -601,7 +613,10 @@ static struct clk_lookup bcm6362_clks[]
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
/* gated clocks */
CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -611,6 +626,8 @@ static struct clk_lookup bcm6368_clks[]
+@@ -617,6 +632,8 @@ static struct clk_lookup bcm6368_clks[]
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
/* gated clocks */
CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -625,7 +642,10 @@ static struct clk_lookup bcm63268_clks[]
+@@ -631,7 +648,10 @@ static struct clk_lookup bcm63268_clks[]
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
-@@ -2048,7 +2048,8 @@ static const struct usb_device_id option
+@@ -2050,7 +2050,8 @@ static const struct usb_device_id option
{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d01, 0xff) }, /* D-Link DWM-156 (variant) */
{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d02, 0xff) },
{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d03, 0xff) },
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
----
- rename net/batman-adv/packet.h => include/uapi/linux/batadv_packet.h (99%)
--- a/MAINTAINERS
+++ b/MAINTAINERS
struct net_device;
--- a/net/batman-adv/multicast.c
+++ b/net/batman-adv/multicast.c
-@@ -54,11 +54,11 @@
+@@ -54,12 +54,12 @@
#include <net/if_inet6.h>
#include <net/ip.h>
#include <net/ipv6.h>
+#include <uapi/linux/batadv_packet.h>
+ #include "bridge_loop_avoidance.h"
#include "hard-interface.h"
#include "hash.h"
#include "log.h"
-#include "packet.h"
+ #include "send.h"
#include "translation-table.h"
#include "tvlv.h"
-
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -39,6 +39,7 @@
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
-@@ -1160,6 +1160,10 @@ config SYNC_R4K
+@@ -1163,6 +1163,10 @@ config SYNC_R4K
config MIPS_MACHINE
def_bool n
IPC_SEM_IDS, sysvipc_sem_proc_show);
--- a/ipc/shm.c
+++ b/ipc/shm.c
-@@ -122,6 +122,8 @@ pure_initcall(ipc_ns_init);
+@@ -123,6 +123,8 @@ pure_initcall(ipc_ns_init);
void __init shm_init(void)
{
+MODULE_LICENSE("GPL");
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
-@@ -2165,6 +2165,7 @@ int wake_up_state(struct task_struct *p,
+@@ -2168,6 +2168,7 @@ int wake_up_state(struct task_struct *p,
{
return try_to_wake_up(p, state, 0);
}
---
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
-@@ -1069,9 +1069,6 @@ config FW_ARC
+@@ -1072,9 +1072,6 @@ config FW_ARC
config ARCH_MAY_HAVE_PC_FDC
bool
config CEVT_BCM1480
bool
-@@ -2969,6 +2966,18 @@ choice
+@@ -2973,6 +2970,18 @@ choice
bool "Extend builtin kernel arguments with bootloader arguments"
endchoice
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
-@@ -2893,6 +2893,20 @@ config MIPS_O32_FP64_SUPPORT
+@@ -2897,6 +2897,20 @@ config MIPS_O32_FP64_SUPPORT
If unsure, say N.
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_BIG_ENDIAN
-@@ -346,6 +347,7 @@ config MACH_JAZZ
+@@ -349,6 +350,7 @@ config MACH_JAZZ
select CSRC_R4K
select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN
select GENERIC_ISA_DMA
select HAVE_PCSPKR_PLATFORM
select IRQ_MIPS_CPU
select I8253
-@@ -1130,6 +1132,9 @@ config DMA_NONCOHERENT
+@@ -1133,6 +1135,9 @@ config DMA_NONCOHERENT
bool
select NEED_DMA_MAP_STATE
config NEED_DMA_MAP_STATE
bool
-@@ -1654,6 +1659,7 @@ config CPU_R10000
+@@ -1658,6 +1663,7 @@ config CPU_R10000
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_HUGEPAGES
help
MIPS Technologies R10000-series processors.
-@@ -1902,9 +1908,11 @@ config SYS_HAS_CPU_MIPS32_R3_5
+@@ -1906,9 +1912,11 @@ config SYS_HAS_CPU_MIPS32_R3_5
bool
config SYS_HAS_CPU_MIPS32_R5
bool
config SYS_HAS_CPU_MIPS64_R1
-@@ -1914,6 +1922,7 @@ config SYS_HAS_CPU_MIPS64_R2
+@@ -1918,6 +1926,7 @@ config SYS_HAS_CPU_MIPS64_R2
bool
config SYS_HAS_CPU_MIPS64_R6
/**
* ata_build_rw_tf - Build ATA taskfile for given read/write request
* @tf: Target ATA taskfile
-@@ -5157,6 +5170,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
+@@ -5159,6 +5172,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
if (tag < 0)
return NULL;
}
qc = __ata_qc_from_tag(ap, tag);
qc->tag = tag;
-@@ -6060,6 +6076,9 @@ struct ata_port *ata_port_alloc(struct a
+@@ -6062,6 +6078,9 @@ struct ata_port *ata_port_alloc(struct a
ap->stats.unhandled_irq = 1;
ap->stats.idle_irq = 1;
#endif
ata_sff_port_init(ap);
return ap;
-@@ -6081,6 +6100,12 @@ static void ata_host_release(struct devi
+@@ -6083,6 +6102,12 @@ static void ata_host_release(struct devi
kfree(ap->pmp_link);
kfree(ap->slave_link);
kfree(ap);
host->ports[i] = NULL;
}
-@@ -6527,7 +6552,23 @@ int ata_host_register(struct ata_host *h
+@@ -6529,7 +6554,23 @@ int ata_host_register(struct ata_host *h
host->ports[i]->print_id = atomic_inc_return(&ata_print_id);
host->ports[i]->local_port_no = i + 1;
}
@@ -67,7 +67,7 @@ KBUILD_CFLAGS += $(call cc-option,-fno-i
# macro, but instead defines a whole series of macros which makes
# testing for a specific architecture or later rather impossible.
- arch-$(CONFIG_CPU_32v7M) =-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
--arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
+ arch-$(CONFIG_CPU_32v7M) =-D__LINUX_ARM_ARCH__=7 -march=armv7-m
+-arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 -march=armv7-a
+arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 -mcpu=cortex-a15
- arch-$(CONFIG_CPU_32v6) =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
+ arch-$(CONFIG_CPU_32v6) =-D__LINUX_ARM_ARCH__=6 -march=armv6
# Only override the compiler option if ARMv6. The ARMv6K extensions are
# always available in ARMv7
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
-@@ -2326,6 +2326,12 @@ config MIPS_VPE_LOADER
+@@ -2330,6 +2330,12 @@ config MIPS_VPE_LOADER
Includes a loader for loading an elf relocatable object
onto another VPE and running it.
* by reading property in device tree
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
-@@ -689,12 +689,34 @@ void xhci_set_link_state(struct xhci_hcd
+@@ -690,12 +690,34 @@ void xhci_set_link_state(struct xhci_hcd
int port_id, u32 link_state)
{
u32 temp;
xhci->quirks |= XHCI_BROKEN_PORT_PED;
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
-@@ -2022,10 +2022,12 @@ static int finish_td(struct xhci_hcd *xh
+@@ -2029,10 +2029,12 @@ static int finish_td(struct xhci_hcd *xh
union xhci_trb *ep_trb, struct xhci_transfer_event *event,
struct xhci_virt_ep *ep, int *status)
{
u32 trb_comp_code;
int ep_index;
-@@ -2048,14 +2050,30 @@ static int finish_td(struct xhci_hcd *xh
+@@ -2055,14 +2057,30 @@ static int finish_td(struct xhci_hcd *xh
if (trb_comp_code == COMP_STALL_ERROR ||
xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
trb_comp_code)) {
/*
* convert_ifc_address - convert the base address
-@@ -311,6 +314,261 @@ err:
+@@ -310,6 +313,261 @@ err:
return ret;
}
static const struct of_device_id fsl_ifc_match[] = {
{
.compatible = "fsl,ifc",
-@@ -318,10 +576,15 @@ static const struct of_device_id fsl_ifc
+@@ -317,10 +575,15 @@ static const struct of_device_id fsl_ifc
{},
};
* them, we have to fall back to INTx or other interrupts, e.g., a
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
-@@ -3431,6 +3431,13 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_A
+@@ -3432,6 +3432,13 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_A
*/
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, 0xb005, quirk_no_bus_reset);
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -100,6 +100,33 @@
+@@ -103,6 +103,33 @@
status = "okay";
};
-From eefe328439642101774f0f5c4ea0dc6ba1cfb687 Mon Sep 17 00:00:00 2001
+From d2314a5265eb43e754a26050caa2b31527cc1770 Mon Sep 17 00:00:00 2001
From: Ding Tao <miyatsu@qq.com>
Date: Fri, 26 Oct 2018 11:50:27 +0000
Subject: [PATCH] arm64: dts: marvell: armada37xx: Add emmc/sdio pinctrl
+ function = "sdio";
+ };
+
- };
-
- eth0: ethernet@30000 {
+ pcie_reset_pins: pcie-reset-pins {
+ groups = "pcie1";
+ function = "gpio";
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -97,9 +97,31 @@
+@@ -100,9 +100,31 @@
cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>;
marvell,pad-type = "sd";
vqmmc-supply = <&vcc_sd_reg1>;
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -127,25 +127,9 @@
+@@ -130,25 +130,9 @@
flash@0 {
reg = <0>;
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -157,7 +157,7 @@
+@@ -160,7 +160,7 @@
dsa,member = <0 0>;
+++ /dev/null
-From patchwork Thu Sep 28 12:58:34 2017
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v2,
- 3/7] PCI: aardvark: set host and device to the same MAX payload size
-X-Patchwork-Submitter: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-X-Patchwork-Id: 819587
-Message-Id: <20170928125838.11887-4-thomas.petazzoni@free-electrons.com>
-To: Bjorn Helgaas <bhelgaas@google.com>, linux-pci@vger.kernel.org
-Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
- Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>, Gregory Clement
- <gregory.clement@free-electrons.com>,
- Nadav Haklai <nadavh@marvell.com>, Hanna Hawa <hannah@marvell.com>,
- Yehuda Yitschak <yehuday@marvell.com>,
- linux-arm-kernel@lists.infradead.org, Antoine Tenart
- <antoine.tenart@free-electrons.com>, =?utf-8?q?Miqu=C3=A8l_Raynal?=
- <miquel.raynal@free-electrons.com>, Victor Gu <xigu@marvell.com>,
- Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Date: Thu, 28 Sep 2017 14:58:34 +0200
-From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-List-Id: <linux-pci.vger.kernel.org>
-
-From: Victor Gu <xigu@marvell.com>
-
-Since the Aardvark does not implement a PCIe root bus, the Linux PCIe
-subsystem will not align the MAX payload size between the host and the
-device. This patch ensures that the host and device have the same MAX
-payload size, fixing a number of problems with various PCIe devices.
-
-This is part of fixing bug
-https://bugzilla.kernel.org/show_bug.cgi?id=196339, this commit was
-reported as the user to be important to get a Intel 7260 mini-PCIe
-WiFi card working.
-
-Fixes: Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver")
-Signed-off-by: Victor Gu <xigu@marvell.com>
-Reviewed-by: Evan Wang <xswang@marvell.com>
-Reviewed-by: Nadav Haklai <nadavh@marvell.com>
-[Thomas: tweak commit log.]
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- drivers/pci/host/pci-aardvark.c | 60 ++++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 59 insertions(+), 1 deletion(-)
-
---- a/drivers/pci/host/pci-aardvark.c
-+++ b/drivers/pci/host/pci-aardvark.c
-@@ -30,9 +30,11 @@
- #define PCIE_CORE_DEV_CTRL_STATS_REG 0xc8
- #define PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE (0 << 4)
- #define PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT 5
-+#define PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ 0x2
- #define PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE (0 << 11)
- #define PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT 12
- #define PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ 0x2
-+#define PCIE_CORE_MPS_UNIT_BYTE 128
- #define PCIE_CORE_LINK_CTRL_STAT_REG 0xd0
- #define PCIE_CORE_LINK_L0S_ENTRY BIT(0)
- #define PCIE_CORE_LINK_TRAINING BIT(5)
-@@ -300,7 +302,8 @@ static void advk_pcie_setup_hw(struct ad
-
- /* Set PCIe Device Control and Status 1 PF0 register */
- reg = PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE |
-- (7 << PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT) |
-+ (PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ <<
-+ PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT) |
- PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE |
- (PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ <<
- PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT);
-@@ -968,6 +971,58 @@ out_release_res:
- return err;
- }
-
-+static int advk_pcie_find_smpss(struct pci_dev *dev, void *data)
-+{
-+ u8 *smpss = data;
-+
-+ if (!dev)
-+ return 0;
-+
-+ if (!pci_is_pcie(dev))
-+ return 0;
-+
-+ if (*smpss > dev->pcie_mpss)
-+ *smpss = dev->pcie_mpss;
-+
-+ return 0;
-+}
-+
-+static int advk_pcie_bus_configure_mps(struct pci_dev *dev, void *data)
-+{
-+ int mps;
-+
-+ if (!dev)
-+ return 0;
-+
-+ if (!pci_is_pcie(dev))
-+ return 0;
-+
-+ mps = PCIE_CORE_MPS_UNIT_BYTE << *(u8 *)data;
-+ pcie_set_mps(dev, mps);
-+
-+ return 0;
-+}
-+
-+static void advk_pcie_configure_mps(struct pci_bus *bus, struct advk_pcie *pcie)
-+{
-+ u8 smpss = PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ;
-+ u32 reg;
-+
-+ /* Find the minimal supported MAX payload size */
-+ advk_pcie_find_smpss(bus->self, &smpss);
-+ pci_walk_bus(bus, advk_pcie_find_smpss, &smpss);
-+
-+ /* Configure RC MAX payload size */
-+ reg = advk_readl(pcie, PCIE_CORE_DEV_CTRL_STATS_REG);
-+ reg &= ~PCI_EXP_DEVCTL_PAYLOAD;
-+ reg |= smpss << PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT;
-+ advk_writel(pcie, reg, PCIE_CORE_DEV_CTRL_STATS_REG);
-+
-+ /* Configure device MAX payload size */
-+ advk_pcie_bus_configure_mps(bus->self, &smpss);
-+ pci_walk_bus(bus, advk_pcie_bus_configure_mps, &smpss);
-+}
-+
- static int advk_pcie_probe(struct platform_device *pdev)
- {
- struct device *dev = &pdev->dev;
-@@ -1042,6 +1097,9 @@ static int advk_pcie_probe(struct platfo
- list_for_each_entry(child, &bus->children, node)
- pcie_bus_configure_settings(child);
-
-+ /* Configure the MAX pay load size */
-+ advk_pcie_configure_mps(bus, pcie);
-+
- pci_bus_add_devices(bus);
- return 0;
- }
+++ /dev/null
-From f70b629e488cc3f2a325ac35476f4f7ae502c5d0 Mon Sep 17 00:00:00 2001
-From: Tomasz Maciej Nowak <tmn505@gmail.com>
-Date: Thu, 14 Jun 2018 14:24:40 +0200
-Subject: [PATCH 1/2] PCI: aardvark: allow to specify link capability
-
-Use DT of_pci_get_max_link_speed() facility to allow specifying link
-capability. If none or unspecified value is given it falls back to gen2,
-which is default for Armada 3700 SoC.
-
-Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
----
- drivers/pci/host/pci-aardvark.c | 11 +++++++++--
- 1 file changed, 9 insertions(+), 2 deletions(-)
-
---- a/drivers/pci/host/pci-aardvark.c
-+++ b/drivers/pci/host/pci-aardvark.c
-@@ -275,6 +275,8 @@ static void advk_pcie_set_ob_win(struct
-
- static void advk_pcie_setup_hw(struct advk_pcie *pcie)
- {
-+ struct device *dev = &pcie->pdev->dev;
-+ struct device_node *node = dev->of_node;
- u32 reg;
- int i;
-
-@@ -314,10 +316,15 @@ static void advk_pcie_setup_hw(struct ad
- PCIE_CORE_CTRL2_TD_ENABLE;
- advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
-
-- /* Set GEN2 */
-+ /* Set GEN */
- reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
- reg &= ~PCIE_GEN_SEL_MSK;
-- reg |= SPEED_GEN_2;
-+ if (of_pci_get_max_link_speed(node) == 1)
-+ reg |= SPEED_GEN_1;
-+ else if (of_pci_get_max_link_speed(node) == 3)
-+ reg |= SPEED_GEN_3;
-+ else
-+ reg |= SPEED_GEN_2;
- advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-
- /* Set lane X1 */
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -83,6 +83,8 @@
- /* J9 */
- &pcie0 {
+@@ -86,6 +86,8 @@
+ pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
+ reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
status = "okay";
+
+ max-link-speed = <1>;
/* initialize internal qc */
/* XXX: Tag 0 is used for drivers with legacy EH as some
-@@ -5164,6 +5172,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
+@@ -5166,6 +5174,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
return NULL;
/* libsas case */
if (ap->flags & ATA_FLAG_SAS_HOST) {
tag = ata_sas_allocate_tag(ap);
-@@ -5209,6 +5220,8 @@ void ata_qc_free(struct ata_queued_cmd *
+@@ -5211,6 +5222,8 @@ void ata_qc_free(struct ata_queued_cmd *
qc->tag = ATA_TAG_POISON;
if (ap->flags & ATA_FLAG_SAS_HOST)
ata_sas_free_tag(tag, ap);
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
-@@ -629,6 +629,8 @@ config RALINK
+@@ -632,6 +632,8 @@ config RALINK
select CLKDEV_LOOKUP
select ARCH_HAS_RESET_CONTROLLER
select RESET_CONTROLLER
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
-@@ -631,6 +631,9 @@ config RALINK
+@@ -634,6 +634,9 @@ config RALINK
select RESET_CONTROLLER
select PINCTRL
select PINCTRL_RT2880
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
-@@ -428,6 +428,9 @@ uart_get_baud_rate(struct uart_port *por
+@@ -435,6 +435,9 @@ uart_get_baud_rate(struct uart_port *por
break;
}
--- a/arch/mips/kernel/mips-cm.c
+++ b/arch/mips/kernel/mips-cm.c
-@@ -237,6 +237,7 @@ int mips_cm_probe(void)
+@@ -236,6 +236,7 @@ int mips_cm_probe(void)
/* disable CM regions */
write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR);
write_gcr_reg0_mask(CM_GCR_REGn_MASK_ADDRMASK);
write_gcr_reg1_base(CM_GCR_REGn_BASE_BASEADDR);
write_gcr_reg1_mask(CM_GCR_REGn_MASK_ADDRMASK);
-@@ -244,7 +245,7 @@ int mips_cm_probe(void)
+@@ -243,7 +244,7 @@ int mips_cm_probe(void)
write_gcr_reg2_mask(CM_GCR_REGn_MASK_ADDRMASK);
write_gcr_reg3_base(CM_GCR_REGn_BASE_BASEADDR);
write_gcr_reg3_mask(CM_GCR_REGn_MASK_ADDRMASK);
projects / openwrt / staging / hauke.git / commitdiff