net: bcmgenet: Properly configure PHY to ignore interrupt

By the time we execute bcmgenet_mii_probe(), the MDIO bus structure has
long been allocated and registered. Overirring the PHY interrupt using
the MDIO bus structure has no chance to work anymore, because
of_mdiobus_register() has call phy_device_create() for use, which copied
the MDIO bus address's irq for the PHY into the PHY device "irq" member.

Since we do have a proper reference to a PHY device in
bcmgenet_mii_probe(), just assign the desired IRQ value here.

Fixes: aa09677cba42 ("net: bcmgenet: add MDIO routines")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index 0d775964b06016bfcc66352c99c0164c6957d773..457c3bc8cfff49654b45e879495e5cbfa88428d6 100644 (file)
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -401,7 +401,7 @@ int bcmgenet_mii_probe(struct net_device *dev)
         * Ethernet MAC ISRs
         */
        if (priv->internal_phy)
-               priv->mii_bus->irq[phydev->mdio.addr] = PHY_IGNORE_INTERRUPT;
+               priv->phydev->irq = PHY_IGNORE_INTERRUPT;
 
        return 0;
 }