serial: mcf: fix no driver name in probe output

The current output of the device probing looks like this:

ColdFire internal UART serial driver
(NULL device *): ttyS0 at MMIO 0xfc060000 (irq = 90, base_baud = 5208333) is a ColdFire UART
console [ttyS0] enabled
(NULL device *): ttyS1 at MMIO 0xfc064000 (irq = 91, base_baud = 5208333) is a ColdFire UART
(NULL device *): ttyS2 at MMIO 0xfc068000 (irq = 92, base_baud = 5208333) is a ColdFire UART

Fix the port device linkage at probing time so that the device name is
printed out properly, and not "(NULL device *)".

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c
index 35f4719b2c0e9eef76f924dcb6ee95b5824e2a73..a9b0ab38a68c1c529629d4ec526f51257d0efcdc 100644 (file)
--- a/drivers/tty/serial/mcf.c
+++ b/drivers/tty/serial/mcf.c
@@ -629,6 +629,7 @@ static int mcf_probe(struct platform_device *pdev)
                port->mapbase = platp[i].mapbase;
                port->membase = (platp[i].membase) ? platp[i].membase :
                        (unsigned char __iomem *) platp[i].mapbase;
+               port->dev = &pdev->dev;
                port->iotype = SERIAL_IO_MEM;
                port->irq = platp[i].irq;
                port->uartclk = MCF_BUSCLK;