__le32 reserved;
} __packed; /* NVM_ACCESS_COMPLETE_CMD_API_S_VER_1 */
-/**
- * struct iwl_mcc_update_cmd_v1 - Request the device to update geographic
- * regulatory profile according to the given MCC (Mobile Country Code).
- * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain.
- * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the
- * MCC in the cmd response will be the relevant MCC in the NVM.
- * @mcc: given mobile country code
- * @source_id: the source from where we got the MCC, see iwl_mcc_source
- * @reserved: reserved for alignment
- */
-struct iwl_mcc_update_cmd_v1 {
- __le16 mcc;
- u8 source_id;
- u8 reserved;
-} __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_1 */
-
/**
* struct iwl_mcc_update_cmd - Request the device to update geographic
* regulatory profile according to the given MCC (Mobile Country Code).
} __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_2 */
/**
- * struct iwl_mcc_update_resp_v1 - response to MCC_UPDATE_CMD.
+ * enum iwl_geo_information - geographic information.
+ * @GEO_NO_INFO: no special info for this geo profile.
+ * @GEO_WMM_ETSI_5GHZ_INFO: this geo profile limits the WMM params
+ * for the 5 GHz band.
+ */
+enum iwl_geo_information {
+ GEO_NO_INFO = 0,
+ GEO_WMM_ETSI_5GHZ_INFO = BIT(0),
+};
+
+/**
+ * struct iwl_mcc_update_resp_v3 - response to MCC_UPDATE_CMD.
* Contains the new channel control profile map, if changed, and the new MCC
* (mobile country code).
* The new MCC may be different than what was requested in MCC_UPDATE_CMD.
* @mcc: the new applied MCC
* @cap: capabilities for all channels which matches the MCC
* @source_id: the MCC source, see iwl_mcc_source
- * @n_channels: number of channels in @channels_data (may be 14, 39, 50 or 51
- * channels, depending on platform)
+ * @time: time elapsed from the MCC test start (in units of 30 seconds)
+ * @geo_info: geographic specific profile information
+ * see &enum iwl_geo_information.
+ * @n_channels: number of channels in @channels_data.
* @channels: channel control data map, DWORD for each channel. Only the first
* 16bits are used.
*/
-struct iwl_mcc_update_resp_v1 {
+struct iwl_mcc_update_resp_v3 {
__le32 status;
__le16 mcc;
u8 cap;
u8 source_id;
+ __le16 time;
+ __le16 geo_info;
__le32 n_channels;
__le32 channels[0];
-} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_1 */
-
-/**
- * enum iwl_geo_information - geographic information.
- * @GEO_NO_INFO: no special info for this geo profile.
- * @GEO_WMM_ETSI_5GHZ_INFO: this geo profile limits the WMM params
- * for the 5 GHz band.
- */
-enum iwl_geo_information {
- GEO_NO_INFO = 0,
- GEO_WMM_ETSI_5GHZ_INFO = BIT(0),
-};
+} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_3 */
/**
* struct iwl_mcc_update_resp - response to MCC_UPDATE_CMD.
* @status: see &enum iwl_mcc_update_status
* @mcc: the new applied MCC
* @cap: capabilities for all channels which matches the MCC
- * @source_id: the MCC source, see iwl_mcc_source
- * @time: time elapsed from the MCC test start (in 30 seconds TU)
+ * @time: time elapsed from the MCC test start (in units of 30 seconds)
* @geo_info: geographic specific profile information
* see &enum iwl_geo_information.
- * @n_channels: number of channels in @channels_data (may be 14, 39, 50 or 51
- * channels, depending on platform)
+ * @source_id: the MCC source, see iwl_mcc_source
+ * @reserved: for four bytes alignment.
+ * @n_channels: number of channels in @channels_data.
* @channels: channel control data map, DWORD for each channel. Only the first
* 16bits are used.
*/
struct iwl_mcc_update_resp {
__le32 status;
__le16 mcc;
- u8 cap;
- u8 source_id;
+ __le16 cap;
__le16 time;
__le16 geo_info;
+ u8 source_id;
+ u8 reserved[3];
__le32 n_channels;
__le32 channels[0];
-} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_3 */
+} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_4 */
/**
* struct iwl_mcc_chub_notif - chub notifies of mcc change
* antenna the beacon should be transmitted
* @IWL_UCODE_TLV_CAPA_BEACON_STORING: firmware will store the latest beacon
* from AP and will send it upon d0i3 exit.
- * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT_V2: support LAR API V2
+ * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT_V3: support LAR API V3
* @IWL_UCODE_TLV_CAPA_CT_KILL_BY_FW: firmware responsible for CT-kill
* @IWL_UCODE_TLV_CAPA_TEMP_THS_REPORT_SUPPORT: supports temperature
* thresholds reporting
* power reduction.
* @IWL_UCODE_TLV_CAPA_MLME_OFFLOAD: supports MLME offload
* @IWL_UCODE_TLV_CAPA_D3_DEBUG: supports debug recording during D3
+ * @IWL_UCODE_TLV_CAPA_MCC_UPDATE_11AX_SUPPORT: MCC response support 11ax
+ * capability.
*
* @NUM_IWL_UCODE_TLV_CAPA: number of bits used
*/
IWL_UCODE_TLV_CAPA_CSA_AND_TBTT_OFFLOAD = (__force iwl_ucode_tlv_capa_t)70,
IWL_UCODE_TLV_CAPA_BEACON_ANT_SELECTION = (__force iwl_ucode_tlv_capa_t)71,
IWL_UCODE_TLV_CAPA_BEACON_STORING = (__force iwl_ucode_tlv_capa_t)72,
- IWL_UCODE_TLV_CAPA_LAR_SUPPORT_V2 = (__force iwl_ucode_tlv_capa_t)73,
+ IWL_UCODE_TLV_CAPA_LAR_SUPPORT_V3 = (__force iwl_ucode_tlv_capa_t)73,
IWL_UCODE_TLV_CAPA_CT_KILL_BY_FW = (__force iwl_ucode_tlv_capa_t)74,
IWL_UCODE_TLV_CAPA_TEMP_THS_REPORT_SUPPORT = (__force iwl_ucode_tlv_capa_t)75,
IWL_UCODE_TLV_CAPA_CTDP_SUPPORT = (__force iwl_ucode_tlv_capa_t)76,
IWL_UCODE_TLV_CAPA_TX_POWER_ACK = (__force iwl_ucode_tlv_capa_t)84,
IWL_UCODE_TLV_CAPA_D3_DEBUG = (__force iwl_ucode_tlv_capa_t)87,
IWL_UCODE_TLV_CAPA_LED_CMD_SUPPORT = (__force iwl_ucode_tlv_capa_t)88,
+ IWL_UCODE_TLV_CAPA_MCC_UPDATE_11AX_SUPPORT = (__force iwl_ucode_tlv_capa_t)89,
IWL_UCODE_TLV_CAPA_MLME_OFFLOAD = (__force iwl_ucode_tlv_capa_t)96,
NUM_IWL_UCODE_TLV_CAPA
u32 status;
int resp_len, n_channels;
u16 mcc;
- bool resp_v2 = fw_has_capa(&mvm->fw->ucode_capa,
- IWL_UCODE_TLV_CAPA_LAR_SUPPORT_V2);
if (WARN_ON_ONCE(!iwl_mvm_is_lar_supported(mvm)))
return ERR_PTR(-EOPNOTSUPP);
cmd.len[0] = sizeof(struct iwl_mcc_update_cmd);
- if (!resp_v2)
- cmd.len[0] = sizeof(struct iwl_mcc_update_cmd_v1);
IWL_DEBUG_LAR(mvm, "send MCC update to FW with '%c%c' src = %d\n",
alpha2[0], alpha2[1], src_id);
pkt = cmd.resp_pkt;
/* Extract MCC response */
- if (resp_v2) {
+ if (fw_has_capa(&mvm->fw->ucode_capa,
+ IWL_UCODE_TLV_CAPA_MCC_UPDATE_11AX_SUPPORT)) {
struct iwl_mcc_update_resp *mcc_resp = (void *)pkt->data;
n_channels = __le32_to_cpu(mcc_resp->n_channels);
goto exit;
}
} else {
- struct iwl_mcc_update_resp_v1 *mcc_resp_v1 = (void *)pkt->data;
+ struct iwl_mcc_update_resp_v3 *mcc_resp_v3 = (void *)pkt->data;
- n_channels = __le32_to_cpu(mcc_resp_v1->n_channels);
+ n_channels = __le32_to_cpu(mcc_resp_v3->n_channels);
resp_len = sizeof(struct iwl_mcc_update_resp) +
n_channels * sizeof(__le32);
resp_cp = kzalloc(resp_len, GFP_KERNEL);
goto exit;
}
- resp_cp->status = mcc_resp_v1->status;
- resp_cp->mcc = mcc_resp_v1->mcc;
- resp_cp->cap = mcc_resp_v1->cap;
- resp_cp->source_id = mcc_resp_v1->source_id;
- resp_cp->n_channels = mcc_resp_v1->n_channels;
- memcpy(resp_cp->channels, mcc_resp_v1->channels,
+ resp_cp->status = mcc_resp_v3->status;
+ resp_cp->mcc = mcc_resp_v3->mcc;
+ resp_cp->cap = cpu_to_le16(mcc_resp_v3->cap);
+ resp_cp->source_id = mcc_resp_v3->source_id;
+ resp_cp->time = mcc_resp_v3->time;
+ resp_cp->geo_info = mcc_resp_v3->geo_info;
+ resp_cp->n_channels = mcc_resp_v3->n_channels;
+ memcpy(resp_cp->channels, mcc_resp_v3->channels,
n_channels * sizeof(__le32));
}
projects / openwrt / staging / blogic.git / commitdiff