selftests: mlxsw: Add rtnetlink tests

Add a new test that is focused on rtnetlink configuration. Its purpose
is to test valid and invalid (as deemed by mlxsw) configurations and
make sure that they succeed / fail without producing a trace.

Some of the test cases are derived from recent fixes in order to make
sure that the fixed bugs are not introduced again.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh b/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh
index 7f78b96279f35a99d583247f180a676a8f4fa818..9040bfbddfbaa15e391f21dc7eba5ec1f0cff50a 100755 (executable)
--- a/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh
@@ -13,9 +13,23 @@ ALL_TESTS="
        rif_set_addr_test
        rif_inherit_bridge_addr_test
        rif_non_inherit_bridge_addr_test
+       vlan_interface_deletion_test
+       bridge_deletion_test
+       bridge_vlan_flags_test
+       vlan_1_test
+       lag_bridge_upper_test
+       duplicate_vlans_test
+       vlan_rif_refcount_test
+       subport_rif_refcount_test
+       vlan_dev_deletion_test
+       lag_unlink_slaves_test
+       lag_dev_deletion_test
+       vlan_interface_uppers_test
+       devlink_reload_test
 "
 NUM_NETIFS=2
 source $lib_dir/lib.sh
+source $lib_dir/devlink_lib.sh
 
 setup_prepare()
 {
@@ -160,6 +174,384 @@ rif_non_inherit_bridge_addr_test()
        ip addr del dev $swp1 192.0.2.1/28
 }
 
+vlan_interface_deletion_test()
+{
+       # Test that when a VLAN interface is deleted, its associated router
+       # interface (RIF) is correctly deleted and not leaked. See commit
+       # c360867ec46a ("mlxsw: spectrum: Delete RIF when VLAN device is
+       # removed") for more details
+       RET=0
+
+       ip link add name br0 type bridge vlan_filtering 1
+       ip link set dev $swp1 master br0
+
+       ip link add link br0 name br0.10 type vlan id 10
+       ip -6 address add 2001:db8:1::1/64 dev br0.10
+       ip link del dev br0.10
+
+       # If we leaked the previous RIF, then this should produce a trace
+       ip link add link br0 name br0.20 type vlan id 20
+       ip -6 address add 2001:db8:1::1/64 dev br0.20
+       ip link del dev br0.20
+
+       log_test "vlan interface deletion"
+
+       ip link del dev br0
+}
+
+bridge_deletion_test()
+{
+       # Test that when a bridge with VLAN interfaces is deleted, we correctly
+       # delete the associated RIFs. See commit 602b74eda813 ("mlxsw:
+       # spectrum_switchdev: Do not leak RIFs when removing bridge") for more
+       # details
+       RET=0
+
+       ip link add name br0 type bridge vlan_filtering 1
+       ip link set dev $swp1 master br0
+       ip -6 address add 2001:db8::1/64 dev br0
+
+       ip link add link br0 name br0.10 type vlan id 10
+       ip -6 address add 2001:db8:1::1/64 dev br0.10
+
+       ip link add link br0 name br0.20 type vlan id 20
+       ip -6 address add 2001:db8:2::1/64 dev br0.20
+
+       ip link del dev br0
+
+       # If we leaked previous RIFs, then this should produce a trace
+       ip -6 address add 2001:db8:1::1/64 dev $swp1
+       ip -6 address del 2001:db8:1::1/64 dev $swp1
+
+       log_test "bridge deletion"
+}
+
+bridge_vlan_flags_test()
+{
+       # Test that when bridge VLAN flags are toggled, we do not take
+       # unnecessary references on related structs. See commit 9e25826ffc94
+       # ("mlxsw: spectrum_switchdev: Fix port_vlan refcounting") for more
+       # details
+       RET=0
+
+       ip link add name br0 type bridge vlan_filtering 1
+       ip link set dev $swp1 master br0
+
+       bridge vlan add vid 10 dev $swp1 pvid untagged
+       bridge vlan add vid 10 dev $swp1 untagged
+       bridge vlan add vid 10 dev $swp1 pvid
+       bridge vlan add vid 10 dev $swp1
+       ip link del dev br0
+
+       # If we did not handle references correctly, then this should produce a
+       # trace
+       devlink dev reload "$DEVLINK_DEV"
+
+       # Allow netdevices to be re-created following the reload
+       sleep 20
+
+       log_test "bridge vlan flags"
+}
+
+vlan_1_test()
+{
+       # Test that VLAN 1 cannot be configured, as it is used internally for
+       # untagged traffic. See commit 47bf9df2e820 ("mlxsw: spectrum: Forbid
+       # creation of VLAN 1 over port/LAG") for more details
+       RET=0
+
+       ip link add link $swp1 name $swp1.1 type vlan id 1 &> /dev/null
+       check_fail $? "managed to create vlan 1 when should not"
+
+       log_test "vlan 1"
+}
+
+lag_bridge_upper_test()
+{
+       # Test that ports cannot be enslaved to LAG devices that have uppers
+       # and that failure is handled gracefully. See commit b3529af6bb0d
+       # ("spectrum: Reference count VLAN entries") for more details
+       RET=0
+
+       ip link add name bond1 type bond mode 802.3ad
+
+       ip link add name br0 type bridge vlan_filtering 1
+       ip link set dev bond1 master br0
+
+       ip link set dev $swp1 down
+       ip link set dev $swp1 master bond1 &> /dev/null
+       check_fail $? "managed to enslave port to lag when should not"
+
+       # This might generate a trace, if we did not handle the failure
+       # correctly
+       ip -6 address add 2001:db8:1::1/64 dev $swp1
+       ip -6 address del 2001:db8:1::1/64 dev $swp1
+
+       log_test "lag with bridge upper"
+
+       ip link del dev br0
+       ip link del dev bond1
+}
+
+duplicate_vlans_test()
+{
+       # Test that on a given port a VLAN is only used once. Either as VLAN
+       # in a VLAN-aware bridge or as a VLAN device
+       RET=0
+
+       ip link add name br0 type bridge vlan_filtering 1
+       ip link set dev $swp1 master br0
+       bridge vlan add vid 10 dev $swp1
+
+       ip link add link $swp1 name $swp1.10 type vlan id 10 &> /dev/null
+       check_fail $? "managed to create vlan device when should not"
+
+       bridge vlan del vid 10 dev $swp1
+       ip link add link $swp1 name $swp1.10 type vlan id 10
+       check_err $? "did not manage to create vlan device when should"
+       bridge vlan add vid 10 dev $swp1 &> /dev/null
+       check_fail $? "managed to add bridge vlan when should not"
+
+       log_test "duplicate vlans"
+
+       ip link del dev $swp1.10
+       ip link del dev br0
+}
+
+vlan_rif_refcount_test()
+{
+       # Test that RIFs representing VLAN interfaces are not affected from
+       # ports member in the VLAN. We use the offload indication on routes
+       # configured on the RIF to understand if it was created / destroyed
+       RET=0
+
+       ip link add name br0 type bridge vlan_filtering 1
+       ip link set dev $swp1 master br0
+
+       ip link set dev $swp1 up
+       ip link set dev br0 up
+
+       ip link add link br0 name br0.10 up type vlan id 10
+       ip -6 address add 2001:db8:1::1/64 dev br0.10
+
+       ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 | grep -q offload
+       check_err $? "vlan rif was not created before adding port to vlan"
+
+       bridge vlan add vid 10 dev $swp1
+       ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 | grep -q offload
+       check_err $? "vlan rif was destroyed after adding port to vlan"
+
+       bridge vlan del vid 10 dev $swp1
+       ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 | grep -q offload
+       check_err $? "vlan rif was destroyed after removing port from vlan"
+
+       ip link set dev $swp1 nomaster
+       ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 | grep -q offload
+       check_fail $? "vlan rif was not destroyed after unlinking port from bridge"
+
+       log_test "vlan rif refcount"
+
+       ip link del dev br0.10
+       ip link set dev $swp1 down
+       ip link del dev br0
+}
+
+subport_rif_refcount_test()
+{
+       # Test that RIFs representing upper devices of physical ports are
+       # reference counted correctly and destroyed when should. We use the
+       # offload indication on routes configured on the RIF to understand if
+       # it was created / destroyed
+       RET=0
+
+       ip link add name bond1 type bond mode 802.3ad
+       ip link set dev $swp1 down
+       ip link set dev $swp2 down
+       ip link set dev $swp1 master bond1
+       ip link set dev $swp2 master bond1
+
+       ip link set dev bond1 up
+       ip link add link bond1 name bond1.10 up type vlan id 10
+       ip -6 address add 2001:db8:1::1/64 dev bond1
+       ip -6 address add 2001:db8:2::1/64 dev bond1.10
+
+       ip -6 route get fibmatch 2001:db8:1::2 dev bond1 | grep -q offload
+       check_err $? "subport rif was not created on lag device"
+       ip -6 route get fibmatch 2001:db8:2::2 dev bond1.10 | grep -q offload
+       check_err $? "subport rif was not created on vlan device"
+
+       ip link set dev $swp1 nomaster
+       ip -6 route get fibmatch 2001:db8:1::2 dev bond1 | grep -q offload
+       check_err $? "subport rif of lag device was destroyed when should not"
+       ip -6 route get fibmatch 2001:db8:2::2 dev bond1.10 | grep -q offload
+       check_err $? "subport rif of vlan device was destroyed when should not"
+
+       ip link set dev $swp2 nomaster
+       ip -6 route get fibmatch 2001:db8:1::2 dev bond1 | grep -q offload
+       check_fail $? "subport rif of lag device was not destroyed when should"
+       ip -6 route get fibmatch 2001:db8:2::2 dev bond1.10 | grep -q offload
+       check_fail $? "subport rif of vlan device was not destroyed when should"
+
+       log_test "subport rif refcount"
+
+       ip link del dev bond1.10
+       ip link del dev bond1
+}
+
+vlan_dev_deletion_test()
+{
+       # Test that VLAN devices are correctly deleted / unlinked when enslaved
+       # to bridge
+       RET=0
+
+       ip link add name br10 type bridge
+       ip link add name br20 type bridge
+       ip link add name br30 type bridge
+       ip link add link $swp1 name $swp1.10 type vlan id 10
+       ip link add link $swp1 name $swp1.20 type vlan id 20
+       ip link add link $swp1 name $swp1.30 type vlan id 30
+       ip link set dev $swp1.10 master br10
+       ip link set dev $swp1.20 master br20
+       ip link set dev $swp1.30 master br30
+
+       # If we did not handle the situation correctly, then these operations
+       # might produce a trace
+       ip link set dev $swp1.30 nomaster
+       ip link del dev $swp1.20
+       # Deletion via ioctl uses different code paths from netlink
+       vconfig rem $swp1.10 &> /dev/null
+
+       log_test "vlan device deletion"
+
+       ip link del dev $swp1.30
+       ip link del dev br30
+       ip link del dev br20
+       ip link del dev br10
+}
+
+lag_create()
+{
+       ip link add name bond1 type bond mode 802.3ad
+       ip link set dev $swp1 down
+       ip link set dev $swp2 down
+       ip link set dev $swp1 master bond1
+       ip link set dev $swp2 master bond1
+
+       ip link add link bond1 name bond1.10 type vlan id 10
+       ip link add link bond1 name bond1.20 type vlan id 20
+
+       ip link add name br0 type bridge vlan_filtering 1
+       ip link set dev bond1 master br0
+
+       ip link add name br10 type bridge
+       ip link set dev bond1.10 master br10
+
+       ip link add name br20 type bridge
+       ip link set dev bond1.20 master br20
+}
+
+lag_unlink_slaves_test()
+{
+       # Test that ports are correctly unlinked from their LAG master, when
+       # the LAG and its VLAN uppers are enslaved to bridges
+       RET=0
+
+       lag_create
+
+       ip link set dev $swp1 nomaster
+       check_err $? "lag slave $swp1 was not unlinked from master"
+       ip link set dev $swp2 nomaster
+       check_err $? "lag slave $swp2 was not unlinked from master"
+
+       # Try to configure corresponding VLANs as router interfaces
+       ip -6 address add 2001:db8:1::1/64 dev $swp1
+       check_err $? "failed to configure ip address on $swp1"
+
+       ip link add link $swp1 name $swp1.10 type vlan id 10
+       ip -6 address add 2001:db8:10::1/64 dev $swp1.10
+       check_err $? "failed to configure ip address on $swp1.10"
+
+       ip link add link $swp1 name $swp1.20 type vlan id 20
+       ip -6 address add 2001:db8:20::1/64 dev $swp1.20
+       check_err $? "failed to configure ip address on $swp1.20"
+
+       log_test "lag slaves unlinking"
+
+       ip link del dev $swp1.20
+       ip link del dev $swp1.10
+       ip address flush dev $swp1
+
+       ip link del dev br20
+       ip link del dev br10
+       ip link del dev br0
+       ip link del dev bond1
+}
+
+lag_dev_deletion_test()
+{
+       # Test that LAG device is correctly deleted, when the LAG and its VLAN
+       # uppers are enslaved to bridges
+       RET=0
+
+       lag_create
+
+       ip link del dev bond1
+
+       log_test "lag device deletion"
+
+       ip link del dev br20
+       ip link del dev br10
+       ip link del dev br0
+}
+
+vlan_interface_uppers_test()
+{
+       # Test that uppers of a VLAN interface are correctly sanitized
+       RET=0
+
+       ip link add name br0 type bridge vlan_filtering 1
+       ip link set dev $swp1 master br0
+
+       ip link add link br0 name br0.10 type vlan id 10
+       ip link add link br0.10 name macvlan0 \
+               type macvlan mode private &> /dev/null
+       check_fail $? "managed to create a macvlan when should not"
+
+       ip -6 address add 2001:db8:1::1/64 dev br0.10
+       ip link add link br0.10 name macvlan0 type macvlan mode private
+       check_err $? "did not manage to create a macvlan when should"
+
+       ip link del dev macvlan0
+
+       ip link add name vrf-test type vrf table 10
+       ip link set dev br0.10 master vrf-test
+       check_err $? "did not manage to enslave vlan interface to vrf"
+       ip link del dev vrf-test
+
+       ip link add name br-test type bridge
+       ip link set dev br0.10 master br-test &> /dev/null
+       check_fail $? "managed to enslave vlan interface to bridge when should not"
+       ip link del dev br-test
+
+       log_test "vlan interface uppers"
+
+       ip link del dev br0
+}
+
+devlink_reload_test()
+{
+       # Test that after executing all the above configuration tests, a
+       # devlink reload can be performed without errors
+       RET=0
+
+       devlink dev reload "$DEVLINK_DEV"
+       check_err $? "devlink reload failed"
+
+       log_test "devlink reload - last test"
+
+       sleep 20
+}
+
 trap cleanup EXIT
 
 setup_prepare