Devices that expose their interrupt status registers via system
registers (e.g. Statistical profiling, CPU PMU, DynamIQ PMU, arch timer,
vgic (although unused by Linux), ...) rely on a context synchronising
operation on the CPU to ensure that the updated status register is
visible to the CPU when handling the interrupt. This usually happens as
a result of taking the IRQ exception in the first place, but there are
two race scenarios where this isn't the case.
For example, let's say we have two peripherals (X and Y), where Y uses a
system register for its interrupt status.
Case 1:
1. CPU takes an IRQ exception as a result of X raising an interrupt
2. Y then raises its interrupt line, but the update to its system
register is not yet visible to the CPU
3. The GIC decides to expose Y's interrupt number first in the Ack
register
4. The CPU runs the IRQ handler for Y, but the status register is stale
Case 2:
1. CPU takes an IRQ exception as a result of X raising an interrupt
2. CPU reads the interrupt number for X from the Ack register and runs
its IRQ handler
3. Y raises its interrupt line and the Ack register is updated, but
again, the update to its system register is not yet visible to the
CPU.
4. Since the GIC drivers poll the Ack register, we read Y's interrupt
number and run its handler without a context synchronisation
operation, therefore seeing the stale register value.
In either case, we run the risk of missing an IRQ. This patch solves the
problem by ensuring that we execute an ISB in the GIC drivers prior
to invoking the interrupt handler. This is already the case for GICv3
and EOIMode 1 (the usual case for the host).
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
if (static_key_true(&supports_deactivate))
gic_write_eoir(irqnr);
+ else
+ isb();
err = handle_domain_irq(gic_data.domain, irqnr, regs);
if (err) {
if (likely(irqnr > 15 && irqnr < 1020)) {
if (static_key_true(&supports_deactivate))
writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI);
+ isb();
handle_domain_irq(gic->domain, irqnr, regs);
continue;
}
goto out;
cascade_irq = irq_find_mapping(chip_data->domain, gic_irq);
- if (unlikely(gic_irq < 32 || gic_irq > 1020))
+ if (unlikely(gic_irq < 32 || gic_irq > 1020)) {
handle_bad_irq(desc);
- else
+ } else {
+ isb();
generic_handle_irq(cascade_irq);
+ }
out:
chained_irq_exit(chip, desc);