--- /dev/null
+/*
+ * linux/arch/arm/mach-omap2/board-ldp.c
+ *
+ * Copyright (C) 2008 Texas Instruments Inc.
+ * Nishant Kamat <nskamat@ti.com>
+ *
+ * Modified from mach-omap2/board-3430sdp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/workqueue.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board-ldp.h>
+#include <mach/mcspi.h>
+#include <mach/gpio.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/gpmc.h>
+
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <mach/control.h>
+
+static void __init omap_ldp_init_irq(void)
+{
+ omap2_init_common_hw();
+ omap_init_irq();
+ omap_gpio_init();
+}
+
+static struct omap_uart_config ldp_uart_config __initdata = {
+ .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_board_config_kernel ldp_config[] __initdata = {
+ { OMAP_TAG_UART, &ldp_uart_config },
+};
+
+static int __init omap_i2c_init(void)
+{
+ omap_register_i2c_bus(1, 2600, NULL, 0);
+ omap_register_i2c_bus(2, 400, NULL, 0);
+ omap_register_i2c_bus(3, 400, NULL, 0);
+ return 0;
+}
+
+static void __init omap_ldp_init(void)
+{
+ omap_i2c_init();
+ omap_board_config = ldp_config;
+ omap_board_config_size = ARRAY_SIZE(ldp_config);
+ omap_serial_init();
+}
+
+static void __init omap_ldp_map_io(void)
+{
+ omap2_set_globals_343x();
+ omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_LDP, "OMAP LDP board")
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap_ldp_map_io,
+ .init_irq = omap_ldp_init_irq,
+ .init_machine = omap_ldp_init,
+ .timer = &omap_timer,
+MACHINE_END
--- /dev/null
+/*
+ * arch/arm/plat-omap/include/mach/board-ldp.h
+ *
+ * Hardware definitions for TI OMAP3 LDP.
+ *
+ * Copyright (C) 2008 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_LDP_H
+#define __ASM_ARCH_OMAP_LDP_H
+
+extern void twl4030_bci_battery_init(void);
+
+#define TWL4030_IRQNUM INT_34XX_SYS_NIRQ
+
+#endif /* __ASM_ARCH_OMAP_LDP_H */
projects / openwrt / staging / blogic.git / commitdiff