powerpc/e6500: Work around erratum A-008139

Erratum A-008139 can cause duplicate TLB entries if an indirect
entry is overwritten using tlbwe while the other thread is using it to
do a lookup.  Work around this by using tlbilx to invalidate prior
to overwriting.

To avoid the need to save another register to hold MAS1 during the
workaround code, TID clearing has been moved from tlb_miss_kernel_e6500
until after the SMT section.

Signed-off-by: Scott Wood <scottwood@freescale.com>

diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index 57c4d662be33598e72d7012a1e0f6d44b7319312..89bf95bd63b1f6bac752956bbea522f31093487d 100644 (file)
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -299,7 +299,9 @@ itlb_miss_fault_bolted:
  * r10 = crap (free to use)
  */
 tlb_miss_common_e6500:
-BEGIN_FTR_SECTION
+       crmove  cr2*4+2,cr0*4+2         /* cr2.eq != 0 if kernel address */
+
+BEGIN_FTR_SECTION              /* CPU_FTR_SMT */
        /*
         * Search if we already have an indirect entry for that virtual
         * address, and if we do, bail out.
@@ -324,17 +326,62 @@ BEGIN_FTR_SECTION
        b       1b
        .previous
 
+       /*
+        * Erratum A-008139 says that we can't use tlbwe to change
+        * an indirect entry in any way (including replacing or
+        * invalidating) if the other thread could be in the process
+        * of a lookup.  The workaround is to invalidate the entry
+        * with tlbilx before overwriting.
+        */
+
+       lbz     r15,TCD_ESEL_NEXT(r11)
+       rlwinm  r10,r15,16,0xff0000
+       oris    r10,r10,MAS0_TLBSEL(1)@h
+       mtspr   SPRN_MAS0,r10
+       isync
+       tlbre
        mfspr   r15,SPRN_MAS1
-       mfspr   r10,SPRN_MAS2
+       andis.  r15,r15,MAS1_VALID@h
+       beq     5f
+
+BEGIN_FTR_SECTION_NESTED(532)
+       mfspr   r10,SPRN_MAS8
+       rlwinm  r10,r10,0,0x80000fff  /* tgs,tlpid -> sgs,slpid */
+       mtspr   SPRN_MAS5,r10
+END_FTR_SECTION_NESTED(CPU_FTR_EMB_HV,CPU_FTR_EMB_HV,532)
 
-       tlbsx   0,r16
-       mtspr   SPRN_MAS2,r10
        mfspr   r10,SPRN_MAS1
-       mtspr   SPRN_MAS1,r15
+       rlwinm  r15,r10,0,0x3fff0000  /* tid -> spid */
+       rlwimi  r15,r10,20,0x00000003 /* ind,ts -> sind,sas */
+       mfspr   r10,SPRN_MAS6
+       mtspr   SPRN_MAS6,r15
+
+       mfspr   r15,SPRN_MAS2
+       isync
+       tlbilxva 0,r15
+       isync
+
+       mtspr   SPRN_MAS6,r10
 
-       andis.  r10,r10,MAS1_VALID@h
+5:
+BEGIN_FTR_SECTION_NESTED(532)
+       li      r10,0
+       mtspr   SPRN_MAS8,r10
+       mtspr   SPRN_MAS5,r10
+END_FTR_SECTION_NESTED(CPU_FTR_EMB_HV,CPU_FTR_EMB_HV,532)
+
+       tlbsx   0,r16
+       mfspr   r10,SPRN_MAS1
+       andis.  r15,r10,MAS1_VALID@h
        bne     tlb_miss_done_e6500
-END_FTR_SECTION_IFSET(CPU_FTR_SMT)
+FTR_SECTION_ELSE
+       mfspr   r10,SPRN_MAS1
+ALT_FTR_SECTION_END_IFSET(CPU_FTR_SMT)
+
+       oris    r10,r10,MAS1_VALID@h
+       beq     cr2,4f
+       rlwinm  r10,r10,0,16,1          /* Clear TID */
+4:     mtspr   SPRN_MAS1,r10
 
        /* Now, we need to walk the page tables. First check if we are in
         * range.
@@ -410,12 +457,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_SMT)
        rfi
 
 tlb_miss_kernel_e6500:
-       mfspr   r10,SPRN_MAS1
        ld      r14,PACA_KERNELPGD(r13)
-       cmpldi  cr0,r15,8               /* Check for vmalloc region */
-       rlwinm  r10,r10,0,16,1          /* Clear TID */
-       mtspr   SPRN_MAS1,r10
-       beq+    tlb_miss_common_e6500
+       cmpldi  cr1,r15,8               /* Check for vmalloc region */
+       beq+    cr1,tlb_miss_common_e6500
 
 tlb_miss_fault_e6500:
        tlb_unlock_e6500