Bluetooth: btusb: Use generic functionality by Broadcom module

The new Broadcom Bluetooth support module provides generic functionality
for changing and checking the Bluetooth device address. Use these new
features instead of keeping a duplicate in the driver.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 4fbe067cd33a340e3e336233ed86ef6fb926d47f..b593e5f766dfa75cb57f786ed0ec21412fd701c2 100644 (file)
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -8,6 +8,7 @@ config BT_BCM
 config BT_HCIBTUSB
        tristate "HCI USB driver"
        depends on USB
+       select BT_BCM
        help
          Bluetooth HCI USB driver.
          This driver is required if you want to use Bluetooth devices with

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 6e4ff16e487b06229346a9284e867962f70f0d5c..08561ad7a638b919222f7273a88484060f63974f 100644 (file)
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -29,6 +29,8 @@
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
 
+#include "btbcm.h"
+
 #define VERSION "0.7"
 
 static bool disable_scofix;
@@ -2418,8 +2420,6 @@ static const struct {
        { }
 };
 
-#define BDADDR_BCM20702A0 (&(bdaddr_t) {{0x00, 0xa0, 0x02, 0x70, 0x20, 0x00}})
-
 static int btusb_setup_bcm_patchram(struct hci_dev *hdev)
 {
        struct btusb_data *data = hci_get_drvdata(hdev);
@@ -2434,7 +2434,6 @@ static int btusb_setup_bcm_patchram(struct hci_dev *hdev)
        const char *hw_name = NULL;
        struct sk_buff *skb;
        struct hci_rp_read_local_version *ver;
-       struct hci_rp_read_bd_addr *bda;
        long ret;
        int i;
 
@@ -2572,43 +2571,7 @@ reset_fw:
                hw_name ? : "BCM", (subver & 0x7000) >> 13,
                (subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
 
-       /* Read BD Address */
-       skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL,
-                            HCI_INIT_TIMEOUT);
-       if (IS_ERR(skb)) {
-               ret = PTR_ERR(skb);
-               BT_ERR("%s: HCI_OP_READ_BD_ADDR failed (%ld)",
-                      hdev->name, ret);
-               goto done;
-       }
-
-       if (skb->len != sizeof(*bda)) {
-               BT_ERR("%s: HCI_OP_READ_BD_ADDR event length mismatch",
-                      hdev->name);
-               kfree_skb(skb);
-               ret = -EIO;
-               goto done;
-       }
-
-       bda = (struct hci_rp_read_bd_addr *)skb->data;
-       if (bda->status) {
-               BT_ERR("%s: HCI_OP_READ_BD_ADDR error status (%02x)",
-                      hdev->name, bda->status);
-               kfree_skb(skb);
-               ret = -bt_to_errno(bda->status);
-               goto done;
-       }
-
-       /* The address 00:20:70:02:A0:00 indicates a BCM20702A0 controller
-        * with no configured address.
-        */
-       if (!bacmp(&bda->bdaddr, BDADDR_BCM20702A0)) {
-               BT_INFO("%s: BCM: using default device address (%pMR)",
-                       hdev->name, &bda->bdaddr);
-               set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
-       }
-
-       kfree_skb(skb);
+       btbcm_check_bdaddr(hdev);
 
 done:
        release_firmware(fw);
@@ -2616,23 +2579,6 @@ done:
        return ret;
 }
 
-static int btusb_set_bdaddr_bcm(struct hci_dev *hdev, const bdaddr_t *bdaddr)
-{
-       struct sk_buff *skb;
-       long ret;
-
-       skb = __hci_cmd_sync(hdev, 0xfc01, 6, bdaddr, HCI_INIT_TIMEOUT);
-       if (IS_ERR(skb)) {
-               ret = PTR_ERR(skb);
-               BT_ERR("%s: BCM: Change address command failed (%ld)",
-                      hdev->name, ret);
-               return ret;
-       }
-       kfree_skb(skb);
-
-       return 0;
-}
-
 static int btusb_setup_bcm_apple(struct hci_dev *hdev)
 {
        struct sk_buff *skb;
@@ -3056,7 +3002,7 @@ static int btusb_probe(struct usb_interface *intf,
 
        if (id->driver_info & BTUSB_BCM_PATCHRAM) {
                hdev->setup = btusb_setup_bcm_patchram;
-               hdev->set_bdaddr = btusb_set_bdaddr_bcm;
+               hdev->set_bdaddr = btbcm_set_bdaddr;
                set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
        }