gpio: pl061: detail IRQ trigger handling

I couldn't follow this code flow. Make it dirt simple to figure
out what is going on and get proper debug prints. Warn if we
set up an IRQ without any trigger. Should make no semantic
difference.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
index 229ef653e0f8f631172e1956ad4c9f9c74c50b02..5b1461f6aeedf34ba9aba30182a761606f197f27 100644 (file)
--- a/drivers/gpio/gpio-pl061.c
+++ b/drivers/gpio/gpio-pl061.c
@@ -158,24 +158,63 @@ static int pl061_irq_type(struct irq_data *d, unsigned trigger)
        gpiois = readb(chip->base + GPIOIS);
        gpioibe = readb(chip->base + GPIOIBE);
 
+       if ((trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) &&
+           (trigger & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)))
+       {
+               dev_err(gc->dev,
+                       "trying to configure line %d for both level and edge "
+                       "detection, choose one!\n",
+                       offset);
+               return -EINVAL;
+       }
+
        if (trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
+               bool polarity = trigger & IRQ_TYPE_LEVEL_HIGH;
+
+               /* Disable edge detection */
+               gpioibe &= ~bit;
+               /* Enable level detection */
                gpiois |= bit;
-               if (trigger & IRQ_TYPE_LEVEL_HIGH)
+               /* Select polarity */
+               if (polarity)
                        gpioiev |= bit;
                else
                        gpioiev &= ~bit;
-       } else
-               gpiois &= ~bit;
 
-       if ((trigger & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH)
-               /* Setting this makes GPIOEV be ignored */
+               dev_dbg(gc->dev, "line %d: IRQ on %s level\n",
+                       offset,
+                       polarity ? "HIGH" : "LOW");
+       } else if ((trigger & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
+               /* Disable level detection */
+               gpiois &= ~bit;
+               /* Select both edges, setting this makes GPIOEV be ignored */
                gpioibe |= bit;
-       else {
+
+               dev_dbg(gc->dev, "line %d: IRQ on both edges\n", offset);
+       } else if ((trigger & IRQ_TYPE_EDGE_RISING) ||
+                  (trigger & IRQ_TYPE_EDGE_FALLING)) {
+               bool rising = trigger & IRQ_TYPE_EDGE_RISING;
+
+               /* Disable level detection */
+               gpiois &= ~bit;
+               /* Clear detection on both edges */
                gpioibe &= ~bit;
-               if (trigger & IRQ_TYPE_EDGE_RISING)
+               /* Select edge */
+               if (rising)
                        gpioiev |= bit;
-               else if (trigger & IRQ_TYPE_EDGE_FALLING)
+               else
                        gpioiev &= ~bit;
+
+               dev_dbg(gc->dev, "line %d: IRQ on %s edge\n",
+                       offset,
+                       rising ? "RISING" : "FALLING");
+       } else {
+               /* No trigger: disable everything */
+               gpiois &= ~bit;
+               gpioibe &= ~bit;
+               gpioiev &= ~bit;
+               dev_warn(gc->dev, "no trigger selected for line %d\n",
+                        offset);
        }
 
        writeb(gpiois, chip->base + GPIOIS);