orinoco: make firmware download less verbose

The firmware download code has been in a couple of releases, without any
significant issues reported in this code.

Convert to use pr_debug, so the messages can be recoverred by defining
DEBUG.

Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/orinoco/hermes_dld.c b/drivers/net/wireless/orinoco/hermes_dld.c
index a9ba195cdada70963503c6b6bbd0f41ddd4c5905..a3eefe109df451c5089c8608b11978a268a228d7 100644 (file)
--- a/drivers/net/wireless/orinoco/hermes_dld.c
+++ b/drivers/net/wireless/orinoco/hermes_dld.c
@@ -309,7 +309,7 @@ int hermes_read_pda(hermes_t *hw,
 
        /* Open auxiliary port */
        ret = hermes_aux_control(hw, 1);
-       printk(KERN_DEBUG PFX "AUX enable returned %d\n", ret);
+       pr_debug(PFX "AUX enable returned %d\n", ret);
        if (ret)
                return ret;
 
@@ -319,12 +319,12 @@ int hermes_read_pda(hermes_t *hw,
 
        /* Close aux port */
        ret = hermes_aux_control(hw, 0);
-       printk(KERN_DEBUG PFX "AUX disable returned %d\n", ret);
+       pr_debug(PFX "AUX disable returned %d\n", ret);
 
        /* Check PDA length */
        pda_size = le16_to_cpu(pda[0]);
-       printk(KERN_DEBUG PFX "Actual PDA length %d, Max allowed %d\n",
-              pda_size, pda_len);
+       pr_debug(PFX "Actual PDA length %d, Max allowed %d\n",
+                pda_size, pda_len);
        if (pda_size > pda_len)
                return -EINVAL;
 
@@ -422,20 +422,19 @@ int hermesi_program_init(hermes_t *hw, u32 offset)
                return err;
 
        err = hermes_aux_control(hw, 1);
-       printk(KERN_DEBUG PFX "AUX enable returned %d\n", err);
+       pr_debug(PFX "AUX enable returned %d\n", err);
 
        if (err)
                return err;
 
-       printk(KERN_DEBUG PFX "Enabling volatile, EP 0x%08x\n", offset);
+       pr_debug(KERN_DEBUG PFX "Enabling volatile, EP 0x%08x\n", offset);
        err = hermes_doicmd_wait(hw,
                                 HERMES_PROGRAM_ENABLE_VOLATILE,
                                 offset & 0xFFFFu,
                                 offset >> 16,
                                 0,
                                 NULL);
-       printk(KERN_DEBUG PFX "PROGRAM_ENABLE returned %d\n",
-              err);
+       pr_debug(PFX "PROGRAM_ENABLE returned %d\n", err);
 
        return err;
 }
@@ -454,16 +453,16 @@ int hermesi_program_end(hermes_t *hw)
 
        rc = hermes_docmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp);
 
-       printk(KERN_DEBUG PFX "PROGRAM_DISABLE returned %d, "
-              "r0 0x%04x, r1 0x%04x, r2 0x%04x\n",
-              rc, resp.resp0, resp.resp1, resp.resp2);
+       pr_debug(PFX "PROGRAM_DISABLE returned %d, "
+                "r0 0x%04x, r1 0x%04x, r2 0x%04x\n",
+                rc, resp.resp0, resp.resp1, resp.resp2);
 
        if ((rc == 0) &&
            ((resp.status & HERMES_STATUS_CMDCODE) != HERMES_CMD_DOWNLD))
                rc = -EIO;
 
        err = hermes_aux_control(hw, 0);
-       printk(KERN_DEBUG PFX "AUX disable returned %d\n", err);
+       pr_debug(PFX "AUX disable returned %d\n", err);
 
        /* Acknowledge any outstanding command */
        hermes_write_regn(hw, EVACK, 0xFFFF);
@@ -496,9 +495,8 @@ int hermes_program(hermes_t *hw, const char *first_block, const void *end)
 
        while ((blkaddr != BLOCK_END) &&
               (((void *) blk + blklen) <= end)) {
-               printk(KERN_DEBUG PFX
-                      "Programming block of length %d to address 0x%08x\n",
-                      blklen, blkaddr);
+               pr_debug(PFX "Programming block of length %d "
+                        "to address 0x%08x\n", blklen, blkaddr);
 
 #if !LIMIT_PROGRAM_SIZE
                /* wl_lkm driver splits this into writes of 2000 bytes */
@@ -510,10 +508,9 @@ int hermes_program(hermes_t *hw, const char *first_block, const void *end)
                addr = blkaddr;
 
                while (addr < (blkaddr + blklen)) {
-                       printk(KERN_DEBUG PFX
-                              "Programming subblock of length %d "
-                              "to address 0x%08x. Data @ %p\n",
-                              len, addr, &blk->data[addr - blkaddr]);
+                       pr_debug(PFX "Programming subblock of length %d "
+                                "to address 0x%08x. Data @ %p\n",
+                                len, addr, &blk->data[addr - blkaddr]);
 
                        hermes_aux_setaddr(hw, addr);
                        hermes_write_bytes(hw, HERMES_AUXDATA,
@@ -643,8 +640,8 @@ int hermes_apply_pda_with_defaults(hermes_t *hw,
 
                pdi = hermes_find_pdi(first_pdi, record_id, pda_end);
                if (pdi)
-                       printk(KERN_DEBUG PFX "Found record 0x%04x at %p\n",
-                              record_id, pdi);
+                       pr_debug(PFX "Found record 0x%04x at %p\n",
+                                record_id, pdi);
 
                switch (record_id) {
                case 0x110: /* Modem REFDAC values */
@@ -654,9 +651,9 @@ int hermes_apply_pda_with_defaults(hermes_t *hw,
                        default_pdi = NULL;
                        if (outdoor_pdi) {
                                pdi = outdoor_pdi;
-                               printk(KERN_DEBUG PFX
-                                      "Using outdoor record 0x%04x at %p\n",
-                                      record_id + 1, pdi);
+                               pr_debug(PFX
+                                        "Using outdoor record 0x%04x at %p\n",
+                                        record_id + 1, pdi);
                        }
                        break;
                case 0x5: /*  HWIF Compatiblity */
@@ -684,9 +681,8 @@ int hermes_apply_pda_with_defaults(hermes_t *hw,
                if (!pdi && default_pdi) {
                        /* Use default */
                        pdi = default_pdi;
-                       printk(KERN_DEBUG PFX
-                              "Using default record 0x%04x at %p\n",
-                              record_id, pdi);
+                       pr_debug(PFX "Using default record 0x%04x at %p\n",
+                                record_id, pdi);
                }
 
                if (pdi) {