cx23885_i2c_register(&dev->i2c_bus[1]);
cx23885_i2c_register(&dev->i2c_bus[2]);
cx23885_card_setup(dev);
- call_all(dev, core, s_power, 0);
+ call_all(dev, tuner, standby);
cx23885_ir_init(dev);
if (dev->board == CX23885_BOARD_VIEWCAST_460E) {
fe1->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl;
#endif
- /* Put the analog decoder in standby to keep it quiet */
- call_all(dev, core, s_power, 0);
+ /* Put the tuner in standby to keep it quiet */
+ call_all(dev, tuner, standby);
if (fe0->dvb.frontend->ops.analog_ops.standby)
fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend);
ctl.fname);
call_all(core, tuner, s_config, &xc2028_cfg);
}
- call_all(core, core, s_power, 0);
+ call_all(core, tuner, standby);
}
/* ------------------------------------------------------------------ */
if (fe1)
fe1->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl;
- /* Put the analog decoder in standby to keep it quiet */
- call_all(core, core, s_power, 0);
+ /* Put the tuner in standby to keep it quiet */
+ call_all(core, tuner, standby);
/* register everything */
res = vb2_dvb_register_bus(&dev->frontends, THIS_MODULE, dev,
saa_andorb(SAA7134_OFMT_DATA_A, 0x1f, 0);
saa_andorb(SAA7134_OFMT_DATA_B, 0x1f, 0);
- saa_call_all(dev, core, s_power, 0);
+ saa_call_all(dev, tuner, standby);
if (vdev->vfl_type == VFL_TYPE_RADIO)
saa_call_all(dev, core, ioctl, SAA6588_CMD_CLOSE, &cmd);
mutex_unlock(&dev->lock);
return container_of(sd, struct e4000_dev, sd);
}
-static int e4000_s_power(struct v4l2_subdev *sd, int on)
+static int e4000_standby(struct v4l2_subdev *sd)
{
struct e4000_dev *dev = e4000_subdev_to_dev(sd);
- struct i2c_client *client = dev->client;
int ret;
- dev_dbg(&client->dev, "on=%d\n", on);
-
- if (on)
- ret = e4000_init(dev);
- else
- ret = e4000_sleep(dev);
+ ret = e4000_sleep(dev);
if (ret)
return ret;
return e4000_set_params(dev);
}
-static const struct v4l2_subdev_core_ops e4000_subdev_core_ops = {
- .s_power = e4000_s_power,
-};
-
static int e4000_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *v)
{
struct e4000_dev *dev = e4000_subdev_to_dev(sd);
}
static const struct v4l2_subdev_tuner_ops e4000_subdev_tuner_ops = {
+ .standby = e4000_standby,
.g_tuner = e4000_g_tuner,
.s_tuner = e4000_s_tuner,
.g_frequency = e4000_g_frequency,
};
static const struct v4l2_subdev_ops e4000_subdev_ops = {
- .core = &e4000_subdev_core_ops,
.tuner = &e4000_subdev_tuner_ops,
};
return container_of(sd, struct fc2580_dev, subdev);
}
-static int fc2580_s_power(struct v4l2_subdev *sd, int on)
+static int fc2580_standby(struct v4l2_subdev *sd)
{
struct fc2580_dev *dev = fc2580_subdev_to_dev(sd);
- struct i2c_client *client = dev->client;
int ret;
- dev_dbg(&client->dev, "on=%d\n", on);
-
- if (on)
- ret = fc2580_init(dev);
- else
- ret = fc2580_sleep(dev);
+ ret = fc2580_sleep(dev);
if (ret)
return ret;
return fc2580_set_params(dev);
}
-static const struct v4l2_subdev_core_ops fc2580_subdev_core_ops = {
- .s_power = fc2580_s_power,
-};
-
static int fc2580_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *v)
{
struct fc2580_dev *dev = fc2580_subdev_to_dev(sd);
}
static const struct v4l2_subdev_tuner_ops fc2580_subdev_tuner_ops = {
+ .standby = fc2580_standby,
.g_tuner = fc2580_g_tuner,
.s_tuner = fc2580_s_tuner,
.g_frequency = fc2580_g_frequency,
};
static const struct v4l2_subdev_ops fc2580_subdev_ops = {
- .core = &fc2580_subdev_core_ops,
.tuner = &fc2580_subdev_tuner_ops,
};
return ret;
}
-static int msi001_s_power(struct v4l2_subdev *sd, int on)
+static int msi001_standby(struct v4l2_subdev *sd)
{
struct msi001_dev *dev = sd_to_msi001_dev(sd);
- struct spi_device *spi = dev->spi;
- int ret;
-
- dev_dbg(&spi->dev, "on=%d\n", on);
-
- if (on)
- ret = 0;
- else
- ret = msi001_wreg(dev, 0x000000);
- return ret;
+ return msi001_wreg(dev, 0x000000);
}
-static const struct v4l2_subdev_core_ops msi001_core_ops = {
- .s_power = msi001_s_power,
-};
-
static int msi001_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *v)
{
struct msi001_dev *dev = sd_to_msi001_dev(sd);
}
static const struct v4l2_subdev_tuner_ops msi001_tuner_ops = {
+ .standby = msi001_standby,
.g_tuner = msi001_g_tuner,
.s_tuner = msi001_s_tuner,
.g_frequency = msi001_g_frequency,
};
static const struct v4l2_subdev_ops msi001_ops = {
- .core = &msi001_core_ops,
.tuner = &msi001_tuner_ops,
};
*/
ret = v4l_enable_media_source(vdev);
if (ret == 0)
- v4l2_device_call_all(&dev->v4l2_dev, 0, core,
- s_power, 0);
+ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner,
+ standby);
dev->std_set_in_tuner_core = 0;
/* When close the device, set the usb intf0 into alt0 to free
}
/* Save some power by putting tuner to sleep */
- call_all(dev, core, s_power, 0);
+ call_all(dev, tuner, standby);
/* do this before setting alternate! */
if (dev->USE_ISO)
goto exit;
/* Save some power by putting tuner to sleep */
- v4l2_device_call_all(&v4l2->v4l2_dev, 0, core, s_power, 0);
+ v4l2_device_call_all(&v4l2->v4l2_dev, 0, tuner, standby);
/* do this before setting alternate! */
em28xx_set_mode(dev, EM28XX_SUSPEND);
video_device_node_name(&v4l2->vbi_dev));
/* Save some power by putting tuner to sleep */
- v4l2_device_call_all(&v4l2->v4l2_dev, 0, core, s_power, 0);
+ v4l2_device_call_all(&v4l2->v4l2_dev, 0, tuner, standby);
/* initialize videobuf2 stuff */
em28xx_vb2_setup(dev);
*/
/**
- * tuner_s_power - controls the power state of the tuner
+ * tuner_standby - places the tuner in standby mode
* @sd: pointer to struct v4l2_subdev
- * @on: a zero value puts the tuner to sleep, non-zero wakes it up
*/
-static int tuner_s_power(struct v4l2_subdev *sd, int on)
+static int tuner_standby(struct v4l2_subdev *sd)
{
struct tuner *t = to_tuner(sd);
struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops;
- if (on) {
- if (t->standby && set_mode(t, t->mode) == 0) {
- dprintk("Waking up tuner\n");
- set_freq(t, 0);
- }
- return 0;
- }
-
dprintk("Putting tuner to sleep\n");
t->standby = true;
if (analog_ops->standby)
static const struct v4l2_subdev_core_ops tuner_core_ops = {
.log_status = tuner_log_status,
- .s_power = tuner_s_power,
};
static const struct v4l2_subdev_tuner_ops tuner_tuner_ops = {
+ .standby = tuner_standby,
.s_radio = tuner_s_radio,
.g_tuner = tuner_g_tuner,
.s_tuner = tuner_s_tuner,
* struct v4l2_subdev_tuner_ops - Callbacks used when v4l device was opened
* in radio mode.
*
+ * @standby: puts the tuner in standby mode. It will be woken up
+ * automatically the next time it is used.
+ *
* @s_radio: callback that switches the tuner to radio mode.
* drivers should explicitly call it when a tuner ops should
* operate on radio mode, before being able to handle it.
* }
*/
struct v4l2_subdev_tuner_ops {
+ int (*standby)(struct v4l2_subdev *sd);
int (*s_radio)(struct v4l2_subdev *sd);
int (*s_frequency)(struct v4l2_subdev *sd, const struct v4l2_frequency *freq);
int (*g_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq);