net: mvneta: add flow control support

Add support for flow control to mvneta.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 73643dbd5cb0d57949b64f86fbff6f886ac6fe86..0b8701d3ba38687d777a715c9604e560d6f091a8 100644 (file)
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -3211,6 +3211,8 @@ static void mvneta_validate(struct net_device *ndev, unsigned long *supported,
        phylink_set(mask, Autoneg);
        phylink_set_port_modes(mask);
 
+       /* Asymmetric pause is unsupported */
+       phylink_set(mask, Pause);
        /* Half-duplex at speeds higher than 100Mbit is unsupported */
        phylink_set(mask, 1000baseT_Full);
        phylink_set(mask, 1000baseX_Full);
@@ -3249,6 +3251,10 @@ static int mvneta_mac_link_state(struct net_device *ndev,
        state->duplex = !!(gmac_stat & MVNETA_GMAC_FULL_DUPLEX);
 
        state->pause = 0;
+       if (gmac_stat & MVNETA_GMAC_RX_FLOW_CTRL_ENABLE)
+               state->pause |= MLO_PAUSE_RX;
+       if (gmac_stat & MVNETA_GMAC_TX_FLOW_CTRL_ENABLE)
+               state->pause |= MLO_PAUSE_TX;
 
        return 1;
 }
@@ -3298,6 +3304,11 @@ static void mvneta_mac_config(struct net_device *ndev, unsigned int mode,
            phy_interface_mode_is_8023z(state->interface))
                new_ctrl2 |= MVNETA_GMAC2_PCS_ENABLE;
 
+       if (phylink_test(state->advertising, Pause))
+               new_an |= MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL;
+       if (state->pause & MLO_PAUSE_TXRX_MASK)
+               new_an |= MVNETA_GMAC_CONFIG_FLOW_CTRL;
+
        if (!phylink_autoneg_inband(mode)) {
                /* Phy or fixed speed */
                if (state->duplex)
@@ -3326,6 +3337,9 @@ static void mvneta_mac_config(struct net_device *ndev, unsigned int mode,
                         MVNETA_GMAC_CONFIG_GMII_SPEED |
                         /* The MAC only supports FD mode */
                         MVNETA_GMAC_CONFIG_FULL_DUPLEX;
+
+               if (state->pause & MLO_PAUSE_AN && state->an_enabled)
+                       new_an |= MVNETA_GMAC_AN_FLOW_CTRL_EN;
        }
 
        /* Armada 370 documentation says we can only change the port mode
@@ -3813,6 +3827,22 @@ static int mvneta_ethtool_set_ringparam(struct net_device *dev,
        return 0;
 }
 
+static void mvneta_ethtool_get_pauseparam(struct net_device *dev,
+                                         struct ethtool_pauseparam *pause)
+{
+       struct mvneta_port *pp = netdev_priv(dev);
+
+       phylink_ethtool_get_pauseparam(pp->phylink, pause);
+}
+
+static int mvneta_ethtool_set_pauseparam(struct net_device *dev,
+                                        struct ethtool_pauseparam *pause)
+{
+       struct mvneta_port *pp = netdev_priv(dev);
+
+       return phylink_ethtool_set_pauseparam(pp->phylink, pause);
+}
+
 static void mvneta_ethtool_get_strings(struct net_device *netdev, u32 sset,
                                       u8 *data)
 {
@@ -4021,6 +4051,8 @@ static const struct ethtool_ops mvneta_eth_tool_ops = {
        .get_drvinfo    = mvneta_ethtool_get_drvinfo,
        .get_ringparam  = mvneta_ethtool_get_ringparam,
        .set_ringparam  = mvneta_ethtool_set_ringparam,
+       .get_pauseparam = mvneta_ethtool_get_pauseparam,
+       .set_pauseparam = mvneta_ethtool_set_pauseparam,
        .get_strings    = mvneta_ethtool_get_strings,
        .get_ethtool_stats = mvneta_ethtool_get_stats,
        .get_sset_count = mvneta_ethtool_get_sset_count,