ARM: dts: omap3: Fix Card Detect and Write Protect on Logic PD SOM-LV

This fixes commit ab8dd3aed011 ("ARM: DTS: Add minimal Support for
Logic PD DM3730 SOM-LV") where the Card Detect and Write Protect
pins were improperly configured.

Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for
Logic PD DM3730 SOM-LV")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
index da8598402ab8b33137a74fac30a69432155fac17..38faa90007d7f0c7e3042a90aef486321cc4bfa0 100644 (file)
--- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
@@ -158,7 +158,7 @@
 &mmc1 {
        interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
        pinctrl-names = "default";
-       pinctrl-0 = <&mmc1_pins &mmc1_cd>;
+       pinctrl-0 = <&mmc1_pins>;
        wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;                /* gpio_126 */
        cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>;              /* gpio_110 */
        vmmc-supply = <&vmmc1>;
@@ -193,7 +193,8 @@
                        OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)        /* sdmmc1_dat1.sdmmc1_dat1 */
                        OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)        /* sdmmc1_dat2.sdmmc1_dat2 */
                        OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)        /* sdmmc1_dat3.sdmmc1_dat3 */
-                       OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_strobe.gpio_126 sdmmc1_wp*/
+                       OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_strobe.gpio_126 */
+                       OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d11.gpio_110 */
                >;
        };
 
@@ -242,12 +243,6 @@
                        OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* sys_boot6.gpio_8 */
                >;
        };
-
-       mmc1_cd: pinmux_mmc1_cd {
-               pinctrl-single,pins = <
-                       OMAP3_WKUP_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4)  /* cam_d11.gpio_110 */
-               >;
-       };
 };