Use write_devctl() method to clear/set the HOB bit in tf_read() method.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ide_hwif_t *hwif = drive->hwif;
struct ide_io_ports *io_ports = &hwif->io_ports;
struct ide_taskfile *tf = &cmd->tf;
- void (*tf_outb)(u8 addr, unsigned long port);
u8 (*tf_inb)(unsigned long port);
u8 valid = cmd->valid.in.tf;
u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
- if (mmio) {
- tf_outb = ide_mm_outb;
+ if (mmio)
tf_inb = ide_mm_inb;
- } else {
- tf_outb = ide_outb;
+ else
tf_inb = ide_inb;
- }
/* be sure we're looking at the low order bits */
- tf_outb(ATA_DEVCTL_OBS, io_ports->ctl_addr);
+ hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
if (valid & IDE_VALID_ERROR)
tf->error = tf_inb(io_ports->feature_addr);
tf->device = tf_inb(io_ports->device_addr);
if (cmd->tf_flags & IDE_TFLAG_LBA48) {
- tf_outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr);
+ hwif->tp_ops->write_devctl(hwif, ATA_HOB | ATA_DEVCTL_OBS);
tf = &cmd->hob;
valid = cmd->valid.in.hob;
u8 valid = cmd->valid.in.tf;
/* be sure we're looking at the low order bits */
- outb(ATA_DEVCTL_OBS, io_ports->ctl_addr);
+ ide_write_devctl(hwif, ATA_DEVCTL_OBS);
if (valid & IDE_VALID_ERROR)
tf->error = inb(io_ports->feature_addr);
tf->device = superio_ide_inb(io_ports->device_addr);
if (cmd->tf_flags & IDE_TFLAG_LBA48) {
- outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr);
+ ide_write_devctl(hwif, ATA_HOB | ATA_DEVCTL_OBS);
tf = &cmd->hob;
valid = cmd->valid.in.hob;
u8 valid = cmd->valid.in.tf;
/* be sure we're looking at the low order bits */
- scc_ide_outb(ATA_DEVCTL_OBS, io_ports->ctl_addr);
+ scc_write_devctl(hwif, ATA_DEVCTL_OBS);
if (valid & IDE_VALID_ERROR)
tf->error = scc_ide_inb(io_ports->feature_addr);
tf->device = scc_ide_inb(io_ports->device_addr);
if (cmd->tf_flags & IDE_TFLAG_LBA48) {
- scc_ide_outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr);
+ scc_write_devctl(hwif, ATA_HOB | ATA_DEVCTL_OBS);
tf = &cmd->hob;
valid = cmd->valid.in.hob;