dt-bindings: phy: Add a new property drive-impedance-ohm for RK's emmc PHY

This patch documents the new proprty drive-impedance-ohm for
Rockchip's eMMC PHY node.

Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
index e3ea55763b0ac5945b108d6f1d6a4fb443a8d9b2..e728786f21e0beaa9dcbe25a1a518e2c64d05e59 100644 (file)
--- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
@@ -7,12 +7,15 @@ Required properties:
  - reg: PHY register address offset and length in "general
    register files"
 
-Optional clocks using the clock bindings (see ../clock/clock-bindings.txt),
-specified by name:
+Optional properties:
  - clock-names: Should contain "emmcclk".  Although this is listed as optional
                (because most boards can get basic functionality without having
                access to it), it is strongly suggested.
+               See ../clock/clock-bindings.txt for details.
  - clocks: Should have a phandle to the card clock exported by the SDHCI driver.
+ - drive-impedance-ohm: Specifies the drive impedance in Ohm.
+                        Possible values are 33, 40, 50, 66 and 100.
+                        If not set, the default value of 50 will be applied.
 
 Example:
 
@@ -29,6 +32,7 @@ grf: syscon@ff770000 {
                reg = <0xf780 0x20>;
                clocks = <&sdhci>;
                clock-names = "emmcclk";
+               drive-impedance-ohm = <50>;
                #phy-cells = <0>;
        };
 };